Fluke Jordan

Directions Website

Fluke Jordan "Pan Arab Technology (PATCO) is the authorized distributor of Fluke Industrial Group, Fluke Calibration, and Fluke Reliability products in Jordan.

We offer comprehensive support and after-sales service, including full warranty assistance."

Fluke FEV500 Fast DC EV Charger AnalyzerThe Fluke FEV500 Fast DC EV Charging Station Analyzer is an all-in-one, field-re...
03/06/2026

Fluke FEV500 Fast DC EV Charger Analyzer

The Fluke FEV500 Fast DC EV Charging Station Analyzer is an all-in-one, field-ready instrument specifically designed for testing, commissioning, and maintaining Level 3 Fast DC electric vehicle charging stations (EVSE)

Historically, verifying a DC fast charger required bringing an actual electric vehicle on-site, using heavy external load banks, or opening the dangerous high-voltage panels of the charging cabinet. The FEV500 solves this by consolidating multiple instruments (a vehicle simulator, protocol analyzer, insulation tester, and low-ohm meter) into a single wheeled, rugged enclosure.

1. Key Features & Operational Capabilities

*Vehicle-Free Simulation: It acts as a virtual electric vehicle. It communicates natively with the charger via standard protocols (CCS1 or CCS2 variants), establishing a handshake, requesting power, and stepping through charging states without needing a car or separate load bank.

*Non-Invasive Diagnostic Testing: Technicians can complete all safety and functional diagnostics directly through the vehicle's standard charging connector, eliminating the high-voltage exposure risks associated with opening cabinet enclosures.

*Energy Harvesting Power System: The device runs on a field-swappable battery. Impressively, it can harvest and recharge its internal battery using the energy delivered from the EVSE during active load tests.

* Guided Touchscreen Workflows: Features an intuitive auto-test interface with rapid PASS/FAIL indications. It walks field technicians step-by-step through complex regulatory validation workflows without requiring specialized advanced training.

2. Documentation & Software Integration
To satisfy compliance audits (such as ISO/IEC 17025 traceability or public municipal infrastructure records), manual data tracking is completely eliminated:
** Internal Data Logging: The unit captures all measurements, errors, and protocol handshakes internally.
** Fluke TruTest™ Software Integration: Data is exported seamlessly via a USB-C port to TruTest software, allowing asset managers to easily generate professional compliance reports, track historical station degradation, and manage multi-site depot inspections.

***Available Variations
The device is typically sold in configurations tailored to specific regional plug profiles:

**Fluke FEV500/CCS1 (Commonly used in North America)
**Fluke FEV500/CCS2 (Commonly used in Europe and international markets)
**Available as a PRO kit (bundled with advanced TruTest reporting licenses) or with Premium Care (FPC) support plans.

***The Fluke FEV500 is built directly into a heavy-duty wheeled transit case to withstand harsh outdoor environments during depot or roadside diagnostic inspections.

***Crucial Form Factor Details:
*The Charging Inlet: As shown in the panel layout view, the charger's plug inputs directly into a rugged, heavy-duty built-in receptacle matching the regional standard (the image displays a CCS2 inlet profile commonly used for high-voltage DC safety validation).

*Weatherproof Enclosure: The physical chassis mimics a tactical flight case. This allows service technicians to easily wheel the unit directly to public transit depots, highway rest stops, or industrial distribution facilities regardless of ground conditions.

*Integrated Display Panel: The central colored touchscreen handles manual setting adjustments, showing the current state of communication (PLC or SLAC handshake) alongside direct insulation and grounding values.








Pan Arab technology
شركة الشرق العربي للتكنولوجيا الوكيل الحصري في الأردن لمنتجات فلوك العالمية
للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
0790177669
أو عبر الإيميل
[email protected]
https://patco-jo.com

Fluke 5730AThe Fluke 5730A High-Performance Multifunction Calibrator is the undisputed "gold standard" in electrical met...
03/06/2026

Fluke 5730A

The Fluke 5730A High-Performance Multifunction Calibrator is the undisputed "gold standard" in electrical metrology. It is engineered for primary calibration laboratories, national metrology institutes, and high-precision testing facilities that must maintain strict compliance with standards like ISO/IEC 17025.

It is primarily designed to calibrate high-precision digital multimeters (DMMs) up to 8.5 digits, such as the Fluke 8588A or 8508A, as well as a wide array of RF voltmeters, loop calibrators, and power meters.

1. Core Sourcing CapabilitiesThe 5730A generates extremely stable, low-noise electrical signals across a vast envelope. Its primary functions include:
*DC Voltage: Outputs from 0 V to +- 1100 V with absolute uncertainties as low as 3.5 ppm (parts per million) over one year.

*AC Voltage: Outputs from 220 m V to 1100 V over a frequency range of 10 Hz to 1 MHz, delivering exceptional harmonic purity and low distortion.

*DC & AC Current: Sources current from 0 A to 2.2 A internally.

*Resistance: Features discrete, highly stable internal reference standards in x10 steps.

2. Advanced Technology & Features
*Artifact Calibration (Internal Traceability)
One of the most powerful economic and technical advantages of the 5730A is its Artifact Calibration.

*Using its internal ratiometric circuitry, the device precisely transfers these references across all ranges, functions, and frequencies internally. This drastically reduces downtime and external calibration costs.

***Visual Connection Management
To protect both the operator and the highly sensitive internal circuitry, the 5730A features an interactive front panel interface. The output terminals are equipped with internal LEDs (Visual Connection Management). When a specific function is selected, the correct terminals light up bright green, guiding the technician on exactly where to plug in the test leads and minimizing the risk of catastrophic connection errors.

***Backward Compatibility (Emulation Mode)
For legacy calibration laboratories running automated software routines, the 5730A features a 5700A/5720A Emulation Mode. It interprets legacy remote commands natively. You can drop the 5730A into an existing automated system (using MET/CAL or custom software) without rewriting code.

3. System Expansion Options
If your lab handles heavy industrial equipment or high-current clamp meters, the 5730A acts as the central brain and can be paired with companion amplifiers:

*Fluke 52120A Transconductance Amplifier: Boosts the 5730A’s current output up to 120 A AC/DC (or up to 3000 A when using associated coil accessories) to calibrate high-range current clamps and Rogowski coils.

*Fluke 5725A Amplifier: Enhances the 5730A’s high-frequency AC voltage-frequency product (Volt-Hertz limit) and extends the continuous AC/DC current sourcing up to 11 A.

***Key Visual Interfaces to Look For:
*The Touchscreen Interface: The prominent central display replaced the old mechanical rubber buttons from the legacy 5700A series. It displays the active output value, signal frequency, and uncertainty calculations in real time.

*Visual Connection Management: On the left side of the unit, the terminal output jacks feature internal LED rings. When you select a specific output sequence (like a 4-wire resistance or high-voltage DC), the exact terminals required for the test leads illuminate to prevent incorrect wiring.

*USB & Automation Integration: A front-facing USB port allows for easy firmware updates and configuration transfers, while the physical tuning wheel on the right allows for fine ratiometric increments during manual calibrations.








Pan Arab technology
شركة الشرق العربي للتكنولوجيا الوكيل الحصري في الأردن لمنتجات فلوك العالمية
للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
0790177669
أو عبر الإيميل
[email protected]
https://patco-jo.com

Fluke SmartTrace 2082 It is a professional-grade underground utility locator used to detect and trace buried cables and ...
31/03/2026

Fluke SmartTrace 2082

It is a professional-grade underground utility locator used to detect and trace buried cables and pipes. It’s widely used in electrical, telecom, and construction industries.

🔧 What does it do?
*Locates underground cables and pipes
*Traces the exact path of buried utilities
*Detects faults or breaks in cables
*Measures the depth of cables before excavation

👉 Commonly used by:
*Electrical technicians
*Utility companies
*Construction and excavation teams

⚙️ How does it work?
The system typically includes:
*Transmitter – sends a signal into the cable
*Receiver – detects and follows the signal above ground
*A-Frame (AF2082) – pinpoints fault locations accurately

🔎 It works by injecting an electrical signal into the cable and tracking that signal from the surface.

⭐ Key Features
*High accuracy in locating underground utilities
*Works on both energized and de-energized cables
*Depth measurement up to ~6 meters
*Signal detection range up to ~30 meters
*Safety rating: CAT IV 600V
*Rugged design for field conditions

📦 Available Versions
*2082 Core – basic package
*2082BT Elite – includes Bluetooth features
*2082BT Premium – full kit with all accessories

🧠 When do you need it

You’ll benefit from this device if you:
*Work with underground electrical or telecom systems
*Need to avoid accidental cable damage during digging
*Perform maintenance or troubleshooting on buried lines

The Fluke 2082 is:
✔ Highly accurate
✔ Safe for electrical environments
✔ Ideal for professional field work








Pan Arab technology
شركة الشرق العربي للتكنولوجيا الوكيل الحصري في الأردن لمنتجات فلوك العالمية
07 9017 7669
للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
أو عبر الإيميل
[email protected]
https://patco-jo.com

📌Fluke PVA-1500 Series PV Analyzer / I-V Curve TracerThe Fluke PVA-1500 Series is a high-precision PV Analyzer and I-V C...
01/02/2026

📌Fluke PVA-1500 Series PV Analyzer / I-V Curve Tracer

The Fluke PVA-1500 Series is a high-precision PV Analyzer and I-V Curve Tracer designed for commissioning, maintenance, troubleshooting, and performance auditing of solar PV systems. It measures current vs voltage (I-V) and power vs voltage (P-V) curves for PV strings or modules — helping detect performance issues, verify energy output, and establish baseline performance data.

✔️ Key Features:
*Measures and displays I-V curves up to 1500 V DC and up to 30 A of current.
*Generates key PV performance parameters like Isc, Voc, Imp, Vmp, Pmax, fill factor, and performance factor.
*Uses a capacitive load for accurate curve tracing at the string level.
*Wireless connectivity to tablet/laptop (Windows) for safer setup and data viewing.
*Includes a SolSensor™ Wireless PV Reference Sensor for irradiance, module temperature, and tilt measurements.
*High throughput — can perform many sweeps quickly (e.g.,

📊 Fluke 985 Particle CounterFluke 985 Airborne Particle Counter is a portable instrument designed to measure and report ...
01/02/2026

📊 Fluke 985 Particle Counter

Fluke 985 Airborne Particle Counter is a portable instrument designed to measure and report airborne particle concentrations in environments where air cleanliness matters — from HVAC filter testing to indoor air quality assessments and cleanroom monitoring.

🧪 Key Capabilities:
*Multi-channel particle measurement: Six size channels covering 0.3 µm to 10 µm — useful for assessing a range of particulate sizes in air.
*Portable and ergonomic: Lightweight and easy to operate with one hand, suitable for fieldwork.
*Long battery life: Up to ~10 hours typical use per charge.
*Large color display: 3.5″ QVGC color screen with intuitive icons and trend-graph capabilities.
*Data logging: Stores up to 10 000 records with timestamps.
*Flexible data export: Export via USB cable, USB memory stick, or Ethernet to a PC — no special software required.
*Configurable alarms: User-defined alarm limits for various particle counts.

📐 Technical Specs:
*Flow rate: 0.1 cfm (≈ 2.83 L/min)
*Light source: 775–795 nm, class 3B 90 mW laser
*Counting modes: Raw counts, #/m³, #/ft³, #/liter (cumulative or differential)
*Counting efficiency: 50 % @ 0.3 µm; 100 % > 0.45 µm (ISO 21501)
*Zero count: ~1 count/5 minutes (JIS B9921)
*Physical: ~0.68 kg (1.5 lb); 27.2 × 9.9 × 5.3 cm
*Operating environment: 10 °C to 40 °C (50 °F to 104 °F), < 95 % RH non-condensing
*Accessories: Charging cradle (USB/Ethernet), cables, battery, filters, protective caps, and hard carrying case included.

🛠 Typical Uses:
• HVAC filter performance testing
• Indoor air quality (IAQ) investigations
• Cleanroom and controlled environment monitoring
• Troubleshooting particle sources
• Preventive maintenance programs
• Reporting air quality to customers

Counter









Pan Arab Technology
شركة الشرق العربي للتكنولوجيا الوكيل الحصري في الأردن لمنتجات فلوك العالمية
للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
07 9017 7669

أو عبر الإيميل
[email protected]
https://patco-jo.com

Fluke 1630‑2 FC Earth Ground Clamp Meter📌 What It IsThe Fluke 1630‑2 FC is a stakeless earth/ground resistance clamp met...
05/01/2026

Fluke 1630‑2 FC Earth Ground Clamp Meter

📌 What It Is
The Fluke 1630‑2 FC is a stakeless earth/ground resistance clamp meter that lets you measure ground loop resistance and AC leakage current safely and quickly — especially in multi‑grounded systems where using auxiliary ground rods is difficult or unsafe.

🔍 Key Features
⚡ Stakeless Ground Resistance Measurement
*Uses a dual‑jaw clamp to measure earth/ground loop resistance without disconnecting ground electrodes or driving test stakes into soil.
*Ideal for testing grounds in indoor, paved, or restricted spaces where traditional methods can’t be used.

📈 AC Leakage Current Detection
*Measures AC leakage current that may be flowing in a grounding system — useful for troubleshooting safety and performance issues.
*Helps find leakage problems without disruptive wiring changes.

💾 Data Logging
*Automatically logs measurements at set intervals.
*Can save up to 32,760 readings in memory — handy for long‑term testing and reporting.

📱 Fluke Connect® Wireless Support
*Bluetooth‑enabled to connect to the Fluke Connect app (on smartphone/tablet) for real‑time viewing, storing, and sharing of test results.
*Makes collaborative diagnostics and historical tracking easier.

🛠 Rugged Jobsite Design

*Heavy‑duty jaw stays aligned and calibrated in harsh on‑site conditions.
*Large 9999‑count digital display for clear readings.

🧰 Typical Uses

✔ Verify earth/ground system quality — quickly check grounding in industrial, commercial, or utility sites where earth rods can’t be driven easily.
✔ Leakage current detection — measure unwanted AC current in grounding systems that might indicate faults or safety issues.
✔ Maintenance & troubleshooting — log and analyze grounding values over time to identify degradation or intermittent issues.

📦 What’s Usually Included
*Fluke 1630‑2 FC Earth Ground Clamp
*Hard carry case
*Ground loop resistance standard (for calibration check)
4 × AA batteries
*Quick reference and safety guide

📌 Why It’s Useful
Traditional earth resistance testing requires disconnecting the earth electrode and driving auxiliary stakes into the ground — which can be slow, unsafe, or impossible indoors or on paved surfaces. The Fluke 1630‑2 FC solves that by using a clamp‑on method and adds logging plus wireless data capabilities for modern maintenance and diagnostics.







نحن الوكيل الحصري في الأردن لمنتجات فلوك العالمية للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
0790177669
أو عبر الإيميل
[email protected]
https://patco-jo.com

Fluke 1550C KIT📌 What the FLUKE 1550C KIT IsThe Fluke 1550C KIT is a 5 kV digital insulation resistance tester kit desig...
05/01/2026

Fluke 1550C KIT

📌 What the FLUKE 1550C KIT Is
The Fluke 1550C KIT is a 5 kV digital insulation resistance tester kit designed for high‑voltage insulation testing on electrical assets such as motors, generators, cables, switchgear, transformers, and other equipment susceptible to insulation degradation. It’s widely used in commissioning, troubleshooting, and preventive/predictive maintenance programs.

⚡ Key Capabilities

🔧 High‑Voltage Insulation Testing
*Performs DC insulation tests up to 5000 V (5 kV) — suitable for medium and high‑voltage electrical systems.
*Measures insulation resistance up to ~1 TΩ (teraohm), enabling detection of early insulation breakdown.

📊 Advanced Measurement & Analysis
*Automatically calculates Polarization Index (PI) and Dielectric Absorption Ratio (DAR) — useful indicators of insulation condition.
*Capacitance and leakage current measurement, helping differentiate insulation issues from surface leakage.
*Ramp function and programmable timer (up to ~99 min) for controlled stress tests and breakdown analysis.
*Internal memory to store up to ~99 test results for analysis and reporting.
*Live circuit voltage warning alerts you if hazardous voltage is present before testing.

🛡 Safety & Durability
*CAT IV 600 V / CAT III 1000 V safety categories — appropriate for commercial and industrial environments.
*Rugged build suitable for field use.

📦 What’s Included in the 1550C KIT
The kit typically includes:
✔ Fluke 1550C insulation resistance tester (5 kV)
✔ Heavy‑duty test leads with alligator clips (red, black, green)
✔ IR‑to‑USB adapter with interface cable
✔ AC power cord
✔ IP67 hard case for transport/storage
✔ Calibration certificate
✔ Manuals and quick‑reference guides
✔ Software license and installation guides

🧰 Typical Uses
💡 Preventive & Predictive Maintenance — find insulation deterioration before failures occur.
💡 Commissioning Tests — verify insulation quality on new installations.
💡 Troubleshooting Faults — detect compromised insulation on motors, cable runs, and generators.
💡 Compliance Testing — perform documented insulation measurements for standards or safety requirements.







نحن الوكيل الحصري في الأردن لمنتجات فلوك العالمية للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
0790177669
أو عبر الإيميل
[email protected]
https://patco-jo.com

Fluke 1507 Insulation Resistance TesterWhat the Fluke 1507 IsThe Fluke 1507 is a digital insulation resistance tester de...
05/01/2026

Fluke 1507 Insulation Resistance Tester

What the Fluke 1507 Is
The Fluke 1507 is a digital insulation resistance tester designed for commissioning, troubleshooting, preventive maintenance, and safety testing of electrical installations, motors, cables, and equipment. It measures insulation resistance up to very high levels and includes additional functions such as continuity and voltage checks — all in a rugged, easy-to-use package.

🔍 Key Features

🧪 Insulation Resistance Testing
*Measures insulation resistance from 0.01 MΩ up to 10 GΩ.
*Test voltages selectable: 50 V, 100 V, 250 V, 500 V, 1000 V — ideal for a wide range of insulation checks on wiring and electrical assets.
*Includes live circuit detection to prevent testing if dangerous voltage is present (>30 V).
*Auto discharge of capacitive voltage adds safety after tests.

⚡ Additional Electrical Measurements
*AC/DC voltage: from 0.1 V to 600 V.
*Continuity / resistance: 0.01 Ω to 20 kΩ with a 200 mA test current
*Earth bond / loop tests: offer useful supplementary checks during commissioning or maintenance.

📊 Advanced Functions
*Polarization Index (PI) and Dielectric Absorption Ratio (DAR) calculated automatically — helpful for insulation quality assessments over time.
*PASS/FAIL compare function speeds repetitive testing.
*Large backlit display for clear readings in low-light conditions.

🔒 Safety & Robustness
*CAT IV 600 V overvoltage category rating — suitable for electrical mains and industrial environments.
*Rugged, compact design with remote test probe for hard-to-reach points.
*Runs on four AA alkaline batteries, providing ≥1000 insulation tests per set.

📦 What’s Included
*Fluke 1507 insulation tester.
*Remote probe for easy repetitive testing.
*Test leads, probes, and alligator clips.
*Holster and user documentation.

💡 Typical Uses
✔ Electrical installation commissioning — verify insulation before energizing systems
✔ Preventive maintenance — find deteriorating insulation on motors, cables, transformers
✔ Troubleshooting faults — diagnose insulation degradation or leakage paths
✔ Safety verification tests in industrial, commercial, or utility environments.







نحن الوكيل الحصري في الأردن لمنتجات فلوك العالمية للتواصل والاستفسار التواصل معنا عبر رقم الهاتف
0790177669
أو عبر الإيميل
[email protected]
https://patco-jo.com

Address

Abdullah Ghosheh Street Complex No. 38 4th Floor
Amman
11118

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 15:00
Saturday 09:00 - 15:00
Sunday 09:00 - 17:00

Website

Alerts

Be the first to know and let us send you an email when Fluke Jordan posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category