CHG Classics

18/06/2026

Part number 32000 Bonnet pivot bolt back in stock.

We have revised the design with 3mm more thread on. We found with modern rivnuts that the original ones were a touch short.

We will be selling them individually or as a kit below with new m6 rivnuts.

Older models used 1/4 unf nuts and pivot bolts so if replacing these you will need our kit with new rivnuts aswel.

08/06/2026

Essex V6 engine lifting brackets available soon!!

😎

04/06/2026

Our OE fuel pumps are back in stock.

Brand new Genuine R Part fuel pump for the 850cc engine. This fits all 850cc engines with the black insulating spacer. Failure to have the spacer will damage the pump.

07/05/2026

Our push on Speedo cables are back in stock, hoping the screw on will be following shortly!

https://chgclassics.co.uk/products/speedo-cable-push-on?_pos=1&_sid=e280d253a&_ss=r

Brand new UK made speeco cable for Robin, Rialto, Fox and Kitten models upto approx 1997 with the push on end for the large smiths speedo. Comes with the grommet on the cable for sealing it to the bulkhead.

01/05/2026

Nothing better than to get the spray gun out when it’s hot weather 😎

01/05/2026

Reliant Kitten/Fox lower wishbone nuts now zinc plated and available in our shop.

These are slightly thicker steel than originals and the correct UNF thread.

https://chgclassics.co.uk/products/lower-wishbone-nut?_pos=1&_sid=a30d9347c&_ss=r

29/04/2026

This is what a spring washer looks like after a piston has hammered it to death!

When removing the carb for work, please put a piece of cloth in/over the inlet manifold to avoid this happening!

29/04/2026

Interesting use of a pop rivet!

07/04/2026

Wow! What a weekend. Over 90 orders all gone out today!

Thank you everyone for your continued support! It means a world to us and means we can keep supporting the Reliant marque!

07/04/2026

New stock item!

SS1 front upper wishbone bolt and nuts in the correct 10.9 high tensile strength.

£6.99 each.

Front top wishbone bolt for the SS1. Comes with nylon nut. these are the correct 10.9 high tensile grade bolts.