Guard Load Arrest

Guard Load Arrest British designers, manufacturers and suppliers of Load Arrestors, for protecting equipment that is suspended at height.

With over 30 years’ experience in load arrest applications. Whatever you do, make sure you

Suspended loads are used across almost every industry, but the risk behind them is often the same.From stage lighting an...
12/05/2026

Suspended loads are used across almost every industry, but the risk behind them is often the same.

From stage lighting and chandeliers to industrial doors, conveyor systems, chain hoists, galvanising plants, and general material handling, if something is lifted or suspended, there’s always a question of what happens if the primary support fails.

GUARD Load Arrest is designed for that exact situation.

It acts as a secondary safety measure, automatically arresting a falling load to help protect both equipment and people below.

This image series shows how GUARD Load Arrest is used across a range of real environments, each with different demands, but the same need for reliable protection.

Because when loads are suspended, safety shouldn’t depend on just one point of failure.

05/05/2026

Can only approved service centres service Guard Load Arrest units?

YES.

These are critical safety devices designed to protect suspended loads at height, so servicing isn’t something that should be done by just anyone. To ensure performance and safety, inspections and servicing should only be carried out by Globestock Safety certified service agents.

GUARD Load Arrest products must be serviced at least every 12 months (or sooner if used in harsh conditions), and always after the device has arrested a falling load.

To make this easier, we’ve added an interactive map on our website, so you can quickly find your nearest approved service agent.

Find your service agent here: https://globestocksafety.com/servicing-work-at-height-units-2/

28/04/2026

What happens if suspended equipment fails?

From stage lighting above audiences to production lines, industrial doors, chain hoists, and material handling systems, some loads simply can’t be allowed to fall.

That’s where GUARD Load Arrest comes in.

Designed to automatically arrest a falling load if the primary support fails, it helps protect both equipment and people below across a wide range of applications.

In this video, we show GUARD in action across:
• Stage & theatre lighting
• Chandeliers
• Industrial doors
• Conveyor lifts
• Galvanising plants
• Chain hoists and material handling

With self-retracting rope, shock-absorbing brake, and capacities from 150 kg (330 lbs) to 1,500 kg (3,300 lbs), it’s built for critical safety applications.

Because if a load is suspended, it needs protection.

21/04/2026

How far will a load actually fall before it’s stopped?

In this video, Stuart Raby explains an important but often misunderstood factor in load protection, stopping distance when using a GUARD Load Arrest system.

When equipment is suspended at height, it’s not just about whether it’s protected, but how it’s arrested in the event of a fall. Understanding stopping distance is critical to planning a safe setup and avoiding unexpected impact or damage.

GUARD Load Arrest devices are designed to protect both static and mobile loads using a high-strength, retractable rope and a shock-absorbing brake system, helping to control forces during arrest.

Key features include:
• Protection for loads from 150 kg (330 lbs) to 1,500 kg (3,300 lbs)
• Rope lengths up to 25 m (82 ft)
• Self-retracting, high-strength rope (galvanised or stainless steel options)
• Shock-absorbing brake to reduce impact forces
• Fall indicator for easy inspection
• Annual service requirement to maintain performance

Because when it comes to suspended loads, understanding the details, like stopping distance, makes all the difference.

Industrial roller doors are often not given due consideration, but when they fail, the risks can be serious. Guard Load ...
16/04/2026

Industrial roller doors are often not given due consideration, but when they fail, the risks can be serious.

Guard Load Arrestors offer a critical safety backup, helping prevent uncontrolled door falls that could endanger people, vehicles, and equipment.

Installed above the door, the system works seamlessly during normal operation. In the event of a mechanical failure, it activates instantly, arresting the fall and bringing the door to a controlled stop.

Available in capacities from 150 kg to 1,500 kg, with a shock-absorbing brake and high-strength retractable rope, it’s a cost-effective way to upgrade safety without replacing existing doors.

UK +44 01691 654 966
US +1 (517) 909-3331
[email protected]

14/04/2026

The GUARD Load Arrest range provides heavy-duty load control using a high-strength retractable rope system, capable of protecting both mobile and static loads in demanding industrial environments.

Available options cover a wide range of applications:
• Load capacities from 150 kg / 330 lbs up to 1,500 kg / 3,300 lbs
• Rope lengths up to 25 m / 82 ft
• Galvanised or stainless steel wire rope options
• Shock-absorbing braking system to control arrest forces
• Fall indicator lens for easy inspection and monitoring

From lighter duty installations through to heavy industrial applications, the GUARD Load Arrest range offers scalable protection to match site requirements, ensuring equipment is controlled, protected, and supported at height.

Selecting the right configuration is key to ensuring safe, reliable performance across different working environments.

09/04/2026

What happens if a roller shutter door fails?

Without a secondary safety system, a falling door can pose a serious risk to people, vehicles, and equipment.

Guard Load Arrestors from Globestock Safety are designed to act instantly in these situations, tracking door movement during normal use and activating to arrest the fall if the primary mechanism fails.

With capacities from 150 kg to 1,500 kg and a shock-absorbing braking system, they offer a practical, cost-effective way to enhance safety without the need for full door replacement.

Because when it comes to safety, prevention isn’t always enough, you need protection when things go wrong.

UK +44 01691 654 966
US +1 (517) 909-3331
[email protected]

07/04/2026

Stuart Raby explains why regular servicing of GUARD Load Arrestors is essential for safe and reliable performance in demanding environments.

GUARD Load Arrestors are designed to protect people and assets in the event of a fall, but like all critical safety equipment, they must be properly maintained to remain effective.

🔧 Key servicing reminders:

• Service at least every 12 months
• Service immediately after any load arrest event
• All servicing must be carried out by a Globestock-approved service agent only

To help customers stay compliant and up to date, our website provides an easy-to-use map to locate approved service agents in your area.

👉 Find your nearest service agent: https://globestocksafety.com/servicing-work-at-height-units-2/

Staying serviced means staying protected.

Don’t Miss Your Service GUARD Load Arrestors work hard in demanding environments, and regular servicing is key to keepin...
05/03/2026

Don’t Miss Your Service

GUARD Load Arrestors work hard in demanding environments, and regular servicing is key to keeping them performing as designed.

🔧 Remember:
• Service at least every 12 months
• Service immediately after a load arrest
• Servicing must be carried out by a Globestock-approved service agent only

To help you stay on track, our website makes it easy to locate approved service agents using a simple digital map.

Find your service agent here https://globestocksafety.com/servicing-work-at-height-units-2/

Staying compliant starts with staying serviced.

GUARD Load Arrestor – What’s the Arrest Distance? Q: What is the arrest distance for a GUARD Load Arrestor?A: The arrest...
03/03/2026

GUARD Load Arrestor – What’s the Arrest Distance?

Q: What is the arrest distance for a GUARD Load Arrestor?
A: The arrest distance (minimum clearance) for all GUARD Load Arrest products is 1 metre (3.3 ft).

This 1 m clearance includes:
✔️ Freefall distance
✔️ Deceleration distance
✔️ Built-in safety factor

In simple terms, you need at least 1 metre of vertical clearance for the device to safely arrest a falling load.
Additional clearance should be provided where possible. Understanding clearance requirements is essential when designing or reviewing your lifting and height safety systems.

If you're unsure whether your setup provides adequate clearance, our team is always happy to help.

UK +44 01691 654 966
US +1 (517) 909-3331
[email protected]

Servicing Made Easy Keeping your GUARD Load Arrestor serviced doesn’t need to be complicated. ✔️ Servicing is required a...
26/02/2026

Servicing Made Easy

Keeping your GUARD Load Arrestor serviced doesn’t need to be complicated.

✔️ Servicing is required at least every 12 months
✔️ Units must be serviced immediately after arresting a load
✔️ Only Globestock-approved service agents should carry out servicing

To make things simple, our website features a user-friendly service agent locator, including a digital map to help you quickly find a suitable approved service centre near you.

Visit here https://globestocksafety.com/servicing-work-at-height-units-2/

Address

Mile Oak Industrial Estate, Maesbury Road
Oswestry
SY108GA

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Guard Load Arrest posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Guard Load Arrest:

Shortcuts

Share

Category