http://www.lenochengineering.com/

Lenoch Engineering, 56 Somers Road, Rugby (2026)

10/07/2025

After a recent health and safety audit identified areas for improvement, one of our customers needed urgent modifications to a busy manufacturing cell. Lenoch responded immediately—our Health & Safety and Installations Managers visited the site to assess, propose, and agree on a solution. We installed new safety fencing, with the option for interlocks and PLC integration available to suit future requirements.
The project was completed quickly and with minimal disruption, helping our customer enhance safety and maintain compliance without delay.
☎️ If you're facing similar challenges, think of Lenoch.
Visit www.lenochengineering.com or call us on +44 (0) 1788 576 434 to get in touch.

07/07/2025

Project Spotlight: Custom Coil Storage Racks Installation

We’re proud to share a recent project where we designed, fabricated, and installed a series of heavy-duty material racks for storing metal coils — tailored to meet the specific needs of our customer’s growing operation.
Project Highlights:
• Height: 6 metres
• Width: Just under 3 metres
• Designed for safe, efficient coil storage
• Installed in a tight-access environment with restricted headroom, requiring the racks to be brought in on their side and carefully stood upright.

💬 A word from our customer:
“This project reflects our continued investment in equipment and infrastructure — an important step as we expand to meet record levels of demand.”
We’re thrilled to support our clients as they scale and evolve. This job was a true collaboration — combining smart design, precise engineering, and expert installation.
Special thanks to LISI AEROSPACE and Danny Bostridge for the opportunity and seamless coordination throughout this project. Your trust and teamwork made all the difference.
If your facility needs custom storage or handling solutions, we’re ready to help.

🌐 www.lenochengineering.com
📧 [email protected]
📞 Mainline: 01788 576 434
Out of Hours:
07939 505 300 Laura Manning (Group Sales Director)
07961 397 138 Matt Harrington (Senior Business And Installations Manager)

01/07/2025

24/7 EMERGENCY ENGINEERING SUPPORT
Machinery failure? We’ve got your back—day or night.

Check out what’s been rolling in and out of the shop floor this week for emergency repair—heavy-duty components, critical pumps, and industrial pipework, all getting the Lenoch Engineering treatment.

At Lenoch Engineering, we handle everything from precision remachining and weld repairs to full turnkey rebuilds. From pumps and pipework to industrial components, no job is too big...or too urgent.
- On-site or at our Rugby HQ
- Reverse Engineering + Fabrication
- All materials, including exotic metals
🚨 Rapid Response Guaranteed
📞 Call us now: 01788 567 434
🌐 www.lenochengineering.com
Don’t let downtime stop you—get back to business fast with Lenoch Engineering.

01/07/2025

Our team at Lenoch Engineering successfully delivered a fully automated gate and barrier system — designed, manufactured, powder coated, and installed all within just 1 week!

This bespoke system was tailored for a high-traffic industrial site requiring enhanced safety and controlled access. Key highlights:
- In-house design & fabrication – custom-built to client spec
- Powder coated finish – completed within days
- Delivered & installed on-site – during a Saturday morning window to avoid operational downtime
- Installed between shift changes with full adherence to RAMS and strict Health & Safety protocols

From concept to completion, our focus was on precision, speed, and safety — ensuring zero compromise on quality or compliance.
If you're looking for a dependable partner for industrial automation or access solutions, we’re ready to deliver.
Let’s build smarter together
🔗 www.lenochengineering.com
📧 [email protected]
24/7📱 +44 (0)1788 576 434

04/06/2025

From Drawings to Delivery..
This EN24T stub shaft was urgently manufactured for a quarry customer after an unexpected machine breakdown. In just 14 hours, we took it from engineering drawing to a nearly finished component — now ready for its final operation: precision grinding the journals to bearing size.
🟣 Designed for a tough environment
🟣 Machined with bearing-location accuracy
🟣 Rapid turnaround under tight deadlines
🟣 Built to withstand water and dust ingress
Final steps: inspection and delivery — ensuring our customer gets back to full operation without delay.

Need help fast? Visit www.lenochengineering.com

hashtag hashtag hashtag hashtag hashtag

02/06/2025

From Drawings to Delivery..
This EN24T stub shaft was urgently manufactured for a quarry customer after an unexpected machine breakdown. In just 14 hours, we took it from engineering drawing to a nearly finished component — now ready for its final operation: precision grinding the journals to bearing size.
🟣 Designed for a tough environment
🟣 Machined with bearing-location accuracy
🟣 Rapid turnaround under tight deadlines
🟣 Built to withstand water and dust ingress
Final steps: inspection and delivery — ensuring our customer gets back to full operation without delay.

Need help fast? Visit www.lenochengineering.com

31/05/2025

🚨 When a quarry customer faced a serious issue during a planned outage-a cracked high temperature/high pressure manifold-we stepped in fast.

Collected at 2 AM. Back on site in 3 days.
- Reverse engineered the failed component
- Completed full manufacturing drawings
- Carried out NDT on all welds
- Fully machined and pressure tested
- Delivered and ready to install—all within 72 hours

Our in-house capabilities mean we’re always ready when our customers need us most.

Need urgent support or custom engineering solutions?
Visit: www.lenochengineering.com
Call: 01788 576 434
Email: [email protected]

30/05/2025

Here’s a behind-the-scenes look at components for a bespoke generator supplier, fresh out of the rough machining stage and heading into the finishing cycle.
Manufactured from forged billets, these precision blocks are the foundation of a high-speed spinning flywheel — built to handle immense rotational mass at extreme speeds.
With strict QC control from start to finish, every dimension is meticulously verified on our temperature-controlled CMM to ensure performance and reliability.

Engineered with pride. Delivered with precision.
🌐 Learn more: www.lenochengineering.com
📧 Contact: [email protected]
📞 Call us: +44 (0) 1788 576434

13/05/2025

🚨 Emergency Breakdown? We’ve Got You Covered – SAME DAY! 🚨

When a Pack Plant’s dust filter impellor suffered extreme damage—bent vanes, corrosion, and total failure—downtime meant lost revenue.
Our team sprang into action..

From a badly damaged sample > to a fully rebuilt impellor > Delivered SAME DAY.
- Precision-built
- Reverse-engineered from the wreckage
- Zero compromise on quality
- Plant back online in record time
🚨 24/7 Emergency Service
🚨 Built to last. Delivered fast.

📞 Need urgent help?
Visit www.lenochengineering.com

hashtag hashtag hashtag hashtag

13/05/2025

🔧 Lenoch Engineering: Precision. Performance. Partnership.

Since 1961, Lenoch Engineering has been at the forefront of delivering rapid-response, high-precision engineering solutions. From CNC machining and CAD design to emergency breakdown support and materials handling automation, we provide end-to-end services that keep industries moving.

Our expertise spans across sectors including automotive, aerospace, power generation, food and beverage, and utilities.With 24/7 operations, a dedicated logistics fleet, and a "can-do" attitude, we're committed to minimising downtime and maximising efficiency for our clients.

📍 Location: 56 Somers Road, Rugby, Warwickshire, CV22 7DH, UK
📞 Phone: +44 1788 576434
📧 Email:[email protected]
🌐 Website: www.lenochengineering.com

13/05/2025

This chain conveyor failure was caused by improper flight installation during shutdown—resulting in costly downtime and emergency repairs over the holidays.

Lenoch Engineering stepped in with a fast, effective fix and introduced stricter procedures to ensure it never happens again.

Prevent breakdowns before they happen. Trust experience.

📞 01788 576 434
📧 [email protected]

hashtag hashtag hashtag

22/04/2025

Proud to showcase our standard Automation range of Pallet Handling Rotary Turntable Stations, part of the Maypole/Hazmac Brand.

These Heavy Duty turntables are built for 24/7 continuous manufacturing, and are currently being installed in a 4-cylinder engine production line in the South East.

Robust design with individual clutch mechanisms for minimal maintenance
Fully customizable to suit any assembly weight or configuration
Designed, manufactured, tested, and installed in-house by our expert team

At Lenoch, we offer 24/7 machining services across the UK, ensuring your needs are met no matter the time.
Mainline: 01788 576 434
Email: [email protected]

Lenoch Engineering

10/07/2025

07/07/2025

01/07/2025

01/07/2025

04/06/2025

02/06/2025

31/05/2025

30/05/2025

13/05/2025

13/05/2025

13/05/2025

22/04/2025

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category