Quali sono gli orari di apertura?

Lunedì 08:00 - 12:30 13:30 - 17:00 Martedì 08:00 - 12:30 13:30 - 17:00 Mercoledì 08:00 - 12:30 13:30 - 17:00 Giovedì 08:00 - 12:30 13:30 - 17:00 Venerdì 08:00 - 12:30 13:30 - 17:00

G.COMM Srl

Casa
Italia
Cornate d'Adda
G.COMM Srl

quality lighting solution for dental/medical professionals, made in Italy.

08/09/2026

Every dental practice has different needs, but certain aspects remain essential in all clinical activities:

- visibility of the operating field;
- ergonomics;
- safety and procedural control.

For this reason, G.COMM develops solutions designed to support dentists in their daily work: from the Nuvolina Composafe, Polaris Composafe and Zero4 Compact operating light systems to 4K clinical documentation with Iris View; from training-focused configurations with Imparo dental simultor to dental unit waterline sanitation with R45.

Different technologies, designed with one shared goal: to make chairside work more precise, efficient and safe.

Swipe through the carousel and discover G.COMM solutions.

11/08/2026

0.1 microns.

This is the microfiltration rating of the Easy Pure membrane, an anti-Legionella filter developed to help control the water supplied to dental units.

Narrow tubing, water stagnation and intermittent flow can create conditions that promote microbiological contamination and biofilm formation within dental unit waterlines.

For this reason, water management does not concern only what is delivered through the instruments, but the entire route the water follows inside the dental unit.

Easy Pure works through a microfiltration membrane, adding a physical barrier to the water supply system before delivery.

Key features:

• 0.1-micron microfiltration membrane
• suitable for installation on all dental units
• approximate capacity of 5,000 litres
• replacement required at least once a year
• system consisting of a pre-filter, an anti-Legionella filter and a connector with seals

A simple device with a specific purpose: adding an additional level of protection to the daily management of dental unit water.

Because microbiological control does not depend on a single measure, but on the integration of waterline treatment, maintenance and physical filtration barriers.

06/08/2026

In a previous post, we highlighted an important finding: according to a meta-analysis published in BMC Oral Health, 77% of the samples analysed from dental unit waterlines exceeded the bacterial limits recommended by the CDC.

This finding shows that dental unit water management is not a secondary concern, but an integral part of microbiological control within the dental practice.

Narrow tubing, low flow rates and periods of stagnation can promote the formation of biofilm on the internal surfaces of the water circuits, making a specific and consistent sanitation protocol essential.

R45 was developed for the treatment of dental unit waterlines, acting precisely where daily control is most difficult: inside the water circuits.

Key features:

• Class IIb medical device
• Certified bactericidal, mycobactericidal, fungicidal and virucidal activity
• Free-radical mechanism of action for effective biofilm removal
• Sterilises, breaks down and cleans in a single 60-second treatment

The microbiological quality of dental unit water depends not only on the water delivered at the outlet, but also on the consistent management of the entire water circuit.

25/07/2026

Before reaching a dental practice, every device goes through multiple stages of processing, assembly and quality control.

Each step is different.

Some require technical precision.
Others rely on manual skills and experience.
Some take only a few minutes, yet directly affect the final result.

With this content, we take you inside G.COMM’s production process, where every component is manufactured, inspected and assembled before becoming part of a complete device.

This is also how our Made in Italy quality takes shape: not only in the finished product, but in the care and attention dedicated to every stage of the process.

Because quality does not begin with the final inspection.

It is built long before that, one detail at a time.

16/07/2026

Before illuminating the operating field in a dental practice, a light must pass a fundamental inspection: the assessment of its illumination performance.

In the case of Polaris, this does not simply mean checking that the light switches on or that its output is sufficiently powerful.

The quality of illumination depends on something far more precise: the way the light beams converge, overlap and create a uniform working field.

During this stage, particular attention is paid to how the light performs:

* The beam must be correctly centred;
* Light distribution must be consistent;
* The light sources must work together;
* Shadows must be minimised;
* The illuminated field must meet the professional’s expectations during daily use.

Because a dental operating light must provide visibility, working comfort and precise control over every detail.

It represents the connection between what the device promises and the performance it delivers in the clinical field.

This inspection takes place before the light leaves production, when Polaris is no longer assessed as a collection of individual components, but as a complete optical system.

This is where every LED, every reflection and every geometric element must contribute to the same result: stable, uniform and functional illumination.

01/07/2026

Tecnologie certificate e agevolazioni fiscali: un tema da conoscere da vicino.

Con l’Iperammortamento 2026-2028, l’investimento in beni strumentali certificati può aprire nuove opportunità anche per studi odontoiatrici e distributori.

Ne parleremo nel webinar gratuito del 2 luglio 2026 alle ore 13:00, insieme a Innova, esperti in agevolazioni fiscali.

Durante l’incontro approfondiremo:

– chi può accedere all’agevolazione
– quali requisiti tecnici sono richiesti
– come funziona la maggiorazione fiscale
– il caso concreto di Iris View, bene certificato che consente di accedere a una maggiorazione fino al 180%, con un risparmio d’imposta fino al 43,2% sull’investimento

Un appuntamento pensato per fare chiarezza e valutare con maggiore consapevolezza le possibilità legate agli investimenti in tecnologie certificate.

Per informazioni e iscrizioni:
📞 +39 331 643 8727
📩 [email protected]

26/06/2026

Con il ritorno dell’Iperammortamento 2026-2028, l’acquisto di beni strumentali certificati può rappresentare un’opportunità importante anche per il settore odontoiatrico.

Nel webinar gratuito del 2 luglio 2026 alle ore 13:00, approfondiremo il tema insieme a , esperti in agevolazioni fiscali e Iperammortamento.

Parleremo di:

– chi può accedere all’agevolazione;
– come funziona il meccanismo di maggiorazione fiscale;
– quali requisiti tecnici sono richiesti;
– un caso concreto: Iris View, bene certificato che consente di accedere alla maggiorazione fiscale fino al 180%, con un risparmio d’imposta fino al 43,2% sull’investimento.

Un appuntamento pensato per aiutare distributori e professionisti del settore a comprendere meglio le opportunità legate agli investimenti in tecnologie certificate.

Per riservare il proprio posto:
📩 [email protected]

24/06/2026

Before a component is assembled, painted or integrated into a device, there is a stage that often remains invisible, yet has a direct impact on final quality: sanding.

Arms, heads, casings, handles and structural components are worked individually to even out surfaces, correct any irregularities and prepare each part for the next stages of production.

It is not simply about making a component look cleaner. A well-finished surface helps parts fit together more precisely, supports the continuity of subsequent processes and contributes to the overall accuracy of the finished product.

That is why every piece is followed and checked by a dedicated team. If the result meets G.COMM’s production standards, it moves forward in the process; if imperfections are found, the component is reworked starting from the sanding stage.

For us, Made in Italy means this: quality not as a final inspection, but as a responsibility that runs through every stage of production. A form of craftsmanship that lives even in the steps that often remain unseen.

16/06/2026

Biofilm and microbiological contamination cannot be eliminated simply by ‘flushing the waterlines’.

Dental unit waterlines are complex environments:
microcircuits, water stagnation, aerosols and daily use require consistent management protocols.

One of the most critical issues is biofilm: a biological structure that adheres to the inner surfaces of the waterlines and can protect microorganisms and contaminants.

For this reason, sanitisation must be specifically designed for this environment.

R45 is a broad-spectrum sterilising agent and certified medical device, formulated to:
– clean and sanitise in a single treatment
– break down biofilm
– eliminate viruses and bacteria
– preserve dental unit materials

Water management is an integral part of a dental practice’s operational safety.

11/06/2026

The CDC highlights that dental unit waterlines are particularly prone to biofilm formation due to narrow tubing, low flow rates, and frequent periods of water stagnation.

According to a meta-analysis published in BMC Oral Health, bacterial contamination in dental unit waterlines exceeded the limits recommended by the CDC in 77% of the samples analyzed.

And this is precisely one of the most challenging aspects of waterline management: the problem can continue to develop even when everything appears to be functioning properly.

This is because biofilm does not immediately affect daily operations in a visible way. It forms gradually within systems that are part of the normal day-to-day functioning of a dental practice.

That is why water management is not only about what happens during treatment.

Indirizzo

Via XXV Aprile, 20
Cornate D'Adda
20884

Orario di apertura

Lunedì	08:00 - 12:30
	13:30 - 17:00
Martedì	08:00 - 12:30
	13:30 - 17:00
Mercoledì	08:00 - 12:30
	13:30 - 17:00
Giovedì	08:00 - 12:30
	13:30 - 17:00
Venerdì	08:00 - 12:30
	13:30 - 17:00

Sito Web

http://www.gcomm-online.com/

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando G.COMM Srl pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.