15/09/2026
๐ก๏ธ TUESDAY TIPS: Is Your Cutting Torch Popping Mid-Cut?
When you're slicing through heavy steel plate, hearing a loud "pop" or whistling sound from your torch tip means gas flow is unstable, putting your setup at risk of a flashback! ๐ฅโก
This Tuesday, let's go over critical safety and maintenance rules for the IOXYGEN Hand Cutting Torch:
Cutting torches rely on balanced preheat flames and a high-pressure oxygen cutting jet. When carbon slag plugs up the tip ports, gas backs up inside the torch body, creating thermal instability.
Essential Operating Tips: ๐จ
1. Clean the Nozzle Properly: Use smooth, straight strokes with a calibrated tip cleaner file to remove splatter without scratching the brass gas ports.
๐ก๏ธ 2. Check Torch Valves & Arrestors: Ensure your fuel and oxygen valves seal tight without gas leaks, and never ignite a torch without certified flashback arrestors attached.
๐ 3. Set Correct Pressures: Always set line pressures according to tip size, starving the torch of oxygen or fuel causes the flame to burn back inside the head!
Work safe, keep your nozzles clean, and tackle heavy fabrication with complete peace of mind! ๐ค
๐ Shop cutting torches, nozzles & oxy-fuel safety gear online: https://www.ragsons.co.ke/shop/
๐ Call/WhatsApp us to place your order today.