Redford Motorsport Limited

Redford Motorsport Limited Modified Car Mechanic
Structural Steal Fabricator/Welder

Don't mind the colour. But all those gaps are looking much better. Still waiting on a price to wrap the front end. Hopef...
08/07/2025

Don't mind the colour. But all those gaps are looking much better. Still waiting on a price to wrap the front end. Hopefully the MGC Brackets will arrive soon and I can make a start on the undertray. Unsure of whether to use marine ply or Ali.

Right, so I've decided I'm sick of the electrical issues, the damage and the track look interior without a roll cage. So...
05/07/2025

Right, so I've decided I'm sick of the electrical issues, the damage and the track look interior without a roll cage. So it's time to see if I can run the mk2 and mk3 loom alongside each other and get the car working as it was intended too. Add some comforts back in. I've put the original bonnet back on and picking up and new front bumper and splitter tonight. Replaced all the broken speed clips on the roof baf covers and replaced the windscreen rubbers as the old ones had been on and off so many times they were abit flappy in the wind. Front and rear lights have been upgraded to titanium ones. My original lights had 8year old wrap on and have generally seen better day.
Sometimes the cheapest solution is to buy another car. Works out cheaper than buying loads from a breaker.

17/02/2025

So the apprentice has finally pulled her finger out, she's got her project running.

She carried out the following:
- Researched & Learnt the Aftermarket Immobilizer System.
- Fuel Drain and New Fuel.
- New Fuel Filter
- New NGK Spark Plugs.
- Fitted a New Battery.

This little car needs so much work to become road legal again let alone the show car it's planned to be but I'm sure little bits of her time often is what she needs to see it there in the near future.

Up next:
- New Aftermarket Air Filter
- Oil & Filter
- Cambelt & Waterpump
- Coolant Change
- Front Discs & Pads
- Send Front Brake Calipers Off For Rebuild
- Braided Brake Lines
- Brake Fluid Change

The list goes on but one thing at a time :)

Nicole came to us with a starting issue, first thing every morning. Upon inspection we found a problem with her glow plu...
13/02/2025

Nicole came to us with a starting issue, first thing every morning. Upon inspection we found a problem with her glow plugs. Whilst we was at it we did a full Service. Take a look at that air filter 😅👀

We carried out the following work:
▪ 5w40 Engine Oil
▪ Oil Filter
▪ Air Filter
▪ 4x Glow Plugs

For more information please contact us on:
☎️: 07902814193
✉️: [email protected]

10/02/2025

February Labour Price Cuts
£20 per hour.
Please message to get yourself booked in.
Garages now are charging in excess of £50+ per hour. Grab yourself a bargain.

Tommy's daily Kia Ceed was in for a grinding noise coming from the drivers wheel. Upon inspection we found a few issue:W...
10/10/2024

Tommy's daily Kia Ceed was in for a grinding noise coming from the drivers wheel. Upon inspection we found a few issue:

We carried out the following work:
▪ O/S Lower Arm Ball Joint
▪ O/S Anti-Roll Bar Drop Link
▪ O/S Drive Shaft
▪ 75w90 Gear Box Oil

For more information please contact us on:
☎️: 07902814193
✉️: [email protected]

The Apprentice wanted her own little project car. So here it is. A list of problems. Off the road for 12years. Doesn't s...
08/01/2024

The Apprentice wanted her own little project car. So here it is. A list of problems. Off the road for 12years. Doesn't start. Guess we will look forward to seeing how she gets on with this one.

Christ, what can I say? Too busy working not enough updating 😅
08/01/2024

Christ, what can I say? Too busy working not enough updating 😅

Today was a very long days work on our own project. The mission was to remove all the panel bond and sound deadening fro...
07/05/2023

Today was a very long days work on our own project. The mission was to remove all the panel bond and sound deadening from the BTCC Rep. This should achieve about 20kg of weight reduction. I used a number of methods but found that the wire wheel on the grinder was the easiest. It did make it a messy job though. If this is something your thinking of having done but don't want to spend a whole day scrambling around on your knees then give us a call for quote.

Spent some time on the mk3 Focus BTCC Rep today. Almost returned to a rolling shell, couple more bits to remove before r...
06/05/2023

Spent some time on the mk3 Focus BTCC Rep today. Almost returned to a rolling shell, couple more bits to remove before removing all the sound deadening. This used to be a 1l ecoboost but it will not be returning as one.

Address

5
Herne Bay
CT66HU

Opening Hours

Monday 6am - 12am
Tuesday 6am - 12am
Wednesday 6am - 12am
Thursday 6am - 12am
Friday 6am - 10pm
Saturday 7am - 5pm

Telephone

+447902814193

Website

Alerts

Be the first to know and let us send you an email when Redford Motorsport Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Redford Motorsport Limited:

Shortcuts

Share

Category