Ambrose wood and son ltd. Engineering & Fabrication

Ambrose wood and son ltd. Engineering & Fabrication Long established welding engineers specialising in bespoke metal fabrications, hgv chassis repairs
(1)

Probably the worst fuel tank nightmare exposed 😅👨‍🏭Tank was expected to be dirty but this was a new level Back cut out a...
13/06/2026

Probably the worst fuel tank nightmare exposed 😅👨‍🏭
Tank was expected to be dirty but this was a new level
Back cut out and cleaned out as good as possible
Patch rolled and welded up

Structural steel bracket fabricated to carry steel beam purlin 👨‍🏭Bolted to cranked glavanised toe beam, ready to bolt t...
11/06/2026

Structural steel bracket fabricated to carry steel beam purlin 👨‍🏭
Bolted to cranked glavanised toe beam, ready to bolt to end plate on beam
On show through glass windows
Blasted and primed 👌

ERF A series steel bumper fabricated to original pattern with a couple of customized bits Step plates and spot light bra...
08/06/2026

ERF A series steel bumper fabricated to original pattern with a couple of customized bits
Step plates and spot light brackets 👌

Aluminium repairs to STAS tipping trailerBit of a challenge one 👨‍🏭Damaged rear side section cut out and braced Inner 6m...
03/06/2026

Aluminium repairs to STAS tipping trailer
Bit of a challenge one 👨‍🏭

Damaged rear side section cut out and braced
Inner 6mm repair section folded and placed in
Outer repair panel folded and welded in place
Curved extrusion repaired
Easy sheet bracket replaced
Cracks round tipping bar plated and welded

Another side tipping loaded shovel bucket repaired 👨‍🏭New cutting edge and bottom plate New end and wear strips New pin...
01/06/2026

Another side tipping loaded shovel bucket repaired 👨‍🏭
New cutting edge and bottom plate
New end and wear strips
New pin and bearings
All fully welded up
Quality attachments welding repairs and modifications 👌

New underun bar assembly can smarten any old trailer up 👌Bent and rotten section hacked off and new box added with tow p...
27/05/2026

New underun bar assembly can smarten any old trailer up 👌
Bent and rotten section hacked off and new box added with tow points

Alterations to aluminium hydraulic tank for Bradley Allen transport 👨‍🏭Section cut out where adjacent bolts had rubbed t...
27/05/2026

Alterations to aluminium hydraulic tank for Bradley Allen transport 👨‍🏭
Section cut out where adjacent bolts had rubbed through, folded piece pressed and let in 👌

Ram mount repairs on bin lorry sweep plate assembly for TLC Stockport 👨‍🏭Torn section braced and new piece profiled out ...
21/05/2026

Ram mount repairs on bin lorry sweep plate assembly for TLC Stockport 👨‍🏭
Torn section braced and new piece profiled out
Alignment pins machined and set up
New pressed section made
All prepped and fully welded up
Seized pins lanced out
New machined block
Grease tube repaired 👌

There’s a lot more to jobs than meets the eye usually making attachments and pullers to remove stubborn parts 👨‍🏭Tried w...
19/05/2026

There’s a lot more to jobs than meets the eye

usually making attachments and pullers to remove stubborn parts 👨‍🏭
Tried with a proper hydraulic puller ❌
Purpose puller knocked up ✅

Body repairs to Boweld steel body in the usual places for Pivotal Plant Hire👨‍🏭Cracked front bulkhead bottom welded and ...
12/05/2026

Body repairs to Boweld steel body in the usual places for Pivotal Plant Hire👨‍🏭
Cracked front bulkhead bottom welded and plated
Inside cut out and reinforced
Rear subframe cracks ground out and plated
Couple of body blocks replaced 👌👌

Address

Ovenhouse Farm , Henshall Road , Bollington, Nr Macclesfield
Macclesfield
SK105DN

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Telephone

01625573291

Website

Alerts

Be the first to know and let us send you an email when Ambrose wood and son ltd. Engineering & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ambrose wood and son ltd. Engineering & Fabrication:

Shortcuts

Share

Category