International Woodworking Machinery

Call Directions Website

International Woodworking Machinery New Showroom & Demonstration Open in Newark Nottinghamshire with a display of the largest CNC Soukup Window Machinery plus a range of standard machines

Preparing timber doors and window sashes for ironmongery is traditionally one of the most labor-intensive tasks on the s...
16/10/2026

Preparing timber doors and window sashes for ironmongery is traditionally one of the most labor-intensive tasks on the shop floor.

Hand-routing lock cases, chiselling hinge recesses, and drilling handle passages manually eats up valuable bench time and introduces human error right before final assembly.

Soukup CNC Machining Centres streamline this process by integrating hardware preparation directly into the main cutting cycle.

Driven by an extensive library of UK hardware macros, the system automatically mills exact lock pockets, hinge seats, and trickle vents with sub-millimetre depth control.

Components come off the machine completely prepped, allowing ironmongery to drop straight in without trial-and-error trimming.

Eliminate benchwork delays and deliver hardware-ready joinery straight off the machine.

👉 Discover how Soukup CNCs handle complex hardware preparation.

🔗 https://bit.ly/4iqPn8a

When machining dense hardwoods or modified timbers like Accoya, finding the correct balance between spindle speed (RPM) ...
14/10/2026

When machining dense hardwoods or modified timbers like Accoya, finding the correct balance between spindle speed (RPM) and feed rate (m/min) is vital for tool longevity and component surface quality.

If the feed rate is too slow relative to the cutter RPM, the knives rub against the timber rather than taking a clean bite.

This friction generates extreme heat, burning the timber surface and rapidly dulling expensive carbide tooling.

Conversely, pushing timber through too quickly results in excessive chip load, leading to severe grain tear-out and out-of-square joints.

Modern automated machinery manages this balance dynamically, ensuring consistent chip load across every pass so your cutters stay sharp and your finished profiles remain perfectly square.

💡 Speak to IWM about optimising your machining parameters for dense timbers.

🌐 iwmachines.co.uk

13/10/2026

Relying on manual jigs and templates for hardware recesses and specialised joint detailing creates unnecessary shop floor friction.

Every time a jig is clamped, adjusted, or swapped out, valuable production minutes are lost, and slight alignment variations can slip into your finished components.

By utilizing dedicated joinery software logic, setup times are virtually eliminated.

Pre-programmed macros tell the machine exactly where to cut, at what depth, and at what speed - delivering total repeatability across every batch.

📖 Discover how software-driven machinery transforms joinery precision: https://bit.ly/4dc79sw

Many woodworking businesses view skip hire as an unavoidable cost of doing business.However, when you analyse what actua...
12/10/2026

Many woodworking businesses view skip hire as an unavoidable cost of doing business.

However, when you analyse what actually goes into those containers, you are largely paying to transport trapped air across the country.

The IWM Briquette Machine Range solves this issue by tackling waste density at the source.

Compacting loose dust and shavings into dense 50mm to 70mm briquettes dramatically alters your workshop logisitics.

A facility that currently requires multiple skip collections every month can consolidate that same volume into neat, palletised stacks.

This reduces collection frequency, frees up valuable yard or loading bay space, and eliminates the mess of wind-blown dust during container transfers.

Rethink your waste logistics from the factory floor outwards.

👉 Calculate your potential skip savings with the IWM technical team: https://bit.ly/3SlZr81

Thank you to Andrew J. for sharing his experience working with our team.We believe that investing in capital woodworking...
08/10/2026

Thank you to Andrew J. for sharing his experience working with our team.

We believe that investing in capital woodworking machinery should be straightforward.

No pressure sales, no artificial deadlines - just honest technical guidance, high-quality European equipment, and reliable aftercare support.

Whether you are upgrading a single machine or planning a complete shop floor line, our team is committed to delivering practical advice backed by over 50 years of industry experience.

🤝 Partner with a machinery supplier built on honest advice and technical support.

🌐 iwmachines.co.uk

In heavy timber machining, frame weight directly impacts surface finish and joint precision.When high-speed spindles cut...
06/10/2026

In heavy timber machining, frame weight directly impacts surface finish and joint precision.

When high-speed spindles cut dense hardwoods or engineered timber, significant rotational forces and cutting resistance are generated.

Lightweight sheet-metal machine frames absorb these forces by flexing, which causes micro-vibrations that transfer directly to the cutter bit.

This results in chatter marks, rough end-grain, and out-of-square joints.

Heavy-duty, cast-iron or heavy-gauge welded steel frames dampen these micro-vibrations completely.

This structural rigidity allows high-speed spindles to deliver a smooth, chisel-free, glue-ready finish straight off the cutter head, eliminating the need for bench-sanding or manual fitting.

👉 Talk to our engineering specialists about heavy-duty machinery construction.

🌐 iwmachines.co.uk

05/10/2026

Raw timber is one of the largest ongoing expenses for any joinery business.

Relying on manual tape measurements and hand-written cutting lists often leads to costly miscuts and excessive offcut waste.

Integrating an automated optimising cross-cut saw like the Soukup Crossline transforms your material preparation area.

The machine reads cut lists, detects timber length, and calculates the most efficient cutting pattern to maximise usable yield.

The result is lower raw material waste, perfectly square cuts, and clear component labeling before timber reaches your primary machining line.

👉 Explore automated material preparation solutions at IWM

🌐 iwmachines.co.uk

Programming a generic CNC router with standard CAD/CAM software often requires complex manual G-code adjustments for eve...
02/10/2026

Programming a generic CNC router with standard CAD/CAM software often requires complex manual G-code adjustments for every timber profile change.

Soukup CNC Machining Centres use dedicated joinery software engineered specifically for window, door, and frame manufacturing.

Instead of requiring manual coding for every tenon, trench, or hinge recess, the system uses parametric logic tailored to UK joinery standards.

Simply input your window dimensions and design selections, and the software automatically calculates the required tooling passes and spindle trajectories.

Eliminate software friction and run bespoke joinery components with industrial control.

👉 Explore Soukup CNC technology designed for UK window manufacturing.

🔗 https://bit.ly/4cUIUim

Advanced multi-axis CNC machinery cuts to sub-millimetre precision, but timber moisture content (MC) variations can easi...
30/09/2026

Advanced multi-axis CNC machinery cuts to sub-millimetre precision, but timber moisture content (MC) variations can easily compromise those tight tolerances.

When timber with inconsistent moisture levels enters a high-speed machining center, internal cell tension is released unevenly.

This leads to subtle warping, grain tear-out, and accelerated cutter wear.

In timber window and door manufacturing, even a minor expansion across a profile scribe can turn a glue-ready joint into a bench fitting headache.

Achieving true digital repeatability starts before the machine cycle begins: ensure your raw stock is properly kiln-dried and conditioned to your workshop’s environment.

💡 Learn how to build a fully repeatable joinery workflow with IWM.

🌐 iwmachines.co.uk

29/09/2026

In traditional joinery workshops, timber spends more time being moved, stacked, and re-clamped than it does inside a cutting envelope.

Transferring components between standalone tenoners, mortisers, and spindle moulders introduces cumulative setup variations and unnecessary labour handling.

By unifying machining operations into a continuous process, you eliminate transit downtime, protect component edges from handling damage, and keep your production flowing smoothly.

📖 Discover how process integration transforms joinery productivity

🌐 iwmachines.co.uk

Address

International Wood Machinery Ltd , Unit 20 , , Newark Business Park , , 3 Brunel Drive , Newark
Newark Upon Trent
NG242EG

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Telephone

447944108747

Website

Alerts

Be the first to know and let us send you an email when International Woodworking Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category