TW Engineering

TW Engineering Mechanical maintenance/repair services.

New winter workhorse. Good condition Mk 1 harder to find now. 95% original. Had been stood for some time. Carbs cleaned ...
03/10/2025

New winter workhorse. Good condition Mk 1 harder to find now. 95% original. Had been stood for some time. Carbs cleaned fresh fuel. Carbs wildly out of balance so all set nicely now.

Fitted a replacement turbo on a transit today. Local small business needing a quick turn around.
19/09/2025

Fitted a replacement turbo on a transit today. Local small business needing a quick turn around.

This is the important bit. The modified linkage,now cut to fit with new bearings and bushes
16/09/2025

This is the important bit. The modified linkage,now cut to fit with new bearings and bushes

Next steps on the track bike. Rising rate linkage cut to fit once old bearings removed. Basic assembly to check it all l...
13/09/2025

Next steps on the track bike. Rising rate linkage cut to fit once old bearings removed. Basic assembly to check it all lines up. Used a shock from aYZF. 1000 in the end. Now to make all the bushes and bearings fit. Once that’s done will clean / paint al parts

Latest addition which will increase my scope for making one off components.
29/08/2025

Latest addition which will increase my scope for making one off components.

Fitted the R 6 swinging arm to the YZF track frame. The bushes I machined work perfectly.
27/08/2025

Fitted the R 6 swinging arm to the YZF track frame. The bushes I machined work perfectly.

Fuelling issues sorted. Serviced the injectors stripped and cleaned the fuel pump. Fitted new filter which is housed in ...
22/08/2025

Fuelling issues sorted. Serviced the injectors stripped and cleaned the fuel pump. Fitted new filter which is housed in the pump. New fuel hoses. Now with the new exhaust system runs very smooth with full power delivery.
Also said goodbye to the YZF. Bit the bullet Because I probably wouldn’t have got round to recommissioning it.

New exhaust for the ‘Busa but she’s developed some fuelling issues.
05/08/2025

New exhaust for the ‘Busa but she’s developed some fuelling issues.

Sorry not posted for ages again. These are bushes I turned to adapt the R6 swing arm to fit the YZF frame on the track d...
22/07/2025

Sorry not posted for ages again. These are bushes I turned to adapt the R6 swing arm to fit the YZF frame on the track day bike.

Address

Hastings
TN355PD

Website

Alerts

Be the first to know and let us send you an email when TW Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TW Engineering:

Share