1960 Seravesi

01/10/2025

Ecco la nuova a 6 metri ad assi variabili realizzata per la ditta Sidertaglio Calandratura S.r.l.. Si tratta di una calandra a 6 metri, geometria variabile, con una forza di di 350 Ton, un rullo superiore standard per calandrare diametri che partono dai 28" ed un secondo rullo intercambiabile ridotto per avere la possibilità di calandrare diametri a partire dai 22"; i rulli inferiori sono supportati nella mezzeria; per garantire un perfetto trascinamento, la macchina è dotata di tutti e tre i rulli motorizzati e di un supporto centrale con apertura idraulica, per la calandratura di grandi diametri. Vogliamo ringraziare la Sidertaglio Calandratura S.r.l., per aver scelto la nostra azienda per la calandra della loro nuova business unit.

03/09/2025

Happy to share pictures of our last installation in Canada. STATS GROUP contacted us few years ago to explore the possibility of bringing they rolling job in house, after some technical discussion and meeting with their staff, we found the right configuration for the right that would satisfy their need.
The E79 2251-S variable geometry plate roll fully installed and, as always, with thumbs up.
Here at 1960 Seravesi we don't sell what we have in the catalogue, here we look for the right for our customers and with them we agree on the right machine for their
The machine has the following :
Rolls width 2200 mm (87")
Top roll: 440 mm (17.3")
Max bending power: 420 Ton
Pre bending thickness: 32 mm (1-1/4")
Considering pipe ID: 508 mm (20")
Material 360 Mpa (52Ksi)

The machine is equipped with an interchangeable top roll, diameter 350 mm (13.7"), able to roll pipes with a diameter from 402 mm (15.8")

“The bitterness of poor quality remains long after the sweetness of low price is forgotten.” - Benjamin Franklin

05/08/2025

Before a short brake for our summer vacation, we would like to show you our last installation, this time in . This is a variable geometry model E79 3185, with the following :
-Top roll of 32"
-Bending power of 1400 Ton
-Plate width 10'
-Max Pre bending capacity 4"

Antes de un breve descanso para nuestras vacaciones de verano, nos gustaría mostrarles nuestra última , esta vez en . Esta es una de geometría variable modelo E79 3185, con estas :
-Rodillo superior de 32"
-Potencia de plegado 1400 toneladas
-Anchura de chapa 10'
-Capacidad máxima de pre-curvado 4"

30/07/2025

29/07/2025

We are to share our latest installation in with you.
At the beginning of the year, Millerbernd chose to buy a new from us, a plate roll, whose purpose was the of large thickness and small diameter pipes. Last week the machine was installed and the customer wanted to immediately test the machine with the for which the machine was purchased, thickness 1.5", internal diameter 19, width 61", material with 52 Ksi.
The photographs speak for themselves. We wanted to thank Millerbernd once again for the trust he has placed in us

Estamos orgullosos de compartir con ustedes nuestra última instalación en América del Norte.
A principios de año, Millerbernd optó por comprar una nueva de nosotros, una roladora, cuyo propósito era el de tuberías de gran espesor y diámetro pequeño. La semana pasada se instaló la y el cliente quería probar inmediatamente la máquina con el para el que se compró la máquina, espesor 1,5", diámetro interno 19", ancho 61", material con 52 Ksi.
Las fotografías hablan por sí mismas. Queríamos agradecer a Millerbernd una vez más la confianza que ha depositado en nosotros

21/07/2025

Monday
We are deliverying to our new in , his new E79 3155 variable geometry .


Lunes de envío
Estamos entregando a nuestro nuevo de EE.UU., su nueva de placa de geometría variable E79 3155.