Tektraco Libya

Call Directions Website Contact the business

Tektraco Libya Tektraco has been serving the Libyan market with Telecommunications, Laboratory and NDT equipment since 1990.

Coating performance depends on more than surface preparation and paint thickness. Before coating application, inspectors...
23/10/2026

Coating performance depends on more than surface preparation and paint thickness.

Before coating application, inspectors need to confirm that climatic conditions are suitable; including air temperature, surface temperature, relative humidity and dewpoint.

Elcometer climatic inspection instruments help monitor these conditions so coating work can proceed with better confidence and lower risk of condensation-related failures.

Learn more by clicking at https://www.elcometer.com/the-elcometer-guide-to-climatic-testing

Contact Us: [email protected], [email protected]

Ether NDE eddy current weld inspection equipment and weld probes support inspection of painted and coated welded structu...
16/10/2026

Ether NDE eddy current weld inspection equipment and weld probes support inspection of painted and coated welded structures, helping reduce preparation time, repainting work and access challenges.

This is especially useful for offshore structures, oil storage tanks, marine infrastructure and rope access inspection, where eddy current testing can be used as an alternative to MPI in suitable applications.

Learn more at https://ethernde.com/products/flaw-detectors/weldcheck-3

Contact Us: [email protected] or [email protected]

In oil and gas applications, installing the wrong alloy can create serious corrosion, welding and compliance risks.The H...
09/10/2026

In oil and gas applications, installing the wrong alloy can create serious corrosion, welding and compliance risks.

The Hitachi X-MET8000 Expert handheld XRF analyser helps inspection teams carry out rapid Positive Material Identification on pipes, valves, flanges, pressure vessels and fabricated components.

Fast alloy verification means fewer mix-ups, better traceability and greater confidence before installation, welding or commissioning.

Verify the alloy. Avoid mix-ups. Protect critical assets.

Asphalt laboratories are facing increasing pressure to complete more tests, reduce turnaround times and deliver more con...
02/10/2026

Asphalt laboratories are facing increasing pressure to complete more tests, reduce turnaround times and deliver more consistent data.

Humboldt automated asphalt testing solutions help improve workflow, reduce variability and minimise routine manual handling.

Automation can support greater consistency, higher productivity, improved safety and stronger testing decisions.

Less routine handling. More reliable data. Stronger pavements.

Contact Tektraco NDT for more information on Humboldt Asphalt Testing.

Radiographic testing does not need to be slowed down by film processing, consumables and delayed results.DR Systems offe...
29/09/2026

Radiographic testing does not need to be slowed down by film processing, consumables and delayed results.

DR Systems offers industrial digital radiography solutions for weld and corrosion inspection, including portable flat-panel detectors, flexible detectors for curved surfaces and automated pipeline weld inspection systems.

Digital image capture and DR-SOFT software help inspection teams review results faster and improve workflow.

Contact Tektraco NDT to learn more.

Protective coatings can affect ultrasonic thickness readings and make metal appear thicker than it really is.Selected in...
28/09/2026

Protective coatings can affect ultrasonic thickness readings and make metal appear thicker than it really is.

Selected instruments in the Dakota CX range use Echo-Echo/ThruPaint™ technology to measure the underlying metal thickness while ignoring compatible coatings up to 2 mm thick.

Ideal for corrosion surveys on painted or coated pipes, tanks, vessels and plates where removing the coating is not practical.

Measure through paint. Avoid coating removal. Get more reliable results.

Ground penetrating radar and artificial intelligence can work together to reveal what cannot be seen from the surface.In...
25/09/2026

Ground penetrating radar and artificial intelligence can work together to reveal what cannot be seen from the surface.

In this concrete wharf inspection, GPR and AI were used to support the detection of hidden issues and internal defects, helping make the inspection process more efficient.

A recent Screening Eagle case study demonstrates how ground-penetrating radar and AI-assisted interpretation can be used to investigate the internal structure of a concrete wharf and identify subsurface anomalies more efficiently.

Read Full Article - https://www.screeningeagle.com/en/inspection/ai-gpr-for-non-destructive-detection-of-the-internal-structure-of-a-concrete-wharf

Contact Tektraco to learn more.

Cathodic protection systems depend on reliable, low-resistance connections.Safetrack Pin Brazing provides a fast and dur...
23/09/2026

Cathodic protection systems depend on reliable, low-resistance connections.

Safetrack Pin Brazing provides a fast and durable solution for bonding cables to pipelines, tanks, ships, offshore structures and steelwork using a controlled low-temperature process.

Compared with thermite welding, PinBrazing uses controlled energy to limit heat input, avoids an exothermic reaction and does not melt the pipe surface, helping protect internal coatings.

Learn More (https://safetrack.se/images/user/safetrack-11.pdf)

Pin brazing Brochure Download -https://www.safetrack.se/images/user/Pinbrazing-Cathodic-Brochure.pdf

Contact us at [email protected], [email protected]

Safetrack provides specialised solutions designed to support reliable installation and maintenance across demanding rail...
07/09/2026

Safetrack provides specialised solutions designed to support reliable installation and maintenance across demanding railway and industrial environments.

From PinBrazing for durable cathodic protection and grounding connections to specialised equipment, tools and accessories used across pipelines, railways, tanks, offshore structures, marine applications and steelwork, Safetrack solutions are built with reliability and practical field use in mind.

Tektraco NDT can support you with Safetrack solutions for your next project.

Contact us at [email protected], [email protected].

Corrosion hidden under pipe supports?Corrosion under pipe supports can be difficult to inspect because the affected area...
26/08/2026

Corrosion hidden under pipe supports?

Corrosion under pipe supports can be difficult to inspect because the affected area is hidden, access is limited and traditional sizing methods may not provide enough information. Lifting pipes can also involve costly work and potential shutdowns.

Innerspec MRUT SIZING helps inspection teams detect and quantify corrosion in difficult-to-access areas, supporting more confident remaining-wall assessment without unnecessary access work.

Detect hidden corrosion. Size it with greater confidence. Reduce disruption.

Contact the Tektraco NDT team:

[email protected]
[email protected]

Address

176, Birkirkara Road
San Gwann
SGN4190

Opening Hours

Monday 07:00 - 15:00
Tuesday 07:00 - 15:00
Wednesday 07:00 - 15:00
Thursday 07:00 - 15:00
Friday 07:00 - 15:00

Telephone

+35621374300

Website

Alerts

Be the first to know and let us send you an email when Tektraco Libya posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tektraco Libya:

Shortcuts

Share

Category