02/09/2026
What is a 2 Stage DPF Flush & Clean? 🚗💨
If your DPF is struggling with built-up soot, carbon and ash, a 2 stage clean could help get things moving again.
Unlike a standard DPF clean, our 2 stage process is designed to target both soot/carbon AND ash, making it particularly useful for higher-mileage vehicles.
🔧 Stage 1 – Deep Clean
We introduce our DPF cleaning solution through an appropriate entry point, such as a sensor or pressure hose. The vehicle is then run for a few minutes before the solution is left to work for around 20 minutes, helping break down the deposits inside the DPF.
💦 Stage 2 – Flush
The flushing solution is then pushed through the DPF with the engine running, helping remove as much loosened debris as possible.
Once complete, everything is put back together, fault codes can be cleared with your permission and the vehicle can be checked to make sure it’s operating correctly.
The benefits?
✅ Helps remove built-up soot, carbon & ash
✅ Can improve DPF flow
✅ Can help restore performance and power
✅ Can help prevent further DPF-related issues
✅ Potentially saves you the cost of replacing the DPF
⚠️ A clean won’t repair a DPF or component that is physically damaged or faulty — but if it’s blocked or restricted by deposits, cleaning could be the solution.
📩 Got a DPF problem? Drop us a message and we’ll be happy to help.