Jinan All Best Laser Technology Co., Ltd

Directions Website

Jinan All Best Laser Technology Co., Ltd Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Jinan All Best Laser Technology Co., Ltd, Machine Shop, J1, High-tech Wanda office building, Shandong Province, Jinan.

23/10/2026

Fully Enclosed Pallet-Changing Laser Cutter – Thick Stainless Steel Cutting Demo

Thick stainless steel is one of the tougher challenges for laser cutting. The material reflects a significant portion of the beam, conducts heat away quickly, and demands a stable molten pool through the entire kerf. Add a pallet changer and full enclosure, and you have a system built for continuous production on demanding material.

What this demo shows:

A thick stainless steel plate cut in a single pass. Nitrogen assist keeps the cut edge clean and oxide-free, while the laser maintains stable pe*******on through the full thickness. The fully enclosed design contains the process—viewing windows allow safe monitoring, and fume extraction handles the smoke. The pallet changer keeps the machine cutting while the next sheet is loaded.

Why this configuration works for thick stainless:

Nitrogen assist – clean edge, no oxidation

Stable power delivery – consistent pe*******on at thickness

Pallet exchange – continuous production, no loading downtime

Full enclosure – safe operation, clean workspace

Key specs:

Material: Thick stainless steel

Assist gas: Nitrogen

Pallet exchange: simultaneous load and cut

Positioning accuracy: ±0.03mm

Thick stainless. Continuous cutting. Clean edges.

DM me “Thick stainless demo” for the full cutting video.

22/10/2026

Laser Welding Demo – Bead Quality You Can See

A weld is judged by how it looks and how it holds. This demo shows both.

What this demo shows:

The laser runs a single pass along the joint. The bead comes out uniform—consistent width, smooth surface, no spatter, no undercut. Pe*******on is full, with no porosity visible on the cross-section. The heat-affected zone stays narrow, so the surrounding material keeps its original finish.

Why the bead looks this clean:

Laser welding concentrates energy into a tight spot. The melt pool forms and solidifies quickly, which limits heat spread and keeps the bead neat. There's no wire spatter, no slag to chip off, and no grinding needed afterward.

Where this result matters:

Visible welds on stainless and carbon steel

Parts that go straight to coating or assembly

Jobs where post-weld cleanup would add cost

Clean bead. Full pe*******on. No cleanup.

DM me "Welding demo" for the full video.

21/10/2026

Laser Welding Demo – Clean Beads, Deep Pe*******on, No Post-Weld Grinding

Laser welding isn't just faster than TIG or MIG—it produces a different class of weld. Narrow heat-affected zone, minimal distortion, and a bead that comes off the machine ready for the next step.

What this demo shows:

The laser welds a joint in a single pass. The weld bead is uniform and smooth, with full pe*******on and no undercut or porosity. The heat-affected zone stays narrow, so the surrounding material doesn't warp or discolor. No post-weld grinding is needed—the bead is clean enough to leave as-is or go straight to coating.

Why laser welding delivers this result:

The focused beam concentrates energy into a small area, melting the material quickly and letting it solidify fast. That fast thermal cycle is what keeps distortion low and the heat-affected zone tight. The result is a weld that looks clean and performs clean.

Where it fits:

Stainless and carbon steel fabrication

Thin to medium plate welding

Visible weld applications where appearance matters

Parts that can't tolerate post-weld distortion

Clean bead. Deep pe*******on. No grinding.

DM me "Laser welding demo" for the full video.

20/10/2026

4020 Fully Enclosed 20kW Laser Cutter – 40mm Carbon Steel Cutting Demo

Cutting 40mm carbon steel puts the machine in the heavy-plate category. At this thickness, power density, focus control, and gas flow all have to work together—and the enclosure keeps the process contained.

What this demo shows:

A 40mm carbon steel plate cut in a single pass. The 20kW laser delivers the power density needed to maintain a stable molten pool through the entire kerf. Oxygen assist drives the exothermic reaction that helps push through thick sections. The cut edge comes out clean, with minimal dross and good verticality—weld-ready without secondary grinding.

Why this configuration matters:

The 4020 work area handles oversized plates in one setup. The fully enclosed design keeps the cutting zone isolated, with protective viewing windows for safe monitoring and integrated fume extraction for the smoke generated by thick plate cutting. At 20kW, the machine has enough headroom to cut 40mm consistently, not just at the limit.

Key specs:

Work area: 4000×2000mm

Laser power: 20kW

Material: 40mm carbon steel

Assist gas: Oxygen

Positioning accuracy: ±0.03mm

Thick plate. One pass. Weld-ready.

DM me "4020 40mm" for the full cutting video.

19/10/2026

High-Performance CNC Electro-Hydraulic Press Brake – Live Demo

This machine combines CNC control with electro-hydraulic drive—two systems working together to deliver precise, repeatable bends on every stroke.

What this demo shows:

The CNC back gauge positions the sheet automatically between bends, eliminating manual measuring and layout time. The electro-hydraulic system drives the ram with precise force control, maintaining bend angle consistency across the full workpiece length. Multi-axis control handles complex geometries without repositioning.

Why electro-hydraulic matters:

The hydraulic system provides the tonnage needed for thick plate, while the CNC control ensures the ram position and bending depth are accurate to within tight tolerances. The result is consistent angles part after part—no springback surprises, no rework.

Key capabilities:

CNC-controlled ram depth and back gauge positioning

Electro-hydraulic drive for stable force output

Multi-axis control for complex bends

Consistent angles across the full workpiece

From thin sheet to thick plate—precision bending, repeatable results.

DM me "Electro-hydraulic press brake" for the full demo video.

16/10/2026

4020 Fully Enclosed Laser Cutter – 30mm Carbon Steel Cutting Demo

Cutting 30mm carbon steel is thick plate territory. At this thickness, the machine needs enough power density to maintain a stable molten pool through the entire kerf, and the enclosure keeps the process contained.

What this demo shows:

A 30mm carbon steel plate cut in a single pass. Oxygen assist drives the exothermic reaction that helps the laser push through the thick section. The cut edge comes out clean, with minimal dross and good verticality. The fully enclosed design keeps the cutting zone isolated—protective viewing windows allow safe monitoring, and integrated fume extraction handles the smoke generated by thick plate cutting.

Why 30mm carbon steel is different:

At this thickness, the laser needs stable power output and precise focus control. The oxygen flow must be tuned—too little and the cut stalls, too much and the edge oxidizes excessively. The result here is a weld-ready edge with no secondary grinding needed.

Key specs:

Work area: 4000×2000mm

Material: 30mm carbon steel

Assist gas: Oxygen

Enclosure: Fully enclosed with viewing windows

Positioning accuracy: ±0.03mm

Thick plate. One pass. Weld-ready.

DM me "4020 carbon" for the full cutting video.

15/10/2026

Precision Tube Laser Cutting Machine | Smooth Cut, No Burrs — Carbon Steel Square Tube Demo

Cut. Done. No secondary processing.

Watch our precision tube laser cutting machine slice through carbon steel square tubes with a perfectly smooth, burr-free cut edge — every single time.

🔸 Smooth cut edge — no deburring, no grinding, no extra labor
🔸 High-precision fiber laser cutting on carbon steel square tubes
🔸 Fast cutting speed with stable, repeatable accuracy
🔸 Works on round, square, rectangular, and special profile tubes

Stop wasting time and money on secondary processing. One machine, one pass, finished part.

📩 Want to test it on your own tube samples or get a quote?
Send us a message to arrange a demo!

👇 Watch the video — the cut edge speaks for itself.

14/10/2026

Precision Tube Cutting Machine – Round & Square Holes on Square Tube

Drilling holes on square tube has always been a two-step process: mark the position, then drill. For round holes, that means a drill press. For square holes, it means broaching or filing. Both add handling time and introduce alignment errors.

What this demo shows:

Round and square holes cut into square tube in a single setup. No marking, no drill press, no secondary operations. The laser cuts both hole shapes directly—round holes come out clean, square holes have sharp corners and straight edges.

Why this matters for fabrication:

One setup – cut to length and drill holes in the same operation

Any hole shape – round, square, rectangular, or custom profiles

No secondary drilling – eliminates a separate workstation

Consistent accuracy – hole positions stay true across the batch

Key capabilities:

Round tube: Φ10-120mm

Square tube: 10×10-120×120mm

Hole shapes: round, square, rectangular, custom

Positioning accuracy: ±0.03mm

One machine. One setup. Holes and cuts done.

DM me "Tube hole cutting" for the full demo video.

13/10/2026

6020 Semi-Enclosed Plate & Tube Combo Cutter – 20mm Carbon Steel Cutting Demo

The 6020 semi-enclosed combo machine brings plate and tube processing into one platform, with an enclosure that shields the cutting zone while keeping the worktable accessible for loading.

What this demo shows:

A 20mm carbon steel plate cut in a single pass. Oxygen assist drives the exothermic reaction that helps the laser push through the thick section. The cut edge comes out clean, with minimal dross and good verticality—ready for welding without secondary grinding.

Why this configuration works:

The semi-enclosed design protects the operator from the cutting zone without the full-enclosure footprint. The 6000×2000mm work area handles large plates in one setup. When tube jobs come in, the same machine switches over—no second machine needed.

Key specs:

Work area: 6000×2000mm

Material: 20mm carbon steel

Assist gas: Oxygen

Positioning accuracy: ±0.03mm

Repeat positioning accuracy: ±0.02mm

Thick plate. One pass. Weld-ready.

DM me "6020 carbon" for the full cutting video.

12/10/2026

6kW Laser Cleaning Machine – Paint Removal Demo

Paint removal on a large scale is where lower-power cleaning systems start to struggle. Thick coatings, multiple layers, large surface areas—each adds time and passes to the job.

A 6kW laser cleaning machine handles it differently. Higher power density means faster removal, fewer passes, and the ability to strip thick paint layers in a single sweep.

What this demo shows:

A painted metal surface cleaned back to bare metal with the 6kW system. The laser strips the coating layer by layer, leaving the substrate untouched—no scratches, no chemical residue, no abrasive media to dispose of. The cleaned surface comes out uniform and ready for recoating or welding.

Where 6kW makes the difference:

Thick paint layers – stripped faster than lower-power systems

Large surface areas – higher cleaning rate covers more ground

Multiple coating layers – removed in fewer passes

Industrial equipment, ship hulls, steel structures – heavy-duty paint removal

Key specs:

Power: 6kW

Process: Non-contact, no consumables, no chemicals

Waste: Dry dust only, collectable

No chemicals. No abrasives. No waste stream. Just clean metal.

DM me "6kW paint removal" for the full demo video.

Address

J1, High-tech Wanda Office Building, Shandong Province
Jinan
250200

Website

Alerts

Be the first to know and let us send you an email when Jinan All Best Laser Technology Co., Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category