Fluid Power Engineers, is established in 1989 and engaged in manufacturing and supplying Suction Strainer, Return Line Filter- Tank Mounted, Flow Diffusers, Oil Level Indicators, Fluden Breather, Curved Tooth Gear Coupling, Filter Elements, Pipe Clamps, Check Valve andHydraulic Accessories in India and exporting the products to many countries. The company is ‘ISO 9001 : 2008 certified. The company
is situated in well developed industrial city of Gujarat – western India. Equipped with latest technology and well trained human resources. Application of the products manufactured by company is in mechanical industries, machine tools, construction machineries, earthmoving machineries and all equipment oil hydraulically operated. Fluden Suction Strainer
Protecting hydraulic pumps and control systems from solid contaminants, Suction Strainer are gaining immense popularity in the market. The construction of the strainers is done in such a manner that these can be easily installed into suction lines of pumps. We always advise our clients to install the suction strainer below the minimum oil level of the reservoir. Unlike the ordinary strainers, our range of suction strainer elements are supplied with a bypass valve so that the high pressure drops caused by contaminated elements or high viscosity fluids during cold starting can be easily reduced. Tank Mountain Stainer
FLUDEN Tank –Mounted Strainer (either suction or return) can be installed through a tank top by welding a standard bell reducer (coupling) over a hole cut in the top. A standpipe, threaded into the coupling, need be only long enough to stay below the lowest fluid level encountered .The strainer may be removed for servicing without draining the tank tank-mounted strainers and diffusers install through the side wall, or through the hole in which they are mounted, and access to the tank interior is three styles: for suction straining, return –line straining, or return-line diffusion. Diffusers have no wire cloth elements and pump cavitations caused by flow disturbance at the pump inlet. Tank Filler Breather
These provides filler parts for hydraulic power unit tanks or other liquid reservoirs. Liquids are strained as they are added to the Tank and it lets the Tank Breather filtered air. The 30 mesh filter screen removes dirt and debris from liquids as they enters the system. The breather cap filters the air , trapping air borne dirt down to 40 – or -10 – micron leves . It permit air passage at up to 25 cfm. Mounting hardware, gaskets and templates are supplied. Return Line Filter
We specialize in manufacturing Return Line Filter - Tank Mounted which is made available in different sizes. It is manufactured using quality aluminium and is widely used in mineral industry and petrochemical industry. It is used for filtration equipments. It is used in the pressure line of hydraulic systems. It is non-abrasive and requires minimal maintenance. We have effective production capacity and made available. Fluden Tooth Gear Coupling & Sleeve
FLUDEN Curved –tooth gear couplings are flexible shaft connections for a positive torque transmission and specifically suitable to compensate for axial, radial and angular shaft misalignment. According to the well – known effect of curved – tooth gear couplings any edge pressure in the spleen in case of angular and radial displacements is avoided so that FLUDEN couplings are almost free from wear. The material polyamide allows for maintenance – free continuous operation with very low friction on the teeth.
