Powerhand

Powerhand Designers and manufacturers of specialist materials handling equipment for the rail, construction, forestry, sawmill and recycling industries.

This is the ultimate combination for railway work…the Powerhand CS500 clamshell bucket and MenSe brush cutter.The CS Ser...
29/05/2026

This is the ultimate combination for railway work…the Powerhand CS500 clamshell bucket and MenSe brush cutter.

The CS Series was specifically designed for use on the railway with the ideal geometry for loose material handling, whilst being strong enough to withstand the downward pressure of light digging operations. It’s also available with an optional sunken quick change coupler system to allow rapid changeover of attachments, even in height-restricted environments.

The MenSe brush cutter is the optimal choice for the safe and efficient removal of vegetation beside the railway. The two reciprocating blades move in a sc******ng motion to neatly cut both horizontally and vertically. This specific cutting action stops debris from being thrown into tracks or nearby power lines.

Give us a call or email for more information.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

The VRS Drive-In takes a different approach to the rest of the VRS range.Where a fixed VRS180 or VRS200 setup suits oper...
26/05/2026

The VRS Drive-In takes a different approach to the rest of the VRS range.

Where a fixed VRS180 or VRS200 setup suits operators looking for a dedicated dismantling machine, the Drive-In is designed for yards that need a bit more flexibility. The clamp legs can be fitted in minutes, moved between machines and put straight to work without committing one machine full-time.

It really comes down to how your yard is set up and the level of flexibility you need.

Chat to the team to find the right set-up for you. ✅

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

20/05/2026

An engine being processed with the Powerhand ERS.

Crush the engine > remove heavy steel components > less stress on shredders

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

Tracked excavator or wheeled material handler?We’re seeing the Powerhand VRS working well on both, and it usually comes ...
19/05/2026

Tracked excavator or wheeled material handler?

We’re seeing the Powerhand VRS working well on both, and it usually comes down to how the yard is run.

If the machine is staying on dismantling work, a tracked excavator is often the obvious choice. If it needs to move around the yard and cover more than one task, a wheeled material handler starts to make more sense. Material handlers are commonly positioned for scrap and recycling applications, while tracked machines are often chosen where a more dedicated setup is needed.

Different base machines, same end goal: extract more value from every vehicle before it reaches the shredder.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

13/05/2026

Arborculture Wales caught the Powerhand EX25 grapple saw in action down in South Pembrokeshire last week 😮‍💨

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]



Wacker Neuson
Clark Engineering

Powerhand EX25 🤝 Hyundai HW100ASupplied by Quality Fleet Service, our US distributor, the Powerhand EX25 grapple has bee...
10/05/2026

Powerhand EX25 🤝 Hyundai HW100A

Supplied by Quality Fleet Service, our US distributor, the Powerhand EX25 grapple has been paired with a Hyundai HW100A wheeled excavator for Goshen DPW.

A strong setup for crews needing mobility, control and serious handling capability on site.

It's great to see more Powerhand attachments heading out in North America.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

The Powerhand VRS system is all about extracting more value from every vehicle.Power where it’s needed, precision where ...
06/05/2026

The Powerhand VRS system is all about extracting more value from every vehicle.

Power where it’s needed, precision where it matters. 🦅

From wiring looms through to full engine and suspension removal, it allows operators to break vehicles down properly, not just pull them apart.

In a demanding environment, that difference adds up quickly.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

The Powerhand EX28 rotating forestry grapple was caught basking in the short-lived sunshine recently by Yarwoods Excavat...
29/04/2026

The Powerhand EX28 rotating forestry grapple was caught basking in the short-lived sunshine recently by Yarwoods Excavator Attachments.☀️

It was soon back to work with plenty timber to move on site.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

22/04/2026

A full range of grapple saws, built for different machines and different ways of working.

From tree care setups with worm drive systems, through to tiltrotator configurations, crane-mounted units and heavier forestry packages for site clearance and large timber.

Each one designed around the job it’s doing, but all built with the same focus on control, durability and performance on site.

💻 www.powerhand.com
📞 01387 860241
📧 [email protected]

Address

Dumfries

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+441387860241

Website

Alerts

Be the first to know and let us send you an email when Powerhand posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Powerhand:

Shortcuts

Share

Category