Must Weld Motorsport

Must Weld Motorsport Here at Must Weld Motorsport we do roll cages chassis work and any other fabricating needs.
(1)

I NEED A PULSAR GTX 3076 GEN 2 TWIN V BAND!!! 🙏 Right I have a problem with my mk1. When I crashed in Scotland my interc...
24/08/2026

I NEED A PULSAR GTX 3076 GEN 2 TWIN V BAND!!! 🙏 Right I have a problem with my mk1. When I crashed in Scotland my intercooler got pushed back but was undamaged. Unknowingly it’s hit the turbo and I think it’s bent the housing on a funny angle and it’s now basically fu**ed. Iv spoke to pulsar and unfortunately due to Chinese customs I can’t get another one till the week after the lz world tour… something I really wanted to do plus im meant to be at gravity this weekend. Does anyone have a turbo new/used…? I can replace it or buy it…. Please tag and share I’m desperate to get it fixed 🙏 thank you.

I’m gutted to say I won’t be competing this weekend at Drift League GB as I haven’t been well the last few weeks and I’m...
15/08/2026

I’m gutted to say I won’t be competing this weekend at Drift League GB as I haven’t been well the last few weeks and I’m now running behind on work and unfortunately work takes priority over drifting… good luck to everyone competing.

Follow ⬇️

MustWeld Motorsport Danny Greenwood Protezione Autoworks Pulsar Turbos UK Destroy or Die Arron grantham ProFormance Metals Auto Perfection MK1 Golf Owners Club

Nice simple 6 point cage done in this e30 last week. All tube from ProFormance Metals
06/07/2026

Nice simple 6 point cage done in this e30 last week.

All tube from ProFormance Metals

Anyone remember I did some filming in my workshop a while ago…? This is what I was doing. Pretty cool little video. Go c...
30/06/2026

Anyone remember I did some filming in my workshop a while ago…? This is what I was doing. Pretty cool little video. Go check them out.

😎👌
29/06/2026

😎👌

20/06/2026

The video got cut short so I’ll post it again.

Multipoint cage done this week on this kit car. Scroll to find the video explanation. All tube from ProFormance Metals ...
20/06/2026

Multipoint cage done this week on this kit car. Scroll to find the video explanation.

All tube from ProFormance Metals

Part 3 BIG CRASH! Had a by run into top 16. Then once again I drew up against Martin Wonnacott we seem to drive together...
18/06/2026

Part 3 BIG CRASH! Had a by run into top 16. Then once again I drew up against Martin Wonnacott we seem to drive together a lot for some random reason lol but for a change I qualified higher than him so I led first. Had a bit of a scrappy lead but wasn’t terrible. So i pushed super hard in my chase. I wanted to transition straight on his door but i got a bit keen and went too early. That was the start of a bad situation lol. I straightened up slightly to get back on line and went a tad deep and dropped a wheel. At this point I couldn’t see s**t! I felt the wheel dip into the gravel then next thing I knew I was going up the bank. I slammed on the brakes and just slid into the rsj. I had no idea I was going to hit it until I did as I couldn’t see. Still haven’t looked at the car yet but I’m hoping it’s just a few panels and a new inter cooler 🤞🤞 not sure when I’ll have time to do it but I will try and fix it in the next few weeks. 🤞

So a quick summary of the weekend. I tried to be more aggressive and drive better which I 100% did but it came at a cost. I learnt loads and have way more faith in my self so that’s a big bonus! Can’t wait till round 4 pembrey! 😎👌 thanks to Nathan Rudd for spotting for me 💛

Once again big thank you to all my sponsors for the continuous support!

Thank you to Reinhold Media for the livestream 🙏

Follow ⬇️

MustWeld Motorsport Danny Greenwood Protezione Autoworks Pulsar Turbos UK Destroy or Die Arron grantham ProFormance Metals Auto Perfection MK1 Golf Owners Club

I’m super excited to announce that Fuelab and TurboZentrum UK are coming on board and we will be working together ready ...
15/06/2026

I’m super excited to announce that Fuelab and TurboZentrum UK are coming on board and we will be working together ready for the 2027 season. Fuelab will be supplying a full fuel system for the mk1 ready for the big refresh. Instead of a separate fuel cell, swirl pot, pumps and filter, they are supplying a full built in unit. So basically all the pumps, swirl pot are built into the tank. Meaning it will take up less room, be far neater, easier to work on and way less pipes! And with a few bolts the pumps etc will come out and be easy to swap or maintain. For any parts for your drift car be it fuel related or anything else go check out TurboZantrum UK they have it all!

Always a pleasure to run doors with Martin! 😎👌 72mph is some lick up there! I wonder what it will do Ona 245/35/17 and a...
10/06/2026

Always a pleasure to run doors with Martin! 😎👌 72mph is some lick up there! I wonder what it will do Ona 245/35/17 and another 200hp… 🤓😜

Address

Worcester

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm
Saturday 8am - 5:30pm

Website

Alerts

Be the first to know and let us send you an email when Must Weld Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category