Impact Technical Services

16/03/2020

An engineering solution firm recently contacted Impact looking for help on improving their LEV systems which served their ABB robot cells and the rework jigs, this is because they were ineffective at controlling the airborne fumes produced during the welding processes.

The system providing extraction for the jigs was replaced by GT extraction walls which had been sized to provide excellent capture efficiency of the welding fumes across the jig when set in both the horizontal and vertical position.
The two jigs within the cell each had extraction canopies installed above them, the canopies measured 1600mm by 1000mm. This helps to ensure the welding fumes are controlled and the workplace is kept safe.

If you require any help regarding dust and fume extraction then contact the experts at Impact:
Call – 0116 2448855
Email – [email protected]

11/03/2020

A world leading engineering company recently contacted Impact to organise a site visit, the purpose of the site visit was to assess ventilation requirements to control the solvent vapours produced during the application of bonding substances to metal parts within an existing enclosure.

Impact Technical Services installed a new ducted system to the top of the enclosure using galvanised spiral wound ducting.

A new 1.1kW fan with spark minimising features was installed upon the false ceiling above the bonding area complete with new external discharge stack & high velocity cowl to disperse the extracted solvent vapours safely to atmosphere above the roof line of the building.

The new system was installed & commissioned to meet requirements of HSG 258 Controlling Airborne Contaminants at Work.

If you require any help regarding dust and fume extraction then contact the experts at Impact:
Call – 0116 2448855
Email – [email protected]

02/03/2020

A company who specialise in propulsion systems recently asked for Impact to visit their site and inspect the cleaning process within the facility. During the site visit, it was discovered that acetone vapours were being released during the cleaning process.

To overcome this issue and protect employees from the harmful airborne contaminants, Impact’s team of experts installed a GT1000/B extraction hood. A VT1000-C2 0.75kW fan was also installed to provide the air movement required for the system to work efficiently.

If you require any help regarding dust and fume extraction then contact the experts at Impact:
Call – 0116 2448855
Email – [email protected]

26/02/2020

A customer recently contacted Impact and requested a site visit to their rifle range. During the site visit, it was established that the ventilation system they were using was inadequate. Therefore, it wasn’t controlling lead fume and other particles.

Impacts engineers removed the existing intake and extraction fans. To replace the extraction fans which had been removed, two KD400 inline duct fans were installed. Along side this, new air extraction and air intake ducting systems were also installed.

If you require any help regarding dust and fume extraction then contact the experts at Impact:
Call – 0116 2448855
Email – [email protected]

21/02/2020

A company who specialises in van racking recently contacted Impact looking for a solution to help extract welding fumes. The fumes were being produced when MIG welding was being carried out on mild steel parts, the process was taking place on an individual workbench and occasionally just away from it.

To help protect employees, they requested a four-metre flexible articulating extraction arm. For this solution an RFF extraction arm was installed as it provided them with versatility they required.

If you require a dust or fume solution then contact the extraction experts at Impact Technical Services:
Call – 0116 2448855
Email – [email protected]

17/02/2020

A customer recently purchased three telescopic extraction arms, this is due to their ability to efficiently extract welding smoke, soldering fumes, other light gases and dust.

If you require an extraction solution then contact the extraction experts at Impact:
Call – 01162448855
Email – [email protected]

05/02/2020

If you are exposed to diesel fumes at work, the chances of you developing lung or bladder cancer are significantly increased.

By law, employers should provide adequate control of diesel fumes in the workplace. The IOSH 'No Time To Lose' campaign, recommends the installation of a local exhaust ventilation system as an extremely effective method of controlling exposure.

For help regarding diesel fume control, contact the extraction experts at Impact Technical Services:
Call - 01162448855
Email - [email protected]

03/02/2020

Did you know that 15 people die a week from lung cancer caused by silica dust?

Silica dust is produced during many common construction tasks which use materials containing silica. Sandstone, concrete, slate, limestone and marble are just some of the materials which contain silica.

No Time To Lose, a campaign ran by the IOSH, suggest that the most effective method of controlling silica dust is through engineering controls such as a local exhaust ventilation (LEV) system. Read more on the subject of silica dust and how to protect employee's here - https://bit.ly/38LIszF

If you have any questions regarding the control of airborne hazards, contact the LEV and extraction experts at Impact Technical Services:
Call - 0116 2448855
Email - [email protected]

31/01/2020

We are exhibiting at MACH 2020! Come and visit our stand, 6-570, to see the latest extraction solutions in action. Our experienced staff on the stand will be more than willing to answer any questions.

Learn more about MACH 2020 here ahead of your visit - https://www.machexhibition.com/visit #/

If you have any questions regarding dust and fume extraction contact the experts at Impact Technical Services:
Call - 01162448855
Email - [email protected]

29/01/2020

One of the most effective methods of controlling welding fumes is through the installation and use of a local exhaust ventilation (LEV) system, in this case it would be on-torch extraction.

Watch the video below (https://bit.ly/37yWnc1) to see just how effective on-torch extraction is at protecting welders from carcinogenic fumes.

If you require a LEV system or have any questions regarding dust and fume extraction, contact the experts at Impact Technical Services:
Call - 0116 2448855
Email - [email protected]

Effectiveness of on-torch extraction demonstrated by showing the on-torch extraction switched on and off, while welding.

22/01/2020

Regular exposure to diesel fumes can increase the risk of lung cancer. The IARC said that people regularly exposed to diesel exhaust fumes at work can be up to 40% more likely to develop lung cancer.

If you require any help regarding the control of exhaust fumes, contact the extraction experts at Impact Technical Services: Call - 01162448855 Email - [email protected]

25/12/2019

We wish everyone a very Merry Christmas and a Happy New Year, see you in 2020!