Preheat Engineering Ltd

Preheat Engineering Ltd Preheat Engineering is the designer and manufacturer of PEREGRINE and FALCON engine pre-heaters We're here to to get you started when you stop!

www.preheat.co.uk

Please look through our product range and feel free to contact us if you have any queries. Over the years our range of equipment has expanded to meet not only the needs of our customers but the ever changing and developing market as well. Our main equipment lines are listed under products above. However we also design and manufacture many items of equipment to customer specification, from large industrial heaters down to small fittings, flanges and brackets.

Winter failures don’t start in winter. They often start months earlier.By the time temperatures drop and a diesel engine...
03/09/2026

Winter failures don’t start in winter.

They often start months earlier.

By the time temperatures drop and a diesel engine struggles to start, fuel systems begin to gel or equipment starts experiencing unexpected downtime, the underlying problem may already have been developing.

That’s why now is the time to prepare.

Checking heating systems, fuel tanks, fuel lines, filters, electrical connections and other cold weather equipment before winter arrives can help identify potential problems before they become costly breakdowns.

At Preheat Engineering, we believe effective winter preparation is about more than simply adding a heater.
It’s about understanding where heat is needed, how much is required and how the system needs to operate in the real world.
Don’t wait for the first cold morning to find out your equipment isn’t ready.

Winter preparation starts now.

Not all pre-heating is the sameWhen someone says, “We need a heater”, the next question isWhat exactly are you trying to...
26/08/2026

Not all pre-heating is the same

When someone says, “We need a heater”, the next question is
What exactly are you trying to heat?

At Preheat Engineering, we manufacture different heating solutions because the location and method of applying heat matter.

Engine coolant – heating and circulating coolant to pre-condition an engine.
Fuel tanks – applying heat where it is needed to help prevent fuel from waxing or gelling.
Oil sumps and tanks – using direct heating where warming the oil itself is the priority.
AdBlue/DEF – requiring a heating solution designed specifically for the application and the properties of the fluid.

The right solution isn't necessarily the heater that produces the most heat.
It’s the one that delivers the right amount of heat, in the right place, in the right way.

That’s why at Preheat Engineering, we don’t just manufacture heaters.
We engineer heating solutions around the application.

If you’re looking at a pre-heating requirement and aren’t sure which approach is best, our team can help you work through the options.

Take a look at our catalogue to see the range of solutions we manufacture:

Preheat Engineering Catalogue -
https://preheat.co.uk/wp-content/uploads/2026/03/Preheat_Eng_Digital_catalogue_26.pdf

Hotter summers. Drier conditions. Greater fire risk.The extreme temperatures we’ve experienced this summer have been dif...
20/08/2026

Hotter summers. Drier conditions. Greater fire risk.

The extreme temperatures we’ve experienced this summer have been difficult to ignore.
With repeated heatwaves, prolonged dry conditions and temperatures reaching 38.1°C in the UK, wildfires have become a very real and devastating consequence.
This year we’ve seen homes destroyed, communities evacuated and firefighters working in exceptionally challenging conditions. Across England and Wales, wildfire numbers have already surpassed previous records.

And as summers become hotter and drier, fire protection and emergency preparedness become increasingly important.
For sites that rely on fire pump systems, the pump needs to be ready to perform when it is needed.

Our Peregrine Fire Pump Coolant Heaters & Engine Kits have been specifically designed for fire pump applications, helping maintain the correct engine coolant temperature and prevent false alarms on the fire pump control panel.
Our 230V heaters can also be supplied as complete engine fitting kits, including relevant mountings, fittings, hose and anti-vibration components.
Compatible with:
• Clarke John Deere
• Clarke Iveco
• Clarke Detroit Diesel Firedriver engines

It may be a small component within a much larger fire protection system, but reliability matters when that system is called upon.

A useful lesson we’ve learned about installing engine heatersAt a recent event, we were discussing engine heater install...
13/08/2026

A useful lesson we’ve learned about installing engine heaters

At a recent event, we were discussing engine heater installation with an experienced engineer, and one important point came up that’s worth sharing.

When a new engine heater is installed, the engine should be run to operating temperature before the heater is energised for the first time.

Running the engine circulates coolant through the system and helps purge any air introduced during installation.

Air pockets can restrict coolant flow through the heater and pipework. If the heater is energised without adequate coolant flow, the heating element can become exposed to air, potentially causing it to overheat and fail prematurely.

Run the engine - circulate the coolant - purge the air - check the system - then energise the heater.

A small but important step that can help protect the heater and ensure it operates correctly.

At Preheat Engineering, our PEREGRINE and FALCON heating systems are designed and manufactured in the UK for a range of engine and generator applications.

A tank heater is much more than just a heating element.Its job is to maintain the fuel at the correct temperature so it ...
07/08/2026

A tank heater is much more than just a heating element.

Its job is to maintain the fuel at the correct temperature so it flows efficiently through the fuel system and atomises correctly through the engine’s injector misting jets.

Cold or gelling diesel can restrict fuel flow and potentially clog filters, fuel lines and injector jets. This can starve the engine of fuel, leading to stalling, poor efficiency and increased NOx emissions.

At Preheat Engineering, our PEREGRINE fuel tank heaters are manufactured from brass for excellent thermal conductivity. The tubes housing the heating elements are electro nickel plated to protect the brass from oxidation and corrosion and help prevent fuel degradation.

The nickel plating also helps provide an even distribution of heat, reducing localised hot spots and helping maintain consistent fuel temperature without degrading the fuel.

Nickel is hard and highly wear resistant, adding durability to the heater and helping it withstand demanding operating conditions over a long service life.

Combined with accurate thermostatic control, the result is efficient, controlled heating that helps maintain fuel quality and supports reliable engine performance.

Sometimes, it’s the engineering you can’t see that makes the biggest difference.

For more information please contact us at Preheat Engineering for expert advice and guidance.

+44 (0)20 8848 1912
[email protected]

How do you choose the correct heater for your engine?Selecting the right engine coolant heater is one of the most import...
30/07/2026

How do you choose the correct heater for your engine?

Selecting the right engine coolant heater is one of the most important decisions when protecting an engine from cold starts and ensuring it is ready to perform when required.
With a range of heater outputs and models available, it can be difficult to know which solution is best. Choosing a heater that is too small may not provide sufficient heat to maintain the engine at its optimum operating temperature, particularly in colder climates. Equally, selecting a heater with more output than your application requires can lead to unnecessary energy consumption and place additional stress on cooling system components over time.

To recommend the most suitable heater, we consider far more than just engine size. Our technical team will assess a number of factors, including:
• Engine capacity and coolant volume.�• The type of application, whether it's standby, prime power or continuous operation.�• The lowest ambient temperatures the engine is likely to experience.�• Installation location, including exposure to wind or harsh environmental conditions.�• Whether a thermosiphon or pumped circulation heating system is the most suitable solution.�• Any additional heating requirements, such as oil, fuel or DEF (AdBlue®) heating.

At Preheat Engineering, we manufacture a wide range of PEREGRINE and FALCON engine heating solutions in the UK, enabling us to provide a heater that's matched to your application rather than adopting a one size fits all approach.
Every installation is different, which is why our experienced technical team is always happy to discuss your requirements and recommend the most effective and energy efficient solution for your engine.

If you're unsure which heater is right for your application, contact Preheat Engineering for expert advice and guidance.

+44 (0)20 8848 1912
[email protected]

Another happy customer!We always enjoy seeing our products installed and working exactly as they were designed to.These ...
22/07/2026

Another happy customer!
We always enjoy seeing our products installed and working exactly as they were designed to.

These photographs show one of our PEREGRINE Fire Pump Coolant Heaters fitted to a customer's fire pump engine using our complete fitting kit.
We think the finished installation looks fantastic!

Our kits are designed to provide everything needed for a neat, professional installation, making life easier for engineers and helping achieve a reliable result.

A huge thank you to our customer for sending us these brilliant photos. It's always great to see our products out in the real world.

If you'd like to know more about our fire pump heating solutions, get in touch with the team.

Please contact our sales team
+44 (0)20 8848 1912
[email protected]

You wouldn’t start cooking in a cold oven… so why start an engine cold?Most of us preheat an oven before cooking because...
16/07/2026

You wouldn’t start cooking in a cold oven… so why start an engine cold?

Most of us preheat an oven before cooking because it reaches the correct temperature more quickly and works more efficiently.

The same principle applies to an engine.

Preheat Engineering’s PEREGRINE engine coolant heaters use thermosiphon heating technology to warm the engine before start-up.

So, how does it work without a pump?

It’s all down to physics.

As the heating element warms the coolant, the hot coolant becomes lighter and rises through the engine. Cooler, denser coolant sinks back to the heater, where it is heated again.

This natural circulation, known as thermosiphon heating, continuously warms the engine without the need for a pump. Once the coolant reaches the set temperature, the built in thermostat switches the heater off and automatically switches it back on when needed to maintain the optimum temperature.

The result is -
Easier engine starting
Reduced wear on the starter motor and battery
Improved oil flow from start-up
Lower fuel consumption and emissions
Greater reliability, especially in colder conditions

Engineering that most people never notice... but everyone relies on.While out walking by the river in Bourne End, Buckin...
08/07/2026

Engineering that most people never notice... but everyone relies on.

While out walking by the river in Bourne End, Buckinghamshire, I came across this SSEN mobile generator connected into the local electricity network.
To most people, it might just look like another piece of equipment. In reality, it's helping keep the lights on while essential maintenance or upgrades take place.
It's a reminder that behind every reliable power supply is careful planning, skilled engineers and dependable equipment. Temporary power solutions allow vital infrastructure work to continue while minimising disruption to homes and businesses.

At Preheat Engineering, we appreciate the importance of dependable engineering. Whether it's temporary power, industrial heating equipment or specialist manufacturing, reliability is what keeps critical projects moving and essential services running.

Sometimes, the best reminders of engineering's importance are found in the most unexpected places, even on a peaceful riverside walk.

The most impressive engineering is the work most people never notice. It's quietly keeping the world running.

Heading to PowerEx Live tomorrow? Make sure you stop by and say hello! We are looking forward to exhibiting at PowerEx L...
01/07/2026

Heading to PowerEx Live tomorrow? Make sure you stop by and say hello!
We are looking forward to exhibiting at PowerEx Live 2026 tomorrow at Rudding Park Hotel & Spa, Harrogate.

📍 Visit us at Table 20
Whether you're responsible for generators, construction equipment, hire fleets, industrial machinery or other critical power applications, we'd love to discuss how our heating solutions can help improve reliability, reduce downtime and protect valuable equipment in cold conditions.
Our products are British designed and manufactured:
*Peregrine engine heaters *Falcon engine heaters *Storage tank heaters *Bespoke DEF and AdBlue heating solutions

Our Managing Director, Simon, along with Jon and Tom from our sales team, will be available throughout the day to answer your questions, discuss your requirements and explore solutions tailored to your application.
At Preheat Engineering, we don't just manufacture standard products. We also design bespoke heating solutions and refurbish existing heaters, helping customers achieve reliable performance with solutions built around their specific operational needs.
If you're attending PowerEx Live, we'd be delighted to welcome you to our stand for a chat and to show you how our products are supporting customers across the power generation and industrial sectors.

Thursday 2nd July 2026 - 9.30am to 4.00pm - Table 20 - Rudding Park Hotel & Spa, Harrogate

We look forward to seeing you there!

Address

Unit A2, Deseronto Trading Estate, St Mary's Road, Langley
Slough
SL37EW

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+442088481912

Website

Alerts

Be the first to know and let us send you an email when Preheat Engineering Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Preheat Engineering Ltd:

Shortcuts

Share

Category