What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

STOLZ

Innovative Engineering business offering Functional Safety and specialised Instrument and Control services. Located in the UK, supporting clients globally.

01/06/2026

STOLZ are proud to be the main sponsor for THE IMPOSSIBLE MILE charity event run by Lifetime Fitness in Grimsby, for the Sunflowers Children’s Action Group 🌻

All profits from the event go to the Sunflowers Children’s Action Group!

THE IMPOSSIBLE MILE 🏃‍♂️‍➡️
26TH JULY 2026 | KING GEORGE V STADIUM | 10AM
This isn’t just a race - This is a decision.

THE CHALLENGE
400m Burpee Broad Jumps
400m Walking Lunges
400m Bear Crawl
400m Run
One mile.
Four movements - No shortcuts.

You can take it on:
* SOLO 👱
* OR AS A DOUBLES TEAM 👩‍❤️‍👨

* Official chip timing 🕛️
* Elite Mile Finals
* Crowd challenges
* Kids involvement

DO YOU HAVE WHAT IT TAKES?
📍 King George V Stadium
📅 26th July 2026
⏰ First wave starts at 10AM

21/05/2026

Developing Robust Safety Requirements Specifications (SRS) for Functional Safety Compliance

The Safety Requirements Specification (SRS) defines how Safety Instrumented Functions must perform. A well-structured SRS provides the foundation for design, verification, testing, and lifecycle management.

STOLZ supports clients in developing clear and compliant SRS documents aligned with IEC 61511 functional safety requirements.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

19/05/2026

Developing Proof Test Procedures incorporating Device Safety Manual Requirements.

Proof testing is essential to ensure Safety Instrumented Functions continue to meet their required SIL performance.

Effective procedures must incorporate requirements from device safety manuals and functional safety standards such as IEC 61508 and IEC 61511 for the process industry.

STOLZ develops structured proof test procedures that support compliance, traceability, and effective testing in operation.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

14/05/2026

Simplifying SIL Verification Using Dedicated Calculation Software

SIL verification requires careful analysis of failure rates, test intervals, architecture, and diagnostics.

STOLZ uses dedicated SIL calculation software to efficiently perform reliability calculations and document results. This helps clients demonstrate compliance while ensuring safety systems are robust and correctly engineered.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

12/05/2026

Or***ce Plate Engineering: Design, Specification and Procurement

Or***ce plates remain one of the most widely used methods of flow measurement in industrial processes. Correct design and specification are essential to ensure accuracy, repeatability, and long-term performance.

STOLZ supports clients with or***ce plate design, specification, and procurement to ensure reliable flow measurement solutions.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

***cePlate

07/05/2026

Thermowell Engineering: Design, Specification and Procurement

Thermowell design plays a critical role in temperature measurement reliability and mechanical integrity.

Incorrect design can lead to vibration failures or inaccurate measurements.

STOLZ supports clients with thermowell design, specification, and procurement, ensuring compliance with recognised engineering standards and operational requirements.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

05/05/2026

Managing Obsolescence: Specifying Replacement C&I Equipment for Reliability and Maintainability

Instrumentation and control equipment eventually reaches end-of-life or becomes obsolete. Upgrades provide an opportunity to improve reliability, maintainability, and performance.

STOLZ supports clients in specifying replacement C&I equipment that ensures long-term operational resilience.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

30/04/2026

Closing the Gaps: SIS Gap Analysis for Existing Installations

Many plants operate Safety Instrumented Systems that were designed under earlier standards or project conditions.

A structured SIS gap analysis can identify where systems fall short of IEC 61508 lifecycle requirements.

STOLZ helps clients identify gaps, prioritise improvements, and develop practical action plans to maintain safe operation.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

28/04/2026

SIL Reliability Calculations: Ensuring Your Safety Functions Meet Required Integrity Levels.

Accurate SIL reliability calculations are essential to demonstrate that Safety Instrumented Functions achieve their required integrity levels.

STOLZ performs detailed SIL verification and reliability analysis using either client standard or our dedicated calculation tool. This ensures safety functions are properly designed, documented, and compliant with functional safety standards.

We review LOPA outcomes, operational requirements, testing intervals, device specific safety manual requirements and more, its not a one size fits all approach from us.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

23/04/2026

Writing Effective C&I Specifications for Client Tenders

Clear and technically robust C&I specifications are essential for successful tendering and procurement. Well defined specifications ensure suppliers provide equipment that meets performance, reliability, and safety requirements.

STOLZ supports clients in preparing detailed specifications that help projects start on the right technical foundation.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

Address

14 Town Hall Street
Great Grimsby
DN311HN

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Website

http://www.stolzltd.com/

Alerts

Be the first to know and let us send you an email when STOLZ posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Equipment Service in Great Grimsby?