East Yorkshire Fabrication and engineering

17/02/2026

Taking bookings for the end of February onwards.

23/01/2026

After having to put the fitting back by a week the fencing is now fitted.
Massive thanks to D-Faz Builds for assisting with this job putting the sleepers in, always nice to work with other local small businesses.

09/01/2026

First job of the year ready for powder coating and fitting next week, we still have availability for late January onwards.
Drop us a message for a free quote on any gates or fencing and general fabrication work.

10/11/2025

Twin leaf self closing safety gates fitted and working spot on to keep Tomas Bernotas and his team safe down at Blackburn Hydroponics

If you need any fabrication work no matter where you are in the country give East Yorkshire Fabrication and engineering a message 💪💪

10/11/2025

Self closing twin leaf safety gates fitted and working spot on to keep Tomas and his team safe down at Blackburn Hydroponics

If you need any fabrication work no matter where you are in the country give East Yorkshire Fabrication and engineering a message 💪💪

14/10/2025

Another job completed this week, slightly different to the normal fencing we do but we do enjoy making your vision come to life

14/10/2025

07/09/2025

Now booked up until the end of September, taking bookings for October onwards now.

20/08/2025

We have availability for bookings from the 25th onwards.
drop us a message to book in for a free no obligation quote for any of your fabrication needs.

16/08/2025

Gate was too wide after the rear of the property was extended, customer didn’t want to replace the gate so gave them the option to resize the existing one to suit the gap, this job took around an hour to complete and customer was supplied with a Zinc based paint can at their request to touch up the gate now its been done, this option was given again to save the customer money on labour for us doing that part for them which they were more than capable and happy to do themselves to save costs.
Doing this saved the customer around £250 in total compared to having a replacement gate fabricated.

Drop us a message for any fabrication needs big or small we are happy to do them all 😊😊

28/07/2025

Frame had collapsed on this fryer unit in a mobile fish and chip van.
Mainly due to the fact the original was made with 1mm wall thickness mild steel box section (the stuff you find cheap metal beds made out of)

Now made fully of stainless steel box sections with minimum of 3mm side wall thickness, also now with it being stainless steel it won’t rust like the original one did.