GYS Ltd

GYS Ltd GYS Ltd is the UK subsidiary of the internationally leading French manufacturer GYS.

03/06/2026

Meet the GYS ELECTRO-FORCE, a battery-powered push/pull repair system delivering up to 9 tonnes of force for collision repair applications. With selectable 5T, 7T, and 9T force settings, it can be used on light damage to severe impacts. Powered by a 20 V Li-ion battery, it can complete up to 20 full cycles at maximum power on a single charge. Compact, portable, and designed for spreading, compressing, pushing, and pulling, the ELECTRO-FORCE is ideal for bodyshops looking to speed up structural and panel repair work without the restrictions of traditional dent pulling techniques.

01/06/2026

Meet the Diag-Batium 100.12 FV, our NEW 100 Amp battery support unit for charging and supporting batteries during diagnostic work. Designed for both 12 V lead-acid and lithium (LiFePO4) batteries, it provides up to 100 A support during diagnostics, ECU programming, ADAS calibration, MOT services and more, helping maintain stable voltage throughout critical operations. With dedicated charge, diagnostic, and power supply modes, plus recovery functions for deeply discharged batteries, it’s a versatile solution for everyday workshop use. The FV flexible voltage technology and adjustable output voltage make it ideal for garage diagnostics, battery charging, and vehicle reprogramming applications.

28/05/2026

Meet the new Powerduction 37L from GYS, a compact and powerful single-phase 3.7kw induction heater. This new unit is simple to use with single button control and features a new intuitive interface. Designed to heat metal to its core, its perfectly suited for automotive workshops that deal with seized bolts and bearings.

26/05/2026

Meet the new Powerduction 37L Pro from GYS, a powerful single-phase, 3.7 kW induction heater. The new unit has durable wheels for manoeuvring around the workshop and is simple to use with its new intuitive interface and single-button controls. Designed to rapidly heat the metal to its core, it’s perfectly suited for automotive workshops that are looking to unseize stubborn bolts, loosen fittings and more.

22/05/2026

We cut through 25 mm mild steel effortlessly using the NEOCUT 105 T400, a high-performance three-phase plasma cutter built for industrial cutting applications. Delivering up to 105 A at 100% duty cycle, it provides clean, precise cuts on steel, stainless steel, and aluminium, with separation capacity up to 50 mm. Featuring automatic synergic air pressure management, HF-free ignition, and five operating modes including cutting, gouging, marking, and spot, it’s designed for maximum efficiency and consumable life. With CNC compatibility, a modern 3.5” colour interface, and robust casing, the NEOCUT 105 is ideal for fabrication, heavy industrial work, and workshop cutting environments.

20/05/2026

We freed a seized bolt on a tractor using the POWERDUCTION 50LG, a powerful 5.2 kW liquid-cooled induction heater, ideal for agricultural maintenance work. Delivering fast, targeted flameless heat directly into the core of the metal, it releases stubborn bolts and seized parts without damaging nearby components. Thanks to its liquid cooling system, adjustable power settings, and 3 m induction cable, the POWERDUCTION 50LG is ideal for tractor repair, agricultural machinery maintenance, and heavy-duty workshop applications.

18/05/2026

Using induction heating to replace a seized coupling on an industrial motor drive shaft. The GYS induction heating range delivers fast, targeted, flameless heat directly into the metal, helping release seized components without damaging surrounding parts. Ideal for industrial maintenance, shafts, bearings, couplings, and mechanical repair work, induction heating provides a safer, cleaner, and more controlled alternative to oxy-acetylene.

15/05/2026

From exhaust systems and pipes to seized components and fabrication work, the GYS induction heating range delivers fast, precise, flameless heat for a huge variety of applications. Our ring inductor heads are ideal for heating around round components like exhausts, rods, pipes, bearings, and shafts, helping release seized parts quickly without damaging surrounding areas. Safe, accurate, and easy to use, GYS induction heating is designed for garages, workshops, maintenance, and industrial repair environments.

14/05/2026



See the new Wizard SuperTack mode in action on the Titanium 321 AC/DC, a powerful and advanced 320 amp TIG welder. Tacking has never been easier, and SuperTack leaves minimal cleanup and reduced distortion for aesthetic sheet metal work.

11/05/2026

Meet the NEW GYSPRESS Cobra, a powerful 10-tonne riveter designed for aluminium and multi-material structural repair. Featuring a rapid approach system, it reduces downtime between rivets to help improve productivity in busy bodyshops. The intelligent trigger control allows technicians to half-press and hold panels in position before completing the rivet, helping ensure accurate alignment during repairs. Compatible with both self-piercing and flow-form rivets, and supported by a wide range of interchangeable arms, the GYSPRESS Cobra is built for modern collision repair and structural vehicle repair applications.

Address

Unit 3 Great Central Way
Rugby
CV213XH

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+441926338609

Website

Alerts

Be the first to know and let us send you an email when GYS Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category