29/05/2020
A new series of Calpeda swimming pool pumps have just been introduced to the Calpeda NMP range
Calpeda pumps UK are one of a few pump manufacturers still producing commercial swimming pool pumps in both cast iron and bronze. Using such materials provides a far better mechanical stability in larger pools, found in leisure centres and hotels especially when compared to larger plastic pumps.
The Bronze pumps are especially suitable for sea water or salt water chlorinated pools.The new models that have been introduced to this range are specific to the NMP65 series and provide flows unto 120 cubic metres of water per hour with heads ranging up to 26 metres (2.6 bar). these models have new improved impeller designs which radically improve efficiencies, thus reducing the need for larger electric motors.
The NMP range are a self priming pump fitted with a built in strainer with 3mm diameter holes.
They are capable of pumping water up to 60 degrees C and can operate in ambient temperatures up to 40 degrees C. The motors are continuously rated and the maximum working pressure is 6.0 bar.
Special features are also available on request, such as 60Hz, IP55, special mechanical seals and higher liquid and ambient temperatures.
Also available are the MPC MPCM range for domestic pools and SPA pumps for whirlpools.
Check out our blog for pump models and further information on the pump types we can supply :
https://www.ipmpumps.co.uk/calpeda-new-nmp-swimming-pool-pumps/
