Config Structures

Config Structures 𝗔𝘂𝘁𝗵𝗼𝗿𝗶𝘇𝗲𝗱 𝗱𝗲𝗮𝗹𝗲𝗿 𝗮𝗻𝗱 𝘀𝘂𝗽𝗽𝗹𝗶𝗲𝗿𝘀 𝗼𝗳
𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗔𝗡𝗖𝗛𝗢𝗥 𝗙𝗔𝗦𝗧𝗘𝗡𝗘𝗥𝗦

The high-quality 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗮𝗰𝗿𝘆𝗹𝗶𝗰 𝘀𝗲𝗮𝗹𝗮𝗻𝘁 𝗠𝘂𝗹𝘁𝗶 𝗔𝗖 can be used on cracks, joints, and connection joints in internal areas...
07/06/2025

The high-quality 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗮𝗰𝗿𝘆𝗹𝗶𝗰 𝘀𝗲𝗮𝗹𝗮𝗻𝘁 𝗠𝘂𝗹𝘁𝗶 𝗔𝗖 can be used on cracks, joints, and connection joints in internal areas. Allows for easy application and smoothing, and ensures efficient work. Strong adhesion to absorbent substrates, can be painted and plastered over, has a neutral odour meaning it is ideal for processing even in confined spaces.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗽𝗲𝗿𝗶𝗺𝗲𝘁𝗲𝗿 𝗮𝗱𝗵𝗲𝘀𝗶𝘃𝗲 𝗳𝗼𝗮𝗺 was specially developed for bonding expanded polystyrene panels for perimeter insula...
06/06/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗽𝗲𝗿𝗶𝗺𝗲𝘁𝗲𝗿 𝗮𝗱𝗵𝗲𝘀𝗶𝘃𝗲 𝗳𝗼𝗮𝗺 was specially developed for bonding expanded polystyrene panels for perimeter insulation on the basis of DIN 4108-2. Particularly on cold bitumen sheeting and bitumen coatings, the foam has an especially high adhesion rating. The very low level of post-expansion avoids the formation of cavities and guarantees a long-lasting insulation. It can bond around 13 m² of wall, which makes the FISCHER perimeter adhesive foam particularly cost-effective. Further application areas are the glueing of insulation elements and the filling of cavities. The very low level of post-expansion prevents the formation of cavities and guarantees a reliable bond. Protective gloves for end users are included.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗣𝗨 𝗱𝗼𝘀𝗶𝗻𝗴 𝗴𝘂𝗻𝘀 are optimally tailored to the FISCHER gun foams and offer the ideal dispenser for each applic...
02/06/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗣𝗨 𝗱𝗼𝘀𝗶𝗻𝗴 𝗴𝘂𝗻𝘀 are optimally tailored to the FISCHER gun foams and offer the ideal dispenser for each application.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗴𝘂𝗻 𝗳𝗼𝗮𝗺 is suitable for the filling, insulation and isolation of window connection joints and for the filli...
31/05/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗴𝘂𝗻 𝗳𝗼𝗮𝗺 is suitable for the filling, insulation and isolation of window connection joints and for the filling of door frame connection joints. The gun foam with high joint sound and thermal insulation expands only slightly during. This avoids the need for rework, thus ensuring easy and time-saving application for professionals. The beige FISCHER gun foam is fitted with an improved standard valve that extends the product's shelf life. Protective gloves for end users are included.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗿𝗲𝗻𝗱𝗲𝗿 𝗳𝗶𝘅𝗶𝗻𝗴 𝗗𝗜𝗣𝗞 is ideal for securely fixing pressure-resistant insulation up to 160 mm thick such as pol...
30/05/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗿𝗲𝗻𝗱𝗲𝗿 𝗳𝗶𝘅𝗶𝗻𝗴 𝗗𝗜𝗣𝗞 is ideal for securely fixing pressure-resistant insulation up to 160 mm thick such as polystyrene boards, wood wool lightweight panels and PU panels in concrete, solid and perforated brick. When using solid building materials, the GFK nail has to be shortened at the tapered breakage point. The render fixing DIPK comprises a white plug sleeve with attached disc and a glass-fibre reinforced plastic nail. The DIPK is inserted using a hammer. This saves time and money. The glass-fibre-reinforced plastic nail reduces the heat transmission and prevents marks on the plaster surface.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗳𝗿𝗮𝗺𝗲 𝗳𝗶𝘅𝗶𝗻𝗴 𝗦𝗫𝗥 is a plug made from high-quality nylon. Thanks to its special plug geometry, the SXR can be...
29/05/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗳𝗿𝗮𝗺𝗲 𝗳𝗶𝘅𝗶𝗻𝗴 𝗦𝗫𝗥 is a plug made from high-quality nylon. Thanks to its special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low anchorage depth of just 50 mm, the frame fixing can work particularly cost-effectively. The low drill hole depth saves time and reduces bit wear. The SXR is offered with a diameter of 10 mm up to a anchor length of 260 mm with hexagonal screws made from zinc-plated steel, hot-dip galvanised steel and stainless steel. The European Technical Approval offers added safety. The SXR with hexagonal screw and moulded washer is particularly recommended for fixing metal constructions.

The expert and approval-compliant installation of chemical fixings requires the use of stainless steel brushes for clean...
28/05/2025

The expert and approval-compliant installation of chemical fixings requires the use of stainless steel brushes for cleaning drill holes in concrete and masonry. The fischer steel brushes BS with stainless steel bristles are approved for automatic or manual drill hole cleaning. The colour coding makes it easy to select the right brush for the relevant drill hole diameter.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗞𝗣𝗠 𝟮 𝗣𝗹𝘂𝘀 𝗱𝗶𝘀𝗽𝗲𝗻𝘀𝗲𝗿 is suitable for squeezing out one-and two-chamber sealant and adhesive cartridges. The ...
27/05/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗞𝗣𝗠 𝟮 𝗣𝗹𝘂𝘀 𝗱𝗶𝘀𝗽𝗲𝗻𝘀𝗲𝗿 is suitable for squeezing out one-and two-chamber sealant and adhesive cartridges. The 18:1 transmission ratio enables rapid and gentle squeezing even of highly viscous compounds. Thanks to the freely accessible and rotatable cartridge insert, the cartridge can be optimally aligned and also reaches hard-to-reach areas. The adjustable overrun stop prevents low-viscosity compounds from overrunning.

Metal manual setting tool with ergonomic plastic handle and hand impact protection for quick, safe fixing of FISCHER Ham...
20/05/2025

Metal manual setting tool with ergonomic plastic handle and hand impact protection for quick, safe fixing of FISCHER Hammerset anchors EA II.

The 𝗙𝗦𝗨-𝗗𝗧 𝗱𝗶𝘀𝗮𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝘁𝗼𝗼𝗹 is used for easy dismantling of FSU undercut anchors.
20/05/2025

The 𝗙𝗦𝗨-𝗗𝗧 𝗱𝗶𝘀𝗮𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝘁𝗼𝗼𝗹 is used for easy dismantling of FSU undercut anchors.

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗶𝗻𝗷𝗲𝗰𝘁𝗶𝗼𝗻 𝗺𝗼𝗿𝘁𝗮𝗿 𝗙𝗜𝗦 𝗩𝗟 is a vinyl ester hybrid mortar with approval for fixing standard applications in cra...
19/05/2025

The 𝗙𝗜𝗦𝗖𝗛𝗘𝗥 𝗶𝗻𝗷𝗲𝗰𝘁𝗶𝗼𝗻 𝗺𝗼𝗿𝘁𝗮𝗿 𝗙𝗜𝗦 𝗩𝗟 is a vinyl ester hybrid mortar with approval for fixing standard applications in cracked concrete and masonry. The FIS VL is processed with the approved system components FISCHER threaded rod FIS A and FISCHER internal-threaded anchor RG M I indoors and outside. The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility. The shorter hardening time of the variant FIS VL HIGH SPEED enables swift work progress even at low temperatures.

Address

D/404, D. K Tower, Sector 20, New Mumbai
Airoli
400708

Website

Alerts

Be the first to know and let us send you an email when Config Structures posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category