PSF Mobile Welding

PSF Mobile Welding Mobile welding & fabrication
Line boring & Bore welding
Coded welder in various procedures

Big post, lots of photos - Here’s some of the jobs I’ve been up to! Pezzaioli trailer had cracks on the ramp. Re welded ...
20/05/2026

Big post, lots of photos - Here’s some of the jobs I’ve been up to!

Pezzaioli trailer had cracks on the ramp. Re welded and gussets added

Aluminium cattle trailer - door latch bracket welded back on

Aluminium cement tank - few cracks, welded and plated over

Little handrail fabricated and welded on site

Agri trailer I’ve been making sides, head board and tail door for as and when I get time

Been down in Belfast at the construction site for the new cruise ship terminal

Quick hitch on this 40t Volvo had some cracks - gouged out and welded out with flux core

Lastly big heavy duty table for stone mason 👍🏼🤙🏼

For all enquiries 07955 907986

Here’s a job I’ve been at recently. x3 sets of barn doors and x2 sliding doors.Everything for these was made on site.All...
19/04/2026

Here’s a job I’ve been at recently. x3 sets of barn doors and x2 sliding doors.

Everything for these was made on site.
All the barn doors are made with adjustable eye bolts. & Locking bars top and bottom

For all enquiries 07955 907986

Floor skins gouged out and new Hardox skins welded into this Volvo 150c shovel. Press man done a good job they fitted pe...
01/04/2026

Floor skins gouged out and new Hardox skins welded into this Volvo 150c shovel. Press man done a good job they fitted perfect without having to do any messing about with a porta power 👍🏼 Also done some hardfacing on the side cutters and on the front weld at the cutting edge.

For all enquiries - 07955 907986

Symons 4ft cone I’ve worked on recently, Mainframe liners cut out and new ones welded in, plus some work done in the chu...
01/04/2026

Symons 4ft cone I’ve worked on recently, Mainframe liners cut out and new ones welded in, plus some work done in the chute below.

These were QMS parts and didn’t quite fit exact, so all three liners had to be trimmed a bit.

Not to bad of a job, plenty of room in around the mainframe on this cone made it a bit easier compared to some other cones 👍🏼

For all enquiries - 07955 907986

Here’s something a little different for me, this pipe handrail I’ve finished today for a lovely property. Fabricated thi...
01/04/2026

Here’s something a little different for me, this pipe handrail I’ve finished today for a lovely property.

Fabricated this all on site, took it back to workshop to be welded and painted, installed today and it’s turned out really well 👍🏼

For all enquiries - 07955 907986

February photo dump, good variety of site work lately 👍🏼 For all enquiries - 07955 907986 All kinds of engineering works...
07/03/2026

February photo dump, good variety of site work lately 👍🏼

For all enquiries - 07955 907986

All kinds of engineering works took on

First post of the year. Few bits I was at this month 👍🏼 We had an ‘A’ frame go onto a fencing attachment Small amount of...
01/02/2026

First post of the year. Few bits I was at this month 👍🏼

We had an ‘A’ frame go onto a fencing attachment

Small amount of brackets made for a steel fence job in cookstown

Various aluminium parts

Hyster forklift headstock, four of the bearing mounts had broken off.

Piling rig had various cracks on the chassis. This was done alongside another fitter who was changing out the slew ring on the same day

Back at the stairs I fitted before Christmas. Handrails fitted onto platform along with the chequered plate floor 👍🏼👍🏼

Give me a ring on:
☎️ 07955 907986

All kinds of various welding and engineering jobs took on.

That’s a wrap on my end. 2025 the year i decided to push this welding gig full time. Very thankful for all my customers ...
23/12/2025

That’s a wrap on my end. 2025 the year i decided to push this welding gig full time. Very thankful for all my customers and suppliers. Looking forward to the new year.

Here’s some of the last few bits I’ve been up to, see you all on the flip side 🤙🏼

☎️ 07955 907986

Broderick Engineering Cubi Clean scraper. This one has been “Farmer fixed” about 20 times 🤣🤦‍♂️ I’ve changed the guide r...
05/12/2025

Broderick Engineering Cubi Clean scraper. This one has been “Farmer fixed” about 20 times 🤣🤦‍♂️ I’ve changed the guide roller with a piece of cast nylon that can be flipped to get double the amount of ware, and relatively cheap to replace.

Upped the material thickness from 10-12mm. Used the air arc to remove all that 💩💩 Welded out with flux core 🤙🏼

☎️ 07955 907986

Some jobs from last week. 180H Volvo shovel - side ware plates gouged off and new plates cut and welded on. Installed a ...
25/11/2025

Some jobs from last week.

180H Volvo shovel - side ware plates gouged off and new plates cut and welded on.

Installed a new Morris crush. Bit of modification for scoop to work along side it. RSJ was also plated to increase its lifespan.

And lastly a confectionery cart heading to Antrim castle gardens. This got new sinks installed and a little lift on shelf fabricated with aluminium top. Customer got it galvanised 👌🏼🤙🏼

Good variety of work 👍🏼

☎️ 07955 907986

Got this Kuhn straw blower boxed off today. Gear and other plates so badly wore out chute wouldn’t turn. BTM engineering...
25/11/2025

Got this Kuhn straw blower boxed off today. Gear and other plates so badly wore out chute wouldn’t turn.

BTM engineering Done a great job laser cutting new parts for this job, especially on the ring gear, a plasma cutter couldn’t get such tight and accurate tolerances 🙌🏼

For all mobile welding and fabrication work
☎️ 07955 907986

Address

6 Rosgarran Road
Mid Ulster
BT455EP

Telephone

+447955907986

Website

Alerts

Be the first to know and let us send you an email when PSF Mobile Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PSF Mobile Welding:

Shortcuts

Share

Category