Wessex Hydraulic Services

Wessex Hydraulic Services Established in 1981, we provide support and spares for all types of hydraulic presses and equipment. Design, install and commission hydraulic systems.

What we do.....

Service, repair, maintain and refurbish hydraulic presses, guillotines and associated equipment. Supply, refurbish and repair hydraulic pumps and associated equipment. Supply new and refurbished hydraulic presses. Make and supply custom made hydraulic power packs.

Did you know that we stock Hydraulic 32 and Hydraulic 46 oil here on the premises?. Available in 20 Litres , 25 Litres a...
03/06/2026

Did you know that we stock Hydraulic 32 and Hydraulic 46 oil here on the premises?.
Available in 20 Litres , 25 Litres and 205 Litres.
Please call ahead for availability and prices πŸ™‚

Here at WHS we love receiving such wonderful feedback. This review came in this week and we are extremely grateful to th...
30/04/2026

Here at WHS we love receiving such wonderful feedback. This review came in this week and we are extremely grateful to the lovely customer who posted the review. Thank you 😊

Yesterday our engineers completed their IPAF 3a & 3b training with Global FLT Ltd . They had a lovely day for being outs...
01/04/2026

Yesterday our engineers completed their IPAF 3a & 3b training with Global FLT Ltd . They had a lovely day for being outside with beautiful 🌞. All passed with flying colours. Well done everyone!

Wishing all our valued customers and suppliers a very Happy Easter 🐰🐣. WHS will close at 5pm on Thursday 2 April and re-...
31/03/2026

Wishing all our valued customers and suppliers a very Happy Easter 🐰🐣.

WHS will close at 5pm on Thursday 2 April and re-open on Tuesday 7 April at 8am.

PRESS FOR SALE ....Refurbished Aztec 275 Ton Hydraulic Press700mm x 700mm x 50mm square electrically heated platens.Sing...
29/01/2026

PRESS FOR SALE ....

Refurbished Aztec 275 Ton Hydraulic Press

700mm x 700mm x 50mm square electrically heated platens.
Single acting main ram.

Daylight - 400mm. Ram stroke - 400mm.

Maximum temperature - 200 degrees.

Working height of the lower table from the floor - 1320mm. Width - 2100mm. Depth - 1250mm. Height - 2550mm.

Approximate weight - 8 Tons.

Power pack assembly- Located on the left-hand side of the press, inclusive of 2 stage power pack assembly. The power pack will provide the facility of: Fast/slow approach. Slow/fast for opening facilities.

Control Consul- Located on the right-hand side of the press, inclusive of an engraved legend plate. Manual open/close pushbuttons. Cycle stop pushbutton. Selector switch - manual/auto cycle.

Red Lion HMI display to provide the facility of: Product pre-set recipe. Fast/slow setpoint. Maximum pressure setpoints. Top and bottom temperature controllers - to include heating on/off /overnight on-off timer - via the HMI display.

Delivery and commissioning available at an additional cost.

Please contact us for more details.

Price: Β£29,725 Plus VAT.

Press For Sale:Used 19 Tonne Daniels Hand Operated Upstroke Hydraulic Press (Ref 3766)This Daniels 19 ton up stroking hy...
15/01/2026

Press For Sale:

Used 19 Tonne Daniels Hand Operated Upstroke Hydraulic Press (Ref 3766)
This Daniels 19 ton up stroking hydraulic press with electrically heated platens has been fully refurbished.

Complete new rod assembly with bronze glands and new main ram seals.

New bronze table guides x4 and new heat insulation x1.

Surface ground moving table and press head.

Complete new hand pump assembly with corresponding oil reservoir with solid/flexible pipework.

New pressure gauge.

Complete refurbishment of the top and bottom platens, 25cm width x 36cm depth. Both faces of existing platens have been surface ground. Replacement heating elements - working temperature 240Β° max.​Upgraded heat insulation, high density H330 - maximum working temperature 280Β°.

Complete new electrical control panel including x2 West controllers with SSR. o/p and with on/off selector switches. Process timer with relay output. X2 SSR, with fuse/MCB protection. Sounder and/or indicator for end of cure time, or end of cycle.

Two thermocouples. Flying lead with three-phase industrial plug.

The press has been fully tested at the WHS workshop and finished in European industrial green. Calibration certificates will be provided for the pressure gauge.

To include: Electrical drawings and original press specification datasheet.

Price: Β£10,900 plus VAT.
Delivery and commissioning available at additional cost, if required.

Delivery: Four to five working days.

01/01/2026
We would like to wish all of our customers and suppliers a very Merry Christmas and a fantastic 2026!   We look forward ...
24/12/2025

We would like to wish all of our customers and suppliers a very Merry Christmas and a fantastic 2026! We look forward to seeing you all in January πŸŽ…β„οΈπŸŽ„πŸŽ

Merry Christmas and Best Wishes for the Year Ahead.With 2025 drawing to a close, we would like to wish you and everyone ...
19/12/2025

Merry Christmas and Best Wishes for the Year Ahead.

With 2025 drawing to a close, we would like to wish you and everyone at your company a very Merry Christmas and all the best for the year ahead.
We would like to thank all of our customers for their valued business with Wessex Hydraulic Services over the past year and we look forward to providing any assistance required in 2026.
2025 has been a very busy year for us, with machine breakdowns, maintenance and servicing, plus the supply of replacement parts.
We have invested in a Scissor Lift, which has already proved its worth on customer's sites. We have also purchased a new fully equipped van, to ensure that our fleet is reliable and ready to respond to our customer's urgent breakdowns, or routine maintenance, throughout the UK.
We are heartened to hear that many of our customers are keeping busy and even expanding, or purchasing replacement machinery to keep up with their production demands.
We would like to take this opportunity to emphasise the importance of regularly having your equipment serviced. In a similar way to regularly having your car serviced, this can help to prevent costly/inconvenient downtime and high repair bills. Regular servicing can also extend the life of your equipment. Follow-up service check sheets are provided, highlighting any issues found with the equipment that need attention.
Whether you need a site visit or some spare parts, we are always happy to help. Please call us on: 01225 752550, or email : [email protected]
We would once again like to wish you and your company all the best for a successful 2026.
With best wishes.
The Team at Wessex

Please see our Christmas opening hours below πŸŽ„β„οΈπŸŽ…πŸŽ
10/12/2025

Please see our Christmas opening hours below πŸŽ„β„οΈπŸŽ…πŸŽ

Address

Trowbridge

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 5pm

Telephone

+441225752550

Alerts

Be the first to know and let us send you an email when Wessex Hydraulic Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wessex Hydraulic Services:

Share