J.Reid Engineering

Call Directions Website Contact the business

J.Reid Engineering Design and manufacture of Containerblast surface preparation modules and shotblasting equipment.

Carrying on from the previous posting, this machine is now finished. The first part will be delivered to the customer to...
15/06/2026

Carrying on from the previous posting, this machine is now finished. The first part will be delivered to the customer tomorrow. There will then be about 3 weeks on site assembling it all as it was too big to assemble in our workshop. This job was started mid January so its been a long build, along side other jobs.

We have started work on a large automatic shot blast machine at our North Wales facility. The machine will use 8 x 11kW ...
20/02/2026

We have started work on a large automatic shot blast machine at our North Wales facility. The machine will use 8 x 11kW wheel units to process components as they pass through the cabinet. Parts will be suspended from an overhead conveyor during blasting.

Fabrication is well underway. Plasma cut sections have been prepared and the first plates assembled. The main body is now taking shape as structural panels and internal sections are positioned and secured.

The project is approximately one third complete. Further fabrication and mechanical installation will follow before the wheel units and conveyor system are fitted. We will share further updates as the build progresses.

The start of the year saw a new 9m Containablast unit being delivered. It has full floor recovery so no brushing up of a...
13/02/2026

The start of the year saw a new 9m Containablast unit being delivered. It has full floor recovery so no brushing up of abrasive is required.
Side doors allow easy access for loading of components.

All motor/gearboxes supplied by STM, supplying a quality product with excellent customer care.

The new Rotablast1000 shotblast machineIts just been delivered to our customer in South Wales. The Rotablast 1000 is a 1...
04/08/2025

The new Rotablast1000 shotblast machine

Its just been delivered to our customer in South Wales.
The Rotablast 1000 is a 1m diameter rotary table shotblasting machine. It utilises a 5.5kW abrasive throwing wheel to blast clean. Ideally suited to clean those multiple small components you have.
Contact us for pricing and availability.

Just finished a job to supply two new drive sprockets to APE-UK.They are for a rubber tracked vehicle. At 600mm diameter...
21/05/2025

Just finished a job to supply two new drive sprockets to APE-UK.
They are for a rubber tracked vehicle. At 600mm diameter they just fitted in our lathe !

#99 Containablast room has just been delivered. This is a 9m (30 foot) 'Hi cube' unit giving a 6.5m long (21 foot) blas...
08/05/2025

#99 Containablast room has just been delivered.
This is a 9m (30 foot) 'Hi cube' unit giving a 6.5m long (21 foot) blast area. Side doors give easier access for those larger components.

Our latest investment is this CNC plasma cutter. The old one served us well the past 17 years.The new machine has a 4m x...
25/04/2025

Our latest investment is this CNC plasma cutter. The old one served us well the past 17 years.
The new machine has a 4m x 2m cutting bed with a Hypertherm XPR 170 plasma unit from Esprit Automation.
This ‘Hi Definition’ unit gives us near laser quality cuts.
Using the same operating system as previous, the lads were able to use it right after commissioning.

Just finished some heavy duty ducting. A difficult job to design and fabricate but we did it. Photos show trial assembly...
07/04/2025

Just finished some heavy duty ducting. A difficult job to design and fabricate but we did it. Photos show trial assembly prior to painting.

A busy time at J.Reid Engineering. Just finished another 6m double Containablast unit. Its ready to be shipped to our cu...
05/12/2024

A busy time at J.Reid Engineering. Just finished another 6m double Containablast unit.
Its ready to be shipped to our customer in Latvia next week.
An ideal solution for shotblasting those bigger parts that do not fit in our standard 6m unit. The double room gives a 4.5m x 4.5m blasting area.

Having our own Containablast unit on site enables us to shotblast prior to powder coating. Its also useful to show poten...
18/10/2024

Having our own Containablast unit on site enables us to shotblast prior to powder coating. Its also useful to show potential customers how it all works.
We take on shotblast work for anyone who requires it in the local area.

Address

Factory Road, Sandycroft
Queensferry
CH52QJ

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 2pm

Telephone

+441244520688

Website

Alerts

Be the first to know and let us send you an email when J.Reid Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to J.Reid Engineering:

Shortcuts

Share

Category