Here at Mac Tints we believe your car should always look its best, with our Flyeye tint film for front and rear lights it will transform the way your car looks by giving your front/rear or all lights, a new dark smokey look with little cost. Flyeye is an exciting new headlight and rear cluster tinting mesh that sticks to the outer surface of any light creating a factory finish dark smoke effect. T
here is no need to remove the light fitting. Flyeye has excellent durability with great resistance to most road and weather conditions. Flyeye can be removed with little or no adhesive residue. Flyeye - Note
Please note that high-intensity discharge light bulbs (H.I.D/Xenon) may cause excessive heat build-up under sustained high beam use. This may result in melting of the Flyeye vinyl. Normally if the high-beam bulb has a silvered tip or a cowling in front of it, then this should be acceptable. The light clusters that have a protective coating or lacquer are unsuitable for applying Flyeye. Like many vinyls it may damage this coating when the Flyeye is removed. Flyeye may not be suitable for installation on to non-factory or aftermarket fitted light clusters or where high intensity bulbs have been installed above factory guidelines. You must check before installation that the headlight is suitable. MOT rules and regulations state:
1.2: Headlights
A pair of headlights must: emit light of substantially the same colour and intensity. emit a steady colour of either white or yellow. be visible from a reasonable distance.
1.3: Brake lights
A brake light must emit a steady red light. At least 50% of the lamp must be visible from the rear Light must be visible from a reasonable distance
1.4: Reflectors
At least 50% of the reflecting surface must be visible from a reasonable distance.
1.5: Indicators
Every indicator must emit amber light. At least 50% of the lamp must be visible. Light must be visible from a reasonable distance. A headlamp or rear tail lamp altered in this way is not a reason for MOT rejection. So long as light outputs are not adversely reduced, it emits the appropriate correct colour and the mask is securely attached.
