Always First 4 Fixings

Always First 4 Fixings Alwaysfirst4fixings – Your go to for high quality fixings at great prices. Reliable, affordable, and always first choice for your fixing needs!

Contact Us With Any Queries Or Visit Our Website To Place An Order!

❌ That half-turn because the hex key feels “close”… then the bolt rounds off 😬✅ We see it on jobs and DIY benches when y...
07/06/2026

❌ That half-turn because the hex key feels “close”… then the bolt rounds off 😬

✅ We see it on jobs and DIY benches when you grab the wrong standard.
Faithfull’s 30-piece metric and imperial hex key set includes both mm and inch/AF sizes in one organised kit—so you can always use the correct standard for UK and overseas fixings.

Hardened steel keys, short and long arms for torque and reach, plus clearly marked holders to keep sizes easy to grab.

Shop now for quality fixings 👉 alwaysfirst4fixings.co.uk/faithfull-metric-imperial-hex-key-set-30-piece/

❌ Cheap fixings can cost you time, safety and callbacks✅ Quality fixings help keep jobs secure, tidy and built to lastFr...
06/06/2026

❌ Cheap fixings can cost you time, safety and callbacks
✅ Quality fixings help keep jobs secure, tidy and built to last

From decking and shelving to concrete fixings and site installs, the right fixing gives you better hold, less movement, and more confidence on the job.

If you want reliable results first time, choose fixings that suit the material, the load, and the conditions.

Need help picking the right one? Call/text WhatsApp: +44 7349 301797

❌ Not sure which fixing to use?✅ Here’s the quick rundown.Frame fixings are best for fixing window and door frames into ...
05/06/2026

❌ Not sure which fixing to use?
✅ Here’s the quick rundown.

Frame fixings are best for fixing window and door frames into brick, block or concrete.
Anchor fixings are used when you need a strong hold for heavier loads like brackets, battens and fixtures on masonry.

Simple rule:
Frame fixing = frames
Anchor fixing = heavier fixings

Need help choosing the right one for the job? Give us a shout.

❌ Stop guessing screw length on site.✅ Do the 3-check fit test:1) material thickness (what you’re fastening)2) bite dept...
04/06/2026

❌ Stop guessing screw length on site.
✅ Do the 3-check fit test:

1) material thickness (what you’re fastening)
2) bite depth (how much grabs)
3) pilot/drill clearance (so it doesn’t bind)

We see it all the time: too short won’t hold, too long splits board or fouls your drill.

Comment “FIX” and we’ll tell you exactly what to stock for your next board/sheet job. Then shop or learn more at alwaysfirst4fixings.co.uk.

FIX

Loose fitting. Stripped anchor. Door not sitting right.That one fixings problem started with a message from a builder on...
03/06/2026

Loose fitting. Stripped anchor. Door not sitting right.

That one fixings problem started with a message from a builder on site—sent us a quick photo, explained what was moving, and where the fixing was failing.

We matched the right high-performance fixings/fasteners for the material and load, tightened everything back into alignment, and got the job moving again ✅

If you’ve got a job in trouble, contact us for expert advice: alwaysfirst4fixings.co.uk.

That “almost tight” screw keeps cam-outting—why? 😬In timber and MDF, it’s usually the wrong combo of drive type, bit fit...
02/06/2026

That “almost tight” screw keeps cam-outting—why? 😬

In timber and MDF, it’s usually the wrong combo of drive type, bit fit, and screw geometry.

Quick checklist before you drive again:
• Pick the right anti-cam-out screw (coated for grip)
• Use bit-friendly geometry (stays seated under torque)
• Match your drive type (PH/Pozi/Torx)
• Don’t over-drive past the head

We’ll help you match length, gauge, and drive type to the job—timber vs MDF, plus thickness. Message Always First 4 Fixings for a proper fix-up.
visit our website: alwaysfirst4fixings.co.uk/shop

Your tools feel sluggish? ❌Dusty guards, dull bits, loose fixings—then you wonder why work feels harder than it should.✅...
01/06/2026

Your tools feel sluggish? ❌
Dusty guards, dull bits, loose fixings—then you wonder why work feels harder than it should.

✅ Do a “15-minute Friday” reset:
Wipe down dust build-up.
Check/click test your guards & chucks.
Re-torque key fixings.
Swap dull bits/blades before Monday.

Finish by storing batteries/hand tools in a dry, consistent spot so you’re ready when you are—then tell us what you use most and we’ll point you to the right accessories.

Learn more: alwaysfirst4fixings.co.uk/blog

POV: you drill in, the shelf wobbles, and your fix feels pointless. ❌It usually starts with using the wrong fixings into...
31/05/2026

POV: you drill in, the shelf wobbles, and your fix feels pointless. ❌

It usually starts with using the wrong fixings into soft plaster/old brick. You’ll see it loosen again in days.

✅ For a wobbly shelf/loose skirting: we’d switch to the fastener match for the substrate—typically a suitable masonry plug with the correct screw for brick, or the right wall anchor for plasterboard—then tighten with the right size/length.

Ask us at Always First 4 Fixings for: the fixing for your wall type (plaster/brick/plasterboard), plus the screw length to grab solid material.

Learn more at alwaysfirst4fixings.co.uk/blog, or shop now for the right fixings: alwaysfirst4fixings.co.uk/shop 👉

Need Help? Reach Out Your Way! 🔧Got a fixing question or need the right product first time?Our team gives fast, practica...
30/05/2026

Need Help? Reach Out Your Way! 🔧

Got a fixing question or need the right product first time?
Our team gives fast, practical advice for tradespeople and DIYers — no fuss, just straight answers.

Phone: 01253 584340
Email: [email protected]
Website: alwaysfirst4fixings.co.uk
WhatsApp: +44 7349 301797

Contact us for expert advice and reliable service when you need it.

Speed & Reliability: Fixings That Work for You❌ Wrong fixing, wasted time, call-backs✅ Right screw, nail, bolt or anchor...
29/05/2026

Speed & Reliability: Fixings That Work for You

❌ Wrong fixing, wasted time, call-backs
✅ Right screw, nail, bolt or anchor, and the job goes in cleanly the first time 🔧

Whether you’re fixing timber, masonry, metal or plaster, choosing the right fixing saves hassle on site and in the van.

At Always First 4 Fixings, we back every order with hands-on know-how and quality materials you can trust.

Need help choosing the right option for the job?
visit our website: alwaysfirst4fixings.co.uk

Address

Unit 8 Longacres Business Park, Stalmine
Poulton Le Fylde
FY60FF

Opening Hours

Monday 8:15am - 4:30pm
Tuesday 8:15am - 4:30pm
Wednesday 8:15am - 4:30pm
Thursday 8:15am - 4:30pm
Friday 8:15am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when Always First 4 Fixings posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Always First 4 Fixings:

Shortcuts

Share

Category