Aim Engineering

15/06/2026

A busy morning helping our friends at Fire & Flow Sauna get ready for a busy weekend of events. 🔥

We fitted a new starter motor to keep them reliable and ready for the road, along with completing the towbar, towbar wiring installation and carrying out full testing to make sure everything was working exactly as it should.

Of course, no job would be complete without a visit from the supervisor for the day... 🐱 The van inspector was out with us making sure standards were maintained (mostly by demanding attention and finding the comfiest spot in the van!).

Need repairs, servicing, welding, fabrication, electrical work, or breakdown assistance? Get in touch.

📞 07777 115602
📧 [email protected]

15/06/2026

Now £4000

🐴 DAF 45 130 Turbo 7.5T Horsebox For Sale 🐴

1994 DAF 45 130 Turbo powered by the reliable Cummins 5.9 engine.

✅ MOT until September
✅ Approx. 212,000kilometres
✅ Good tyres all round
✅ Floor and chassis in good condition
✅ Ramp repaired
✅ Double sleeper platform above cab
✅ Kitchenette area with sink and twin-burner gas hob
✅ Night heater fitted and working
✅ Plenty of storage space and cupboards
✅ Two horse area to rear with access from living area

Full underside inspection carried out, brakes checked and adjusted
all airlines etc checked and any damaged lines or fittings have been replaced
Oil and filter changed, fuel pump timing adjusted
Rear ramp has had extensive repairs while in the workshop, both sides have had repairs and strengthening to the main ramp bodywork as well as the hinges too.

A solid, honest horsebox that has been prepared for sale and is ready to go. Starts, runs and drives well. Ready to jump in and use straight away!

Can provide fully undersealed as well for additional cost.

💷 £4000

📞 07777 115602
📧 [email protected]

Located in Harleston Norfolk

Viewing welcome.

13/06/2026

📞 Messaged at 10:30pm on Friday night regarding a worrying clicking noise from a Renault Kangoo whilst driving.

The customer was down from Yorkshire visiting family and needed the van back on the road by midday Saturday. After trying several garages without success due to the short timeframe, they gave us a call.

At Aim Engineering, we pride ourselves on getting customers back up and running as quickly as possible and taking on the jobs that others simply can't fit in.

Luckily, the customer was staying locally, so by lunchtime we had diagnosed the fault as one split CV joint with dirt ingress and another with a failed joint. Two new driveshafts were sourced, supplied and fitted, getting the van back on the road with time to spare.

No cancelled plans, no recovery truck, no extended stay away from home – just a fast diagnosis, quick turnaround and another happy customer back on their way. ✅

Need help with breakdowns, repairs or fault finding? Get in touch!

📞 07777 115602
📧 [email protected]

12/06/2026

Ending tomorrow....

12/06/2026

🚨 INVESTING TO KEEP YOU MOVING 🚨

We've recently added even more equipment allowing us to take on a wider range of jobs and complete more repairs on-site, reducing downtime and getting our customers back up and running faster.

⚡ New MIG & TIG AC/DC welding capability
⚡ New JEI mag drill for precision drilling and fabrication
⚡ More on-site repairs and modifications
⚡ Faster turnaround times
⚡ Less downtime and transport costs

Massive thanks to Mellis Welding Supplies Ltd.

We're also continuing to expand our specialist repair services, including:

🔩 Snapped bolt and stud extraction
🔩 Seized bolt removal
🔩 Broken drill and tap removal
🔩 Seized injector removal
🔩 Broken glow plug extraction
🔩 Thread repairs and inserts
🔩 Precision drilling and repair work

From agricultural machinery and plant equipment to trailers, commercial vehicles and industrial machinery, we have the tools, experience and determination to tackle the jobs that others often walk away from.

When a simple broken bolt or seized injector can turn into a major repair bill, having the right equipment and knowledge can save both time and money.

Need welding, fabrication, breakdown assistance, repairs or specialist extraction work?

Bad weather left us at home in the shed, a short while longer a air rifle target was finished and ready to use.
Custom orders can be taken for these

Get in touch today.

📞 07777 115602
📧 [email protected]

🔧 Agricultural & Plant Machinery
🔧 Industrial Engineering
🔧 Mobile Welding & Fabrication
🔧 Hydraulic & Mechanical Repairs
🔧 Breakdown & Emergency Call-Outs
🔧 Specialist Extraction & Thread Repairs

05/06/2026

Now live on eBay

https://ebay.us/m/sJbuvY

05/06/2026

🔥 A big congratulations to our friends at Fire & Flow Sauna on their official opening today! 🔥

If you're looking for a great way to relax, unwind and recharge, be sure to check out their page and book yourself a session.

It's always great to see local businesses growing and bringing something different to the area, so let's show them some support and help spread the word.

Head over to their page for more information, availability and bookings.

Best of luck from all of us at Aim Engineering – we're sure it's going to be a huge success! 👏🔥

We are officially opening Friday 5th June at .fitness in Harleston.

Bookings are open for that whole weekend, head to our website www.fireandflowretreat.co.uk to book 🧡

Huge thank you to everyone who has supported us so far.

We cant wait to meet lots of you soon in the heat 🧡💐

Lots of love
Greg + Jess
Xx

05/06/2026

🚜 BROKEN DOWN? LOSING TIME? NEED IT FIXED PROPERLY? 🔧

Every hour a machine sits idle costs money.

Whether it's a tractor that won't start, a baler that's stopped in the middle of a field, a telehandler with hydraulic faults, a trailer with brake issues, or industrial equipment causing headaches, Aim Engineering is here to get you moving again.

✅ Agricultural Machinery Repairs
✅ Plant & Industrial Equipment
✅ Welding & Fabrication
✅ Hydraulic Repairs
✅ Electrical Fault Finding
✅ Servicing & Maintenance
✅ Trailer & HGV Repairs
✅ Emergency Breakdown Call Outs

With years of hands-on experience across agriculture, industry and heavy machinery, we don't just replace parts and hope for the best — we find the fault, fix it properly and keep your equipment working when you need it most.

From routine servicing to complex breakdowns, we're equipped to work both on-site and in our workshop.

📍 Covering Norfolk, Suffolk and surrounding areas.

If you've got a machine that's been parked up because nobody can diagnose it, give us a call.

📞 07777 115602
📧 [email protected]

Aim Engineering

"You're better off asking what can't we fix?"

👇 Message the page, call, text or WhatsApp to discuss your repair.

30/05/2026

Sweaty Saturday completed 🥵😴

After spending the morning cleaning the horse lorry we were called out to this lovely Deutz with a leaking transmission oil cooler for a new customer this evening

Couples of options offered to the customer with what we can do today to get them going again

3rd cooler fitted to the machine so will be back to diagnose the root cause of this but for now the end tank has been cleaned up and applied a belzona polymer composite to stop the leaks and allow the customer to get back to work

📞 07777 115602
📧 [email protected]

🚜 Agricultural & Industrial Engineering
🔧 Welding & Fabrication
⚙️ Mechanical & Electrical Repairs
💧 Hydraulic Repairs & Hose Replacement
🚛 HGV, Trailer & Plant Repairs
🛠 Mobile & Workshop Services
🚨 24/7 Breakdown Cover

Covering Norfolk, Suffolk & surrounding areas.

30/05/2026

Now on eBay

https://ebay.us/m/sJbuvY

🐴 DAF 45 130 Turbo 7.5T Horsebox For Sale 🐴

Teamed up with JB's Scrap and Unwanted Vehicles for this one

1994 DAF 45 130 Turbo powered by the reliable Cummins 5.9 engine.

✅ MOT until September
✅ Approx. 212,000kilometres
✅ Good tyres all round
✅ Floor and chassis in good condition
✅ Ramp repaired
✅ Double sleeper platform above cab
✅ Kitchenette area with sink and twin-burner gas hob
✅ Night heater fitted and working
✅ Plenty of storage space and cupboards
✅ Two horse area to rear with access from living area

Full underside inspection carried out, brakes checked and adjusted
all airlines etc checked and any damaged lines or fittings have been replaced
Oil and filter changed, fuel pump timing adjusted
Rear ramp has had extensive repairs while in the workshop, both sides have had repairs and strengthening to the main ramp bodywork as well as the hinges too.

A solid, honest horsebox that has been prepared for sale and is ready to go. Starts, runs and drives well. Ready to jump in and use straight away!

Can provide fully undersealed as well for additional cost.

Video in the comments

💷 £4,995

📞 07777 115602
📧 [email protected]
Located in Harleston Norfolk
Viewing welcome. Message or call either myself or Joel Bond for more information.