Schiavo

28/07/2026

Ci prendiamo una pausa! Siamo chiusi per ferie dal 31 Luglio al 25 Agosto inclusi. Riprendiamo il 26 Agosto

21/07/2026

Vertical glass washing machine model PLUS1600.6 just delivered and installed in France. Washing machine with 6 brushes connected in line with a straing edging machine. Open top machine, independent pre-wash section with water tank and pump and energy saving system. The PLUS model is a cutting edge machine for washing flat glass. A big thank you to Rudy Marcantonio, Silvia Gentilini and all CVMI FRANCE team and of course a big thank you to the customer for choosing Schiavo as partner in business!

14/07/2026

Non sempre è necessario avere un vetro molato e lucidato. Per molte applicazioni la sfilettatura è una lavorazione sufficiente.
La nostra sfilettatrice StarBelt Twin con doppio nastro incrociato è una macchina semplice e funzionale. Ti permette di sfilettare velocemente vetri di diversi spessore per la produzione di vetrocamera e tempera o per lavorazioni successive.
Il macchinario può essere dotato dei seguenti optional:
- regolazione velocità dei nastri regolabile tramite inveter
- Tavolo a rotelle 3000x1500 mm per supporto grandi formati di vetro
- Cambio rapido dei nastri e tensionamento tramite cilindri pneumatici
- Aspiratore per molatura a secco
- Vasca di riciclo per molatura con acqua

08/07/2026

Schiavo è lieta di annunciare la partecipazione alla fiera Glasstec in Germania dal 20 al 23 ottobre 2026.
Glasstec è la più importante fiera del settore del vetro e mostreremo le ultime novità sviluppate. Mostreremo diversi macchinari tra cui la fresatrice verticale FV1000, lavatrice verticale PLUS2000.6, ventose e manipolatori per il sollevamento del vetro.
Vi aspettimo al padiglione 15 stand F27

23/06/2026

Classificatore per vetro a movimentazione laterale, modello CLO3300S. Movimento motorizzato controllato da inverter per una movimentazione fluida e senza oscillazioni. Cassetti per lo stoccaggio di pacchi completi di vetro, lastre singole o ritagli di vetro. Capacità per cassetto: 3000 Kg. Questa soluzione consente di risparmiare fino al 40% di spazio rispetto ai cavalletti singoli e migliora l’organizzazione della vostra azienda

17/06/2026

Another PLUS2000.6 vertical glass washing machine is about to leave our factory and be shipped to the customer.
The PLUS model is made entirely of stainless steel and can handle glass up to 20 mm thick. The brush motors and glass-movement motors are all located on top of the machine. The pre-wash, wash, and rinse sections are independent, each with its own water tank and pump.
If you work with glass and are looking for a machine that will last 30 years, Schiavo has the right machine for you.

10/06/2026

Horizontal glass washing machine HTL1600.6.4. Machine made entirely of stainless steel. N° 6 brushes for low-e glass. High-efficiency blower. Energy saving system.
Schiavo has been designing and manufacturing machinery in Italy for over 40 years. High-quality machines built to last

26/05/2026

Machine down? Spare part ships within 24 hours.
An unplanned downtime has a precise cost: every hour of stop means lost production, delayed deliveries, and unhappy customers.
We don't make you wait.
With Schiavo's spare parts service:

✅ Order received → shipped within 24 hours
✅ Spare parts warehouse always stocked
✅ Automatic warehouse
✅ Fast and efficient response

After-sales support is not an add-on service — it's the most important part of what we do. With Schiavo, you don't just have a machine supplier, you have a partner for your business.

19/05/2026

Do you need a working center to make large notches in glass?

Not always. The FV1000 is a compact drill and milling machine (it occupies a space of just 5.6 x 1.5 m), fast and precise. The end result is a perfect notch, fully ground and with no imperfections between the machining of two notches. Programming is simple, and the operator can focus on other tasks while the FV1000 works for you. An affordable investment that pays for itself in no time.

vidrio vidro glassprocessing glassindustry glassmachines glasstechnology glassmanufacturing glassfactory madeinitaly drilling milling glassdrilling glassmilling

19/05/2026

Do you need a working center to make large notches in glass?

Not always. The FV1000 is a compact drill and milling machine (it occupies a space of just 5.6 x 1.5 m), fast and precise. The end result is a perfect notch, fully ground and with no imperfections between the machining of two notches. Programming is simple, and the operator can focus on other tasks while the FV1000 works for you. An affordable investment that pays for itself in no time.

https://youtu.be/94SEKBH3xQE?si=i7EsFroY1u4MMzzQ

Production of glass door with a big internal notch using the drilli...