Quali sono gli orari di apertura?

Lunedì 08:00 - 17:00 Martedì 08:00 - 17:00 Mercoledì 08:00 - 17:00 Giovedì 08:00 - 17:00 Venerdì 08:00 - 17:00

Yamato Roll Eu

Name: Yamato Roll Eu
Address: Via Degli Andreani 9, Sasso Marconi, 40037, IT
Telephone: +39051735744

Casa
Italia
Sasso Marconi
Yamato Roll Eu

Supplier of commercial and industrial equipment.

26/08/2026

Una sola tecnologia di rullatura per fori, alberi, coni, raccordi e sfere.

Gestire un utensile diverso per ogni geometria aumenta setup e magazzino. La gamma Yamato copre applicazioni interne, esterne, alberi, conicità, superfici, raccordi e sfere, oltre a utensili single roll, autocompensanti, compatti per torni svizzeri e soluzioni custom su disegno.
Una sola famiglia, copertura applicativa completa.

Invia il disegno del pezzo a Yamato: individuiamo l'utensile più adatto.

[email protected] | yamatoroll.eu

18/08/2026

One roller burnishing technology for holes, shafts, cones, fillets and spheres.

Managing a different tool for every geometry adds setup time and inventory. The Yamato range covers internal, external, shaft, conical, surface, fillet and spherical applications, plus single roll, self-compensating and compact tools for Swiss lathes, and custom solutions on drawing.

One family, full application coverage.
Send your part drawing to Yamato: we'll identify the best tool.

[email protected] | yamatoroll.eu

13/08/2026

La marcatura offline aggiunge movimentazione, allunga il tempo ciclo e interrompe la tracciabilità tra lavorazione e identificazione.

Yamaki-Pen marca i pezzi direttamente su centri CNC, torni, torni svizzeri e macchine multitasking, con tecnologia a punta in metallo duro: compensazione della distanza fino a circa 6 mm, materiali fino a circa 62 HRC, avanzamento oltre 5.000 mm/min.

La marcatura diventa parte del ciclo di lavorazione, non un'operazione a valle.

Ti serve una marcatura CNC integrata? Scopri Yamaki-Pen di Yamato.
[email protected] | yamatoroll.eu

10/08/2026

Offline part marking adds handling, extends cycle time and breaks traceability between machining and identification.

Yamaki-Pen marks parts directly on CNC machining centers, lathes, Swiss-type lathes and multitasking machines, with carbide-needle technology: distance compensation up to ~6 mm, materials up to ~62 HRC, feed speed above 5,000 mm/min.

Marking becomes part of the machining cycle, not a downstream step.

Need integrated CNC marking? Discover the Yamato Yamaki-Pen.
[email protected] | yamatoroll.eu

21/07/2026

🔴 Finishing a part off-machine defeats the whole point of single-setup Swiss machining.

Standard burnishing tools are too bulky for sliding head sub-spindles — so the part leaves the machine for a secondary operation. In medical, dental and automotive precision turning, that's lost time and lost traceability.

Yamato's compact roller burnishing tools are built for Swiss-type lathes:

→ Small footprint for tight sub-spindle space
→ Full ROBUTO® performance — Ra < 0.05 µm in one pass
→ Finishing inside the same Swiss lathe machining cycle
→ Curved, conical, cylindrical — up to 45 HRc

Parts that should run complete, run complete. ✅

Compact burnishing tools for your Swiss lathes? [email protected]

10/07/2026

🔴 Grinding, honing, lapping — three steps for a surface one pass can deliver.

Multi-step finishing is where cycle time and cost pile up. And even at the right roughness number, abrasive methods leave sharp projections at the contact plane.

Yamato ROBUTO® roller burnishing is chipless: it displaces material instead of removing it, replacing several secondary operations in a single pass.

→ Ra ≤ 0.05 µm in one pass
→ Higher hardness + corrosion resistance from cold working
→ Thousands of pieces, very long lasting before mantenance
→ Ø30 × 100 mm part in 10–15 s ⏱️

Faster, cheaper, no major investment.

Consolidate your finishing → yamatoroll.eu | [email protected]

29/06/2026

Mirror finish. One pass. Ra < 0.05 µm.

If achieving low surface roughness still requires grinding, honing or lapping, you're carrying hidden cost in cycle time and equipment. And even at equivalent Ra values, abrasive methods leave sharp projections at the contact plane.

Yamato ROBUTO® roller burnishing replaces multiple finishing steps with one chipless operation:

📌 Ra ≤ 0.05 µm in one pass
📌 Faster production at lower cost
📌 Work-hardened surface, increased corrosion resistance
📌 A Ø30 × 100 mm part: burnished in 10–15 seconds

10,000–300,000 pieces with no maintenance cost.

Contact Yamato to evaluate your component:
[email protected]
https://www.yamatoroll.eu/

24/06/2026

Surface discontinuities are stress risers. Stress risers are where fatigue starts.

On turbine shafts, crankshafts and high-load axles, tool marks become the first failure points under cyclic loading. Standard finishing methods don't induce the beneficial residual stress field that critical components actually need.

Yamato SKUV30 deep rolling tools change the equation:

👉🏻 Compressive residual stress in one operation
👉🏻 Work-hardened surface layer
👉🏻 Chipless, in-machine process
👉🏻 Designed for connection radiuses and high-load surfaces

A surface integrity treatment that doesn't add a separate process step.

Talk to Yamato about your critical components:
[email protected]
https://www.yamatoroll.eu/

07/04/2026

🔴 Yamaki-H Coolant Driven – Micro Percussion Coolant Driven Needle
✅ The hydraulic marking tool works on the principle of dot peening.
✅ The carbide needle starts to oscillate as soon as the coolant system is activated.
✅ It makes deeper markings than pneumatic marking tools, because high power-pressurized coolant is used.
✅ Thanks to the high frequency of strokes generated by the turbine system inside the tool, the marked text/shape appears as a contunious line.
✅ All stainless steel body and components.
✅ Tool can be used on machining centres, CNC lathes, etc. (no additional installations required)
✅ The spindle of the machine does not need to be rotated.

➡️ More information: http://ow.ly/Krkr50HWkOM

⭕️ For technical information, catalogs and quotations⤵️
📧 E-mail: [email protected]
☎️ Tel: +39 051 735744

03/04/2026

⭐️Best wishes for an Easter full of vitality and positivity.
Happy Easter from the entire Yamato team!
www.yamatoroll.eu

Indirizzo

Via Degli Andreani 9
Sasso Marconi
40037

Orario di apertura

Lunedì	08:00 - 17:00
Martedì	08:00 - 17:00
Mercoledì	08:00 - 17:00
Giovedì	08:00 - 17:00
Venerdì	08:00 - 17:00

Telefono

+39051735744

Sito Web

https://www.yamatoroll.eu/

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando Yamato Roll Eu pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.