Crossen Engineering Ltd

Crossen Engineering Ltd Specialist in the Design & Manufacture of Metal formed & Plastic moulded components.

05/06/2026

Deep drawing is often misunderstood as a simple or limited process - but in reality, it’s a highly controlled and widely used manufacturing method.

Using our 630T Deep Draw Hydraulic Press, we’re able to form complex metal components efficiently while maintaining excellent repeatability and structural integrity.

Still not convinced? Take a look below. 👇

Another day, another mould tool complete. 👍This is a 4-cavity valve gate mould for a medical application, designed and m...
02/06/2026

Another day, another mould tool complete. 👍

This is a 4-cavity valve gate mould for a medical application, designed and machined entirely in-house by our team.

The valve gate system helps ensure precise melt flow control, clean gate marks and consistent quality across all cavities - essential when producing medical components with tight tolerances and high surface finish requirements.

📞 02890 448569
📩 [email protected]

28/05/2026

A good RFQ really does make life easier for everyone involved.

When everything’s clear from the start, the drawings, the requirements, the quantities, even the timelines, it saves a lot of back and forth later on and helps keep projects moving smoothly.

Whether it’s a brand-new tool or you’re bringing existing tooling into production, getting that early detail right makes a big difference once things are up and running.

Reach out to discuss the next steps:

📞 02890 448569
📩 [email protected]

Large mould insert change? Challenge accepted. 💪Instead of changing the whole tool, we just swap out the inserts, a simp...
21/05/2026

Large mould insert change? Challenge accepted. 💪

Instead of changing the whole tool, we just swap out the inserts, a simple, practical approach that keeps downtime down and helps us move quickly between prototype work and short-run production.

It also means we can stay flexible and adapt when needed, without ever compromising on precision - even with larger, more complex tooling like this one.

19/05/2026

Injection moulding is at the heart of so many modern manufacturing programmes - but getting it right takes more than just machines.

We don’t just run parts; we support the full process from the very start. That includes design input, mould flow analysis, in-house tooling and production through to finishing.

It means we can take a project from concept right through to manufactured, production-ready components without the gaps that slow things down.

📞 02890 448569
📩 [email protected]

15/05/2026

For Climate Change Day, we’re taking a moment to think about the role engineering plays in supporting a more sustainable future. 🌍

As a company, we're particularly proud to work with the renewable energy sector, helping to manufacture components used in airflow products, ventilation, heat recovery, solar PV systems and so much more!

We can provide early design input and material selection advice to help shape your ideas. From there, we take care of the full manufacturing process to deliver reliable plastic moulded and metal formed parts used in solar energy systems, electric vehicle batteries and other low-carbon technologies.

Here’s a glimpse at some of the projects we've taken on. ⬇️

07/05/2026

Tooling transfers are a huge part of injection moulding - but they’re rarely as simple as moving a mould from A to B!

When a tool changes hands, there’s a lot to think about. You need to make sure production stays consistent, reliable and cost-effective, and that doesn’t happen by chance.

That’s where we come in! We focus on getting your production back up and running properly. We inspect incoming tools, assess their condition and spot any risks or tweaks needed before restart.

So, why transfer your tooling to us? Let’s take a look.👇

05/05/2026

Design for Manufacturing (DFM) isn’t just a step we tick off at Crossen Engineering - it’s how every injection moulding project starts. 👍

Before anything’s tooled or produced, we’re already thinking about how it’ll actually be made on the shop floor.

That means designing tooling to be efficient, reliable and cost-effective in production, while also simulating both plastic and metal components early for customers.

It’s a simple approach, but it makes a big impact, helping catch issues early, refine designs, and avoid costly problems later down the line.

Starting the week off strong with a new aluminium tooling project. 💪This one’s a great example of the kind of work we’re...
27/04/2026

Starting the week off strong with a new aluminium tooling project. 💪

This one’s a great example of the kind of work we’re heavily involved in, taking a component from early design discussions right through to fully tooled, production-ready parts.

A lot of the value is in those early stages. Working through the design for manufacture, refining details for tooling and making sure everything is set up for a smooth and consistent production run.

📞 02890 448569
📩 [email protected]

Construction projects run smoother when the parts you rely on actually do their job. 👷That’s why we provide pressed solu...
25/04/2026

Construction projects run smoother when the parts you rely on actually do their job. 👷

That’s why we provide pressed solutions built for the real challenges on site. From brackets supporting PV solar panels to fixing brackets in HVAC systems, our components are designed to handle tough environments, fit perfectly first time and make installation quicker and easier.

Address

Maryland Industrial Estate, Ballygowan Road
Moneyrea
BT236BL

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 2:30pm

Telephone

+442890448569

Website

Alerts

Be the first to know and let us send you an email when Crossen Engineering Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Crossen Engineering Ltd:

Shortcuts

Share

Category