LI-BE Srl

LI-BE Srl LI-BE | Bearing Manufacturer
Tailored solutions for Steel & Machine Tool Industry
🇮🇹 Made in Italy since 1984
🛠️ Design Simulation Production

In back-up rolls, the outer ring is also the surface working in contact with the mill roll.That is why we do not assess ...
17/06/2026

In back-up rolls, the outer ring is also the surface working in contact with the mill roll.

That is why we do not assess the component as an isolated bearing, but as a system under real load: external contact, ring compliance, speed, lubrication and sealing.

Dedicated test benches allow us to combine application experience, simulation and physical data.

Here are some back-up rolls just out of our test bench.We test and run them in real operating conditions, including high...
10/06/2026

Here are some back-up rolls just out of our test bench.

We test and run them in real operating conditions, including high speeds and heavy loads, to validate sealing systems as well and reduce the risk of strip contamination.

Can you tell what the lines on the outer rings are?

03/06/2026

A single bearing failure can halt your rolling line. At LI-BE, we use a dynamic FEM analysis to simulate real roller forces on the back-up roll, identifying potential plasticization before it causes problems.
Need custom solutions for the steel industry? Let’s talk.

Big loads, focused stress.In large-diameter shafts, fatigue resistance matters more than brute strength. At LI-BE, we de...
27/05/2026

Big loads, focused stress.
In large-diameter shafts, fatigue resistance matters more than brute strength. At LI-BE, we design each shaft as a structural element, built to handle real operating conditions, not just theory.

Sub-micron tolerances. Combined loads. Real simulations.SEL bearings are designed for machine tools where precision isn’...
20/05/2026

Sub-micron tolerances. Combined loads. Real simulations.

SEL bearings are designed for machine tools where precision isn’t optional. At LI-BE, we simulate real operating conditions to ensure every contact zone performs as expected under preload, under stress, under control.

The LI-BE SEL/Y series is designed for positioning systems that require micron-level precision, zero play and high rigid...
13/05/2026

The LI-BE SEL/Y series is designed for positioning systems that require micron-level precision, zero play and high rigidity.

In the MK2 version, lower heat generation ensures more stable operation and extremely low thermal drift.
Available with bore diameters from 50 mm to 850 mm, with customised interfaces and fastening systems on request.

06/05/2026

Vacuum, pressure, or harsh environments, a seal that fails is a bearing that won’t last. With FEM simulations, we verify deformation and stress during assembly, ensuring reliable sealing performance even in the most critical applications.

For motion-support challenges, value comes from keeping analysis, product and support together. LI-BE follows the full p...
29/04/2026

For motion-support challenges, value comes from keeping analysis, product and support together.
LI-BE follows the full path: understanding the requirement, defining the solution, producing in-house and providing technical support when needed.
A single point of contact, a more straightforward process, and a solution built around the real application.

Manufacturing in Italy means keeping expertise, process control and accountability close to the project.With additive ma...
22/04/2026

Manufacturing in Italy means keeping expertise, process control and accountability close to the project.

With additive manufacturing, LI-BE develops custom polymer components in-house, from bearing cages to sealing elements, using materials that can also be reinforced with glass or carbon fibre.

More design freedom, faster response times and better cost control, while keeping production in Italy.

In our grinding department, 22 machines handle internal diameters, external diameters and faces, with machinable diamete...
15/04/2026

In our grinding department, 22 machines handle internal diameters, external diameters and faces, with machinable diameters from 20 mm to 1250 mm.

This allows LI-BE to keep a wide range of final machining stages in-house, with control and consistency where accuracy is essential.

Indirizzo

S. S. 10 Località Fabbrica 46
Arena Po
27040

Orario di apertura

Lunedì 09:00 - 17:30
Martedì 09:00 - 17:30
Mercoledì 09:00 - 17:30
Giovedì 09:00 - 17:30
Venerdì 09:00 - 17:30

Sito Web

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando LI-BE Srl pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.

Scelte rapide

Condividi

Digitare