Usher Engineering

17/08/2026

Stainless steel racking fabricated for a bakery to transport bread to their customers, made to their requirements 2 tray deep with a easy fit partition.

16/07/2026

Volvo B230ft 8v cylinder heads often have corrosion pits which can get close to the compression seal area, after a clean up in the nearly 8mm deep holes, tig welded and a skim the head is looking much better!
www.usherengineering.co.uk

13/07/2026

Plenty of aluminium fabrication going on in the workshop, Peugeot 309 race fuel tank, volvo 940 turbo plenum, zetec manifolds and a 8v vauxhall manifold to take a weber....
www.usherengineering.co.uk

12/11/2024

Not posted in quite a while, time fly! its been a very busy year....a few of the smaller jobs we done

17/01/2024

Mk1 Es**rt we done last year, new part floor section, enlarged tunnel, new inner sills and a full rollcage, this is being built to classic rally spec www.usherengineering.co.uk

14/01/2024

Good day yesterday drifting at the NADT kings lynn, oil leak fixed after we rebuilt the turbo with a new rebuild kit and some slight modifications to fueling and ignition mapping, the 940 was faultless allday, still modifying and improving this brick to slide

24/12/2023

Merry Christmas and Happy New year

10/12/2023

Lots going on lately especially on engine performance and turbo builds, this is another volvo B230 turbo plenum with slightly larger ports for more generated boost this one has 44mm ports so port matching is required along with porting the head and a longer duration cam

18/10/2023

https://usherengineering.co.uk/ecom/?product=volvo-940-turbo-inlet-manifold

Fabricated inlet plenum manifold fabricated in aluminium and tig welded, For larger turbo builds with B230 and B200 FT/FK Redblock engines