David Moore Engineering

David Moore Engineering An engine shop with experience in both machining and building classic and race engines from road-going Ferrari v12's to Goodwood winning V8 race engines.

Honda F20C head given the full DME treatment 🔧🔥This S2000 cylinder head has been fully stripped, inspected and machined,...
04/09/2026

Honda F20C head given the full DME treatment 🔧🔥

This S2000 cylinder head has been fully stripped, inspected and machined, with everything brought back exactly where it needs to be.

There’s something very satisfying about seeing a cylinder head looking like this before it goes back together. 👌

➡️ Follow for more engine machining, builds and proper engineering.

03/09/2026

A few highlights from the DME YouTube channel… 🎥🔧

If you enjoy seeing proper engine machining, engine builds and some very special cars, this is only a small taste of what we get up to in the workshop.

From Ferraris and historic race engines to performance builds and the occasional engineering problem that fights us all the way. 😂

➡️ Watch the full videos on YouTube — David Moore Engineering

🔔 Subscribe and follow the builds from start to finish.

Another Ferrari 308 block ready to go. 🐎🔧This one belongs to and has been through the full overhaul here at DME.Machine...
02/09/2026

Another Ferrari 308 block ready to go. 🐎🔧

This one belongs to and has been through the full overhaul here at DME.

Machined, measured and rebuilt properly, ready for the next stage of what’s become a seriously exciting project.

If you’ve been following the build on YouTube, you’ll know just how much work has gone into getting this 308 engine right. 🎥

➡️ Follow for more Ferrari engine builds, machining and behind-the-scenes workshop content.

🏎️ Ferrari 288 GTO cylinder heads… back to perfection. 🇮🇹After refacing these incredibly rare cylinder heads, we re-mach...
27/07/2026

🏎️ Ferrari 288 GTO cylinder heads… back to perfection. 🇮🇹

After refacing these incredibly rare cylinder heads, we re-machined the squish bands to restore the correct combustion chamber geometry. ⚙️

📐 Precision refacing
🔧 Squish bands re-machined
🏁 Ready for the next stage of the rebuild

It’s the attention to detail that makes all the difference when working on engines of this calibre. 👌

📩 Looking for specialist machining for your classic or performance engine? Get in touch.

22/07/2026

⚖️ Perfect balance. Maximum performance. ⚖️

Watching a V8 crankshaft spin up on our balancing machine never gets old. 👌

🔧 Precision dynamically balanced
📐 Reduced vibration
⚙️ Smoother running
🏁 Built for reliability and performance

Every gram matters when you’re building high-performance engines. 💪

📩 Need your engine components professionally balanced? Get in touch.

16/07/2026

🔥 Double the CNCs. Double the precision. 🔥

Both of our machining centres hard at work. 👌

🛠️ One machining a block for Darton MID sleeves
🏎️ The other machining a Ferrari cylinder block

Precision engineering, every day. ⚙️

📩 Need specialist machining for your classic or performance engine? Get in touch.

15/07/2026

🏎️ A little taste of our latest YouTube video… 🔥

We’re machining Ratarossa’s Ferrari 308 cylinder block as it takes another step towards becoming the ultimate engine. ⚙️

🎥 Here’s a few of our favourite moments—but the full story is now live on YouTube!

👉 Head over to David Moore Engineering to watch the full build.

📩 Let us know what you think in the comments!

13/07/2026

✨ Jaguar cylinder head completed. ✨

This one received the full David Moore Engineering treatment:

🔧 Modified valve guides
⚙️ New valve seats
📐 Camshaft bucket sleeves bored
🛠️ Bucket hold-downs machined
✨ Faced on all 3 gasket faces

Built with precision, ready for performance. 💪

📩 Need machining for your classic or performance engine? Get in touch.

✨ Jaguar cylinder head completed. ✨This one received the full David Moore Engineering treatment:🔧 Modified valve guides⚙...
08/07/2026

✨ Jaguar cylinder head completed. ✨

This one received the full David Moore Engineering treatment:

🔧 Modified valve guides
⚙️ New valve seats
📐 Camshaft bucket sleeves bored
🛠️ Bucket hold-downs machined
✨ Faced on all 3 gasket faces

Built with precision, ready for performance. 💪

📩 Need machining for your classic or performance engine? Get in touch.

Address

Unit 3 Grainstore, Waterhouse Farm, Ivy Mill Lane
Godstone
RH98NE

Opening Hours

Monday 8:30am - 6pm
Tuesday 8:30am - 6pm
Wednesday 8:30am - 6pm
Thursday 8:30am - 6pm
Friday 8:30am - 6pm
Saturday 9am - 1pm

Website

Alerts

Be the first to know and let us send you an email when David Moore Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to David Moore Engineering:

Shortcuts

Share

Category