Gangl Motorsport

Gangl Motorsport Official page of the GM Team. 🏁 We offer high-quality custom components for race- and custom cars.

GM is going on a holiday! This year, we have shifted our summer holiday to mid-november. Once we are back, it's already ...
18/11/2025

GM is going on a holiday!

This year, we have shifted our summer holiday to mid-november. Once we are back, it's already christmas. Basically - See you next year!

We will try to answer to your messages from time-to-time.

𝗘𝟰𝟲 𝘁𝗼 𝗘𝟮𝟴 𝗵𝗲𝗮𝘁𝗲𝗿 𝘃𝗮𝗹𝘃𝗲 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁If you own an E28, you probably know about the imfamous E28 heater valve. They are a...
09/11/2025

𝗘𝟰𝟲 𝘁𝗼 𝗘𝟮𝟴 𝗵𝗲𝗮𝘁𝗲𝗿 𝘃𝗮𝗹𝘃𝗲 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁

If you own an E28, you probably know about the imfamous E28 heater valve. They are all falling apart, rebuild kits fail after a year, the new OEM part is super expensive.
Enthusiasts came up with the idea to use E46/E39 base-spec heater valves instead, which are easy to plump into the original coolant system.
We put together a kit with everything you need for the retrofit: a new valve, a stainless steel adaptor bracket, and a new connector kit.

📦 Avaliable off-the-shelf
👉 Contact us if you need one!

𝗠𝟲𝟬 𝘁𝗼 𝗠𝟱𝟬 𝗧𝗕 𝗔𝗱𝗮𝗽𝘁𝗲𝗿If you want to run an M60 big throttle body with an M50 intake manifold, we have just the solution ...
04/11/2025

𝗠𝟲𝟬 𝘁𝗼 𝗠𝟱𝟬 𝗧𝗕 𝗔𝗱𝗮𝗽𝘁𝗲𝗿
If you want to run an M60 big throttle body with an M50 intake manifold, we have just the solution for you.

🏁 Flow optimised
🛠️ CNC machined from 6061-T6 alloy
⚫ Black anodised
✔️ Comes with new hardware and seal
📦 Avaliable as pre-order only with 2-3 weeks lead time
👉 Contact us if you need one!

🇬🇧 𝗘𝟯𝟰 𝗖𝗮𝗿𝗯𝗼𝗻 𝗙𝗶𝗯𝗿𝗲 𝗙𝗿𝗼𝗻𝘁 𝗦𝘁𝗿𝘂𝘁 𝗕𝗿𝗮𝗰𝗲🏁  We custom made this CFRP brace for a customer's E34. CNC machined 304 inserts, s...
24/09/2025

🇬🇧 𝗘𝟯𝟰 𝗖𝗮𝗿𝗯𝗼𝗻 𝗙𝗶𝗯𝗿𝗲 𝗙𝗿𝗼𝗻𝘁 𝗦𝘁𝗿𝘂𝘁 𝗕𝗿𝗮𝗰𝗲

🏁 We custom made this CFRP brace for a customer's E34.
CNC machined 304 inserts, special LocTite high-temp epoxy glue, 3mm TIG welded 304 sides. Stiff, and light - coming in at a whopping 1450grams for the complete unit.‏

🇭🇺 𝗘𝟯𝟰 𝗦𝘇𝗲́𝗻𝘀𝘇𝗮́𝗹𝗮𝘀 𝗘𝗹𝘀𝗼̋ 𝗧𝗼𝗿𝗼𝗻𝘆𝗺𝗲𝗿𝗲𝘃𝗶́𝘁𝗼̋
🏁 Egyedi megrendelésre készítettük ezt a CFRP toronymerevítőt egy E34-hez.
CNC-megmunkált 304-es betétekkel, speciális, magas hőállóságú Loctite epoxival, valamint 3 mm-es TIG-hegesztett 304-es oldalelemekkel.
Merev, mégis könnyű – a teljes szett mindössze 1450 grammot nyom.

🇬🇧 𝐌𝟑𝟎 𝐁𝐥𝐨𝐜𝐤𝐨𝐟𝐟 𝐏𝐥𝐚𝐭𝐞 / 𝐌𝐀𝐏-𝐒𝐞𝐧𝐬𝐨𝐫 𝐌𝐨𝐮𝐧𝐭If you want to do the flipped-intake mod, also known as 'Alpina-Style intake' on...
20/07/2025

🇬🇧 𝐌𝟑𝟎 𝐁𝐥𝐨𝐜𝐤𝐨𝐟𝐟 𝐏𝐥𝐚𝐭𝐞 / 𝐌𝐀𝐏-𝐒𝐞𝐧𝐬𝐨𝐫 𝐌𝐨𝐮𝐧𝐭
If you want to do the flipped-intake mod, also known as 'Alpina-Style intake' on your late M30, this is for you. Not only is this a blockoff plate, for where the original throttle body used to be, it also acts as a mounting plate for the combined IAT + MAP sensor for your standalone system.


🛠️ CNC Machined from 6061-T6 alloy
⚫ Black anodised - other colours available
✔️ Uses Viton O-rings to seal - no leaks, reausable
🔩 Comes with new stainless A2 hardware - Yellow zinc plated available
🏁 Mounts the BOSCH Motorsport PST1/3 sensor!
📦 Avaliable off-the-shelf
👉 Contact us if you need one!



🇭🇺 M30 falazó / MAP-szenzor tartó
Ha szeretnél egy fordított szívósort, amit úgy is ismerni mint az 'Alpina-style szívósor', akkor ez neked szól. Nem csak lefalazza a gyári pillangó helyét, de helyet a 2-az-1ben MAP + IAT szenzornak - tökéletes választás egy standalone motorvezérlőhöz!⠀

🛠️ 6061-T6 Aluból CNC marva
⚫ Feketére eloxálva - más színek is elérhetőek
✔️ Viton O-gyűrű mint tömítés - nem ereszt, újrahasználható
🔩 A2-es rozsdamentes csavarokkal, vagy választható sárga-horganyzottal
🏁 A BOSCH Motorsport PST1/3 szenzort használja
📦 Raktárról elérhető
👉 Írj, ha szükséged van egyre!

Cím

Sopron
9400

Weboldal

Értesítések

Ha szeretnél elsőként tudomást szerezni Gangl Motorsport új bejegyzéseiről és akcióiról, kérjük, engedélyezd, hogy e-mailen keresztül értesítsünk. E-mail címed máshol nem kerül felhasználásra, valamint bármikor leiratkozhatsz levelezési listánkról.

A Vállalkozás Elérése

Üzenet küldése Gangl Motorsport számára:

Megosztás