The Asbo-MoCo

The Asbo-MoCo Motor vehicle servicing, repairs, custom roll cage, stainless steel exhaust and parts design and manufacture.

We had this lovely supercharged altezza in this week, Matthew Hicks Hickenbottom is a long standing customer and we've d...
16/01/2026

We had this lovely supercharged altezza in this week, Matthew Hicks Hickenbottom is a long standing customer and we've done a lot on this vehicle over the years. From the manual swap, without cutting the tunnel which is the normal way as the trans tunnel is different on an auto, to helping sort the supercharger install and refacing the sc clutch assembly.
Now we tubbed the rear arches for his lovely new wheels and wide body kit.
And as normal we didn't take the short way and fold and tack the inner arches to the outers, after cutting, we rolled the inners to match the outers, let them in and fully welded for a permanent weather tight seal.
Now its off to Iain Hogg at Hoggy's body shop for a full repaint.

We're happy to announce that we can now do Full 4 wheel digital laser alignment! This means that whenever you have any ...
10/01/2026

We're happy to announce that we can now do Full 4 wheel digital laser alignment! This means that whenever you have any suspension components replaced you no longer have to take you vehicle elsewhere to ensure that its tracked right.
Along with other benefits for your track/ drift vehicles.

So back into the swing of things for 2026..We have a new workshop buddy, meet Archer.His first day in the workshop today...
07/01/2026

So back into the swing of things for 2026..
We have a new workshop buddy, meet Archer.
His first day in the workshop today.

19/12/2025

It's been a little but crazy leading upto the end of this year.
We would like to take the opportunity to thank all new and repeat customers and wish you a merry Christmas and happy new year.
We are now closed until the 6th of January.
Any enquiries or contact will be dealt with on our return in 2026.
Again, thanks for all the support.

Bmw e9x 330d, unfortunately this vehicle was rear ended and the exhaust had taken a beating.We removed the damaged front...
07/11/2025

Bmw e9x 330d, unfortunately this vehicle was rear ended and the exhaust had taken a beating.
We removed the damaged front flexi and realigned a couple of slightly crimped bends in the front of the system, then we redesigned and fabricated a full 2½" twin exit system to the customers requirements.

We dont just design and fabricate exhausts for sports cars and performance upgrades.We also make systems for vehicles wh...
07/11/2025

We dont just design and fabricate exhausts for sports cars and performance upgrades.
We also make systems for vehicles where the parts are obsolete or very difficult to source.
This was a cat back system we did recently for a long standing customer that was designed to be as close as possible in all ways to the original system.

After dealing with a back log of work, we have had some time on the Ek9 type r again.Braced the chassis uo and removed t...
07/09/2025

After dealing with a back log of work, we have had some time on the Ek9 type r again.
Braced the chassis uo and removed the floor as the customer was lucky enough to be able to source possibly the last Oe honda floor from the US..

Progress. This is what's required for a vag 3.0tdi v6 timing chain replacement. Anything over 80k amd theyre known for s...
20/08/2025

Progress. This is what's required for a vag 3.0tdi v6 timing chain replacement. Anything over 80k amd theyre known for suffering from chain stretch, in this case on cold start it sounded like a chain always trying to escape..

The next couple of days work..
19/08/2025

The next couple of days work..

It's a pick up kinda day..
13/08/2025

It's a pick up kinda day..

For our next trick, we're going to turn this seive back into a Civic...Ek9's suffer with rot issues and this is not the ...
08/08/2025

For our next trick, we're going to turn this seive back into a Civic...
Ek9's suffer with rot issues and this is not the worst we've seen. However its definitely not the best.
Lots of fabrication on this over the next couple of months...

We are very lucky to be part of the Motor Psycho AA/Fuel Altered team, we fabricate some parts and help support them wit...
31/07/2025

We are very lucky to be part of the Motor Psycho AA/Fuel Altered team, we fabricate some parts and help support them with the build and pit side of things.
They are one of, if not the longest established team in the uk, being formed in 1966.
A family run team run by a close knit group of family and friends, completely self funded with minimal sponsorship or outside financial support.

Address

Tywarnhayle Mine , Porthtowan , Truro
Redruth
TR48FY

Opening Hours

Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+1209485982

Website

Alerts

Be the first to know and let us send you an email when The Asbo-MoCo posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category