Quali sono gli orari di apertura?

Lunedì 08:30 - 17:30 Martedì 08:30 - 17:30 Mercoledì 08:30 - 17:30 Giovedì 08:30 - 17:30 Venerdì 08:30 - 17:30

SIC Sistemi Integrati Condizionamento

Home
Italia
Cologna Veneta, Veneto
SIC Sistemi Integrati Condizionamento

SIC (Sistemi Integrati Condizionamento) designs, produces and sells systems and equipments for cooli

SIC (Sistemi Integrati Condizionamento) designs, produces and sells systems and equipments for cooling, heating and treating air,
and offers a wide range of solutions for residential applications (home), commercial applications
(shops, hotels, bars, and offices) and industrial applications. Thanks to a professional, dynamic and expert team, SIC has succeeded in just a few years in establishing consolidated commercial partnerships with leading international manufacturers. Today SIC represents an essential point of reference for anybody choosing or installing air conditioning and treatment systems. Our constant use of advanced technology has always been inspired by the demand for more rational and sustainable energy usage, which is also the force driving and steering evolution in SIC. SIC’s heat recovery systems and heat pumps, for example, are conceived and designed to use energy in the most rational way possible.

24/07/2024

🕶🍹 We inform you that the company will be closed for holidays from 08th to 28th August 2024, activities will resume regularly on Thursday 29th.
We take this opportunity to wish you happy holidays!
For any emergency, please contact [email protected]

12/07/2024

🌬️ Heat recovery units without ducting.
For a healthy environment and with the necessary air exchanges, in many situations is not possible to install a mechanical ventilation system with heat recovery; it requires the creation of air ducts that are sometimes difficult to implement and, in any case, aesthetically not accepted by customers. For these situations, SIC offers the ReVent series of high-efficiency heat recovery units.

• ReVent SPT - Wall-mounted single-pipe, high-capacity heat recovery unit
• Revent Wall - Wall-mounted recuperator with flow rate up to 150m3/h and HEPA filter
• Revent RDS - Wall or ceiling recuperator in 2 sizes of 500 and 800mc/h of air flow.

Compact and reliable, they can be installed quickly and DO NOT require condensate drain line!
For homes, offices, shops, they solve all air exchange exigence and heat recovery situations according to current rules and with minimal installation discomfort (all you need is holes in the wall and an electrical connection). Save energy! Very low consumption and high efficiency. This is the standard of SIC products also on the decentralized systems line.
Certified air sanitization with the Bioxigen system is also present on this product line.

💡 https://www.sicsistemi.com/it/prodotti/1/ventilazione-residenziale

27/06/2024

Ensuring safe, salubrious living and working environments in all seasons with the best technologies: this is the aim also of our ventilation units FB Series FBS (silenced type), FBE (low-profile compact type).

Features:
✅ Galvanised, stainless steel or Aluzink structure, with perforated internal counter panels
✅ Steel connections to air intakes
✅ Centrifugal fans direct driven and mounted on anti-vibration supports
✅ Easy installation, operation and maintenance

All these characteristics make our units FBS, and FBE the solution for all types of installations; they ensure the correct air flow in various conditions of pressure drop. The air flow rate goes from 50 to 48.000 mc/h.

All units are combined with a specific range of accessories for ducting and regulation, including the NEW PCUS control panel, air-purifying filters, flanges and plenum suitable for all types of installation, and Bioxigen System for sanitising the air from viruses and bacteria.

💡 Write us for more information: [email protected]

13/06/2024

🔵 UHP - UHP DX & UTF - UTF DX - SIC Air Terminal Units: a solution for air treatment in any plant.

🔴The UHP series consists of 5 sizes from 800 m3/h to 5000 m3/h, with static pressures up to 380 Pa

⭕️Double panel galvanized sheet metal thickness 15 mm with polyurethane foam insulation

⭕️Heat exchange coil made with copper pipes and aluminum fins and AISI 304 stainless steel condensate collection tray

⭕️Three speed centrifugal electric fans or EC brushless alternative on UHPE series

⭕️The configuration is only horizontal with 3 or 6 row water coil, ISO 16890 ePM10 50% (G4 EN 779) filter in suction and 3-speed electric fan

⭕️ optional additional compact type filter th. 48 mm in efficiency class ePM1 75% (F7 EN 779)

⭕️ Water coil and direct expansion coil for R410A and R32

🔴The UTF series consists of eight models, exclusively in the horizontal version, to cover an air flow range from 600 to 27,000 m3/h

⭕️Frame in extruded aluminum profile with joints in preloaded nylon, sandwich type panels th. 23 mm (optional 48 or 60 mm), in galvanized sheet metal internally and pre-painted externally with polyurethane insulation density 45 kg/m3 panels

⭕️Synthetic filters in efficiency class ISO 16890 ePM10 50% on the inlet; optional additional filters in efficiency class ePM1 70% or ePM1 90%

⭕️Centrifugal fans with free impeller with backward blades, directly coupled to an EC electric motor; rotation speed control electronics already integrated in the motor

⭕️Copper and aluminum heat exchange coil with 2, 4 or 6 rows also available for direct expansion systems with special AHU management kit for any VRF system

⭕️ Water coil and direct expansion coil for R410A and R32

‼ SIC is the only company which gives you a mechanical ventilation system with an integrated air sanitization device.

Bioxigen sanitizes the air and the surfaces. It can be installed inside other equipment in order to reduce microbes and purify the air.

💡 For more information visit our website

⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇

https://www.sicsistemi.com/gb/prodotti/4/trattamento-aria

28/05/2024

𝗖𝗙𝗥-𝗛𝗣𝗦: Heat recovery units combined to heat pump system

🎛 Complete built-in advanced electronic control

⭕️ Nominal air flow rate from 5000 to 13500 mc/h

⭕️ Heat pump mode with low external temperature without preheating

⭕️ Unit with EC fans

⭕️ Constant air flow

⭕️ Low temperature limit function

⭕️ Inverter technology

⭕️ For floor or roof installation

Units are designed to meet both air renewal and heat&humidity comfort, request by typically industrial and civil environments; this by limiting as much as possible the use of primary energy. The unit include an heating pump circuit, a static heat recovery system composed of a crossflow air-to-air heat exchanger, low consumption EC direct driven fans with electronic control and long-life filters for lower air pressure drop and high air quality level.

👁‍🗨 We can offer an integrated air sanitization device: is the system for sanitising air and surfaces and it can be used inside other units for purification and microbial reduction. Activating oxygen molecules, it produces negative ions that neutralize smells and bacteria, in the air and on surfaces. The filters stop impurities and pollutants, SIC Bioxigen removes them ❌

💡 Write us for more information: [email protected]

10/05/2024

CFR-HPE/HPEI: Heat recovery units combined to heat pump system

◾ NEW software release 2024

◾ Installation indoor or outdoor

◾ Global COP >8

◾ HP mode with very low external temperature without pre-heating

◾ Wide air flow range and power modulation on HPI version

◾ Fixed point air supply temperature control on HPI version

Series of 7 models and sizes from 350 to 5000 mc/h for ceiling installation, composed of:

✅ Air-to-air crossflow aluminium heat recovery.

✅ Air-to-air heat pump system (R410A) composed of electric driven on-off compressor, or variable speed DC inverter compressor on CFR-HPEI, evaporating and condensing reversible copper-aluminium finned coils, electronic expansion valve.

✅ Full-range controlled direct driven double inlet centrifugal fans.

✅ Low consumption EC technology motors on CFR-HPE / HPEI and constant flow regulation mode for 100-450 models

✅ Built-in electric box complete with electronics and control panel.

👁‍🗨 We can offer an integrated air sanitization device: is the system for sanitising air and surfaces and it can be used inside other units for purification and microbial reduction. Activating oxygen molecules, it produces negative ions that neutralize smells and bacteria, in the air and on surfaces. The filters stop impurities and pollutants, SIC Bioxigen removes them ❌

💡 Write us for more information: [email protected]

29/04/2024

ReVent-RDS high efficiency heat recovery unit , compactness, quite operation and simple installation, they do not require ducting and are designed for installation in school buildings, offices, small and medium-sized commercial businesses.
ReVent-RDS can be installed vertically or horizontally close to the perimetral wall of the building and it can be integrated with existing heating and air conditioning systems.

Main technical skills:
• Airflow 500 or 800 mc/h
• Noise 37dB(A)
•Self-supporting structure made of painted panels with high thermo-acoustic insulation with polyester fibers and damping masses
• Filters ePM1 70% (F7 EN 779) in external air intake and ePM10 50% (G4 EN 779) in expulsion
•Simple maintenance and cleaning, High efficiency static recuperator in polystyrene, complete with automatic by-pass, Polyamide fans for high silence and EC brushless electronic motor, electronic control with LCD display and APP for management via Wi-Fi
• Optional: adjustable delivery vents, condensate drainage in the air, outdoor pipe and grill kit, Modbus connection, electric post-heating resistor, Bioxigen sanitisation, etc.

💡 Write us for more information: [email protected]

15/04/2024

🔵 ReVent SPT - Wall mounted energy recovery ventilators
Easy to install, ReVent SPT is a high efficency heat recovery.

It's able to solve humidity and air exchange problems in a simple and cheaper way, maintaining the thermo-acoustic insulation of the wall.

Technical features

⭕️ Reversible axial fan with EC motor. Due to the applied EC technology
the fan is featured with low power consumption and silent operation. The
fan motor has integrated thermal overheating protection and ball bearings
for long service
⭕️ Filter ISO 16890 ePM10 55% filter in polypropylene with low air pressure
drop
⭕️ High-tech ceramic energy accumulator with regeneration efficiency
up to 97%
⭕️ The ceramic regenerator is treated with a composition which prevents bacteria growth
⭕️ Two integrated air filters with total filtration rate G3 with antibacterial treatment
⭕️ Automatic shutter for to avoid cool/hot air came in when unit is OFF. As
same time insects or dust remain outside
⭕️ External cap protect the duct from rain and the grid avoid the presence
of bird nest.

💡 For more information write a comment and leave a like 💡

27/03/2024

🔵 ReVent Wall & OxyVent Wall - Wall mounted energy recovery ventilators
Wall mounted energy recovery for air exchange and air purification

This product consists of supply fan, exhaust fan, heat exchanger, main filter, activated carbon filter, HEPA filters and sanitization by ionizer.
Quick and easy installation allows the product to be mounted and switched on in less than one hour, with the possibility to position the air flow on the back or on the side of product.
The unit controls the CO2 level in the room and it is equipped as standard with Remote Control.

⭕️ Innovative 3-layer filtration
⭕️ High efficiency DC fans
⭕️ Compact & ultralight

‼ SIC is the only company which gives you a mechanical ventilation system with an integrated air sanitization device.
Bioxigen sanitizes the air and the surfaces. It can be installed inside other equipment in order to reduce microbes and purify the air.

💡 For more information visit our website
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
https://www.sicsistemi.com/it/prodotto/298/revent-wall

04/03/2024

🌬️ For air treatment expert only!

In the range of units for mechanical ventilation and heat recovery presents in the catalogue, SIC offers units with ROTARY ENTHALPIC heat recovery system, available for small and large air flow rates.
The SIC Rotary Enthalpic Recovery Unit allows you to carry out exhaust air exchange in the desired quantities, recovering most of the thermal energy inside expelled air and also the latent heat linked to the humidity present in the same air.
In this way, not only sensible heat recovery is optimized, but also the humidity level of the air in the environment (important for a good internal atmosphere) is safeguarded. Thermoregulation specialists prefer this type of air handling and heat recovery unit.
The SIC units are designed to eliminate the problem of partial recirculation due to stale air leakage, thanks to the special design of air circuit and positioning of the fans.
In the SIC range of Enthalpic Rotary Recuperators are available:

• ReVent BRH with air flow rates from 150 to 750 m3/h
• CFR HE/HEE with air flow rates from 300 to 3800 m3/h
• CFR HERR with air flow rates from 1500 to 15,000 m3/h
It is impossible not to find the right solution to specific needs from true air treatment experts.

💡 https://www.sicsistemi.com/

Indirizzo

Viale Dell'industria 25
Cologna Veneta
37044

Orario di apertura

Lunedì	08:30 - 17:30
Martedì	08:30 - 17:30
Mercoledì	08:30 - 17:30
Giovedì	08:30 - 17:30
Venerdì	08:30 - 17:30

Sito Web

http://www.sicsistemi.com/

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando SIC Sistemi Integrati Condizionamento pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.