Natraj Pipes - PVC & HDPE

Call Directions Website Contact the business

Natraj Pipes - PVC & HDPE Manufacturer of uPVC ,SWR, Casing, Agri and HDPE Pipes

A rooftop solar water heating system pushes water temperatures well above what standard UPVC is rated for. It also creat...
01/10/2026

A rooftop solar water heating system pushes water temperatures well above what standard UPVC is rated for. It also creates pressure spikes as the system heats and cools through the day. The pipe material and its pressure class has to be specified for those exact conditions. CPVC is the starting point. The application decides the rest.

30/09/2026

Over-pressurised pipes do not always fail immediately. They show signs first, if you know what to look for. Catching pressure damage early prevents a small problem from becoming a pipe burst on a pressurised system.

30/09/2026
When a pipe loses its circular form during storage or handling, the fitting socket cannot seat correctly. That gap,even ...
29/09/2026

When a pipe loses its circular form during storage or handling, the fitting socket cannot seat correctly. That gap,even a fraction of a millimetre, is where pressure finds its way out. Roundness is a basic quality check. Make it part of your delivery acceptance.

Pipe and fitting tolerances are designed to work together. When they come from different manufacturers, socket depth, bo...
28/09/2026

Pipe and fitting tolerances are designed to work together. When they come from different manufacturers, socket depth, bore diameter, and wall thickness can vary just enough to compromise the joint. Same source is not just convenience! It is quality control.

27/09/2026

PLB duct coils are not supplied in standard lengths as a default. The coil length is determined by the route distance between access points on the network plan. Fewer underground joints mean fewer points where the network can fail. The length comes from the laying plan and not from stock.

26/09/2026

Without a pre-lubricated bore, cable friction in long underground duct runs increases pull tension to the point where fibre can be damaged during installation. The PLB bore solves that.

A dry pressure test on a new pipe run checks every joint and fitting for integrity before water enters the system. Skipp...
24/09/2026

A dry pressure test on a new pipe run checks every joint and fitting for integrity before water enters the system. Skipping it means leaks show up after walls are closed or flooring is laid. Test dry. Confirm the system holds. Then introduce water.

22/09/2026

HDPE pipes bend without cracking because of how the material is structured at the molecular level. That flexibility lets it handle ground movement, uneven terrain, and installation bends without compromising pressure rating or joint integrity.

May Lord Ganesha bless every new beginning with wisdom, peace and prosperity.On this auspicious occasion of Ganesh Chatu...
14/09/2026

May Lord Ganesha bless every new beginning with wisdom, peace and prosperity.

On this auspicious occasion of Ganesh Chaturthi, Natraj Pipes wishes you and your family happiness, harmony and success.










Address

33 A Jawahar Lal Nehru Road
Kolkata
700071

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+919830081676

Alerts

Be the first to know and let us send you an email when Natraj Pipes - PVC & HDPE posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Natraj Pipes - PVC & HDPE:

Shortcuts

Share