Stickrz n Stuff

Stickrz n Stuff Offering premium quality vinyl decals in various colours and designs, along with motor club stickers

Check out our range of air fresheners over on the website! www.stickrznstuff.comWhy not grab yourself one or two whilst ...
16/09/2025

Check out our range of air fresheners over on the website! www.stickrznstuff.com

Why not grab yourself one or two whilst you’re getting a lanyard, keychain or sticker? 😁

* NEW OLD STOCK: Selling these off so we can introduce new stock *Check out our range of clearance  t-shirts over on the...
10/09/2025

* NEW OLD STOCK: Selling these off so we can introduce new stock *

Check out our range of clearance t-shirts over on the website! www.stickrznstuff.com

We’ve restocked some of our side repeaters which are the black/clear dynamic LED ones🥳 The MK1 Ka ones also fit the Spor...
03/09/2025

We’ve restocked some of our side repeaters which are the black/clear dynamic LED ones
🥳
The MK1 Ka ones also fit the SportKa, StreetKa & MK4/5 Fiesta
🚙
We have also restocked the units to fit the MK2 Ka/Fiat 500! 😁
🛻
Available from our website: www.stickrznstuff.com
😁

Some cold weather advice for our customers:Fitting decals at this time of the year is not recommended due to the low tem...
11/11/2024

Some cold weather advice for our customers:

Fitting decals at this time of the year is not recommended due to the low temperatures which could affect the decal sticking to your vehicle.

However, if you really must fit your graphic, here's a little advice ...

Clean the area first - for glass you can use a solvent based cleaner to remove any contaminants or residue, for body panels use car shampoo or some soapy water.

Dry the area with a lint free cloth.

Before fitting your decals, lightly heat the back of them with a hairdryer (if you don't have a hairdryer, place them near a warm radiator for a few minutes). Ensure not to overheat the decals!

Head back outside and peel the paper transfer tape away from the backing paper.

Apply to the vehicle and (ideally) run a squeegee over the decal a few times to push any air bubbles out. If you don't have a squeegee you could use a debit/credit card lightly as an alternative.

Leave the transfer paper in place and rub around in circles using the palm of your hand to get some heat back into it.

Lastly, slowly peel away the transfer paper, starting at the corner and working diagonally.

Your graphic should now be in place and looking great.

Be careful when using ice scrapers or other similar devices when the car is cold, as the stickers will move or slide off the car very easily!

*Photographs attached of decals added using this method

Check out our range of missile pull jet tag keyrings over on the website! www.stickrznstuff.com
03/07/2024

Check out our range of missile pull jet tag keyrings over on the website! www.stickrznstuff.com

Silicone key covers and available for the MK1 & MK2 Ka!🔑 The MK1 Ka type fits several Ford models using the older type 3...
27/06/2024

Silicone key covers and available for the MK1 & MK2 Ka!
🔑
The MK1 Ka type fits several Ford models using the older type 3 button central locking remote 🔑

Available now on the website: www.stickrznstuff.com
🤘

We’ve restocked some of our side repeaters which are the black/clear dynamic LED ones🥳 The MK1 Ka ones also fit the Spor...
26/06/2024

We’ve restocked some of our side repeaters which are the black/clear dynamic LED ones
🥳
The MK1 Ka ones also fit the SportKa, StreetKa & MK4/5 Fiesta
🚙
We will also be restocking the ones to fit the MK2 Ka/Fiat 500 soon! 😁
🛻
Available from our website: www.stickrznstuff.com
😁

Has your Ka’s coolant sensor stopped working? Or developed a leak?We have available OEM spec coolant sensors for the MK1...
25/06/2024

Has your Ka’s coolant sensor stopped working? Or developed a leak?

We have available OEM spec coolant sensors for the MK1 Ka, SportKa and StreetKa with the Duratec engine. These also fit early MK6 Fiesta’s that came with the 1.3 Duratec engine.

The sensor comes complete with a new o-ring and a retaining clip.

Available over on our website: www.stickrznstuff.com

ELM327 OBD2 Bluetooth scanner works with IOS and Android.* Plug and play - no tools required* Easy to connect with Bluet...
25/06/2024

ELM327 OBD2 Bluetooth scanner works with IOS and Android.

* Plug and play - no tools required
* Easy to connect with Bluetooth
* Easy to use with user friendly app
* Works with most OBD2 compliant cars from 1996 onwards
* Read error codes
* Diagnose and turn off engine management light (EML)
* View live data and gauges whilst driving

With Apple IOS devices you can use apps from the App Store such as DashCmd/Car Scanner Pro and with Android Torque is a well known and recommended app to use.

Available over on our website: www.stickrznstuff.com

deal for the cold mornings, we have available gear k**b hoodies! 🥶 😂£3 each and price includes postage within the UK!Ava...
27/11/2023

deal for the cold mornings, we have available gear k**b hoodies! 🥶 😂

£3 each and price includes postage within the UK!

Available now over on our website, link in the bio 😄

**b **bhoodie

Address

Swansea

Alerts

Be the first to know and let us send you an email when Stickrz n Stuff posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share