WorkMaster Boots

Call Directions Website

WorkMaster Boots WorkMaster™ Boots manufacture specialist protective footwear for industry & emergency response WorkMaster™ Specialist Protective Footwear from Respirex.

The Workmaster Isotec Flame Boot is a heat & flame resistant safety boot conforming to the EN15090 HI3 F3A fire boot sta...
19/10/2026

The Workmaster Isotec Flame Boot is a heat & flame resistant safety boot conforming to the EN15090 HI3 F3A fire boot standard for flame resistance, radiant heat and heat insulation of the sole (250°C for 40 minutes).

These boots are designed for use in areas where there is a risk of sparks from welding or grinding or for close proximity fire fighting. They are also chemical, fuel & oil resistant.

Working with or near high voltage components requires the right equipment to prevent accidents, and whilst footwear migh...
28/09/2026

Working with or near high voltage components requires the right equipment to prevent accidents, and whilst footwear might not be your first thought, it will save a life.

The Workmaster™ Dielectric HV3 boot allows for high voltage live working up to 26.5kV with every boot tested at 30kV. A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap, the HV3 is perfect for working in dangerous electrical environments.⚡⚡

Choosing the right safety boots for your specific requirement can be difficult, thankfully Workmaster Boots have several...
15/09/2026

Choosing the right safety boots for your specific requirement can be difficult, thankfully Workmaster Boots have several lines of boots for a range of industries & scenarios.

Check out this slideshow to see what Workmaster boots are the most suitable for you!

The Dielectric range of boots are electrically insulating boots from Class 0 to Class 3, with each boot offering somethi...
01/09/2026

The Dielectric range of boots are electrically insulating boots from Class 0 to Class 3, with each boot offering something different from the other, with features like toe and step voltage protection being shared across ranges.

Check out the full range of boots & learn about the key traits of each one!

17/08/2026

Check out these gorgeous shots of electrical testing on the Workmaster Dielectric boot!

The Dielectric is an electrically insulating boot with an integral steel toe cap and vulcanised rubber sole for superior slip resistance. The Respirex Dielectric boot allows high-voltage live working at up to 17kV, with every boot tested at 20kV AC, with optional DC testing at 40kV.

The Powered Respirator Protective Suit (PRPS) is a one piece Gas Tight chemical protective suit for emergency response p...
05/08/2026

The Powered Respirator Protective Suit (PRPS) is a one piece Gas Tight chemical protective suit for emergency response personnel made by Respirex, that comes fitted with the Workmaster chemically protective Hazmax™ boot.

The boot features a vulcanised non slip rubber sole & is permanently attached to the suit, providing maximum safety. This collaboration provides the highest level of protection against chemical & CBRN hazards.

The Hazmax lineup of chemical protective boots encompases a wide range of protective boots for various situations. While...
20/07/2026

The Hazmax lineup of chemical protective boots encompases a wide range of protective boots for various situations.

While some traits are shared between all boots including a steel toe cap, some are designed for heat protection, electro-static discharge protection, CBRN incidents and overboots designed for use with work boots.

The Dielectric is an electrically insulating boot that features an integral steel toe cap and vulcanised rubber sole for...
06/07/2026

The Dielectric is an electrically insulating boot that features an integral steel toe cap and vulcanised rubber sole for superior slip resistance.

The boot allows for high-voltage live working at up to 17kV, with every boot tested at 20kV AC, and Step voltage protection up to 35kV.

The Dielectric HV3 Boot is an electrically insulating boot with an integral steel toe cap. The HV3 boot allows high volt...
22/06/2026

The Dielectric HV3 Boot is an electrically insulating boot with an integral steel toe cap. The HV3 boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.

It also features an 200 Joule epoxy coated steel toe cap, a kick off lug and is machine washable u to 40°C.

Things are well underway at Interschutz 2026, & there's plenty more to come!To learn about our complete range including ...
04/06/2026

Things are well underway at Interschutz 2026, & there's plenty more to come!

To learn about our complete range including the Dielectric Pro & Hazmax CBRN, find us with our sister company Respirex in Hall 15, Stand D19.

Address

Redhill

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+441737778600

Website

Alerts

Be the first to know and let us send you an email when WorkMaster Boots posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share