WeldDon

Directions Website Contact the business

WeldDon WeldDon – Custom Metal Gates & Fencing
📍 Doncaster + 20 miles | 🛠️ Design & Installation
🚪 Sliding

Not every property has a standard opening, and not every customer wants the same design. That is why made-to-order ironw...
17/10/2026

Not every property has a standard opening, and not every customer wants the same design. That is why made-to-order ironwork begins with understanding what the space needs and what the customer wants to achieve.

Whether it is a driveway gate, garden gate, railings or another metalwork project, there are several choices to consider. 📏

The level of privacy, the proportions, the decorative style and the finish all influence the final design. Practical details such as access, opening direction and installation requirements also need to be considered.

Sometimes the right solution is a simple design with clean lines. Other projects call for curved sections, traditional scrollwork or metalwork made to complement existing features. ✨

At WeldDon, we discuss these options with each customer and develop a solution around their property, rather than trying to make a standard design fit.

Have a project in mind? Get in touch and tell us what you are looking for.

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

A review like this says a lot because it mentions more than the finished metalwork.It also talks about doing what was ag...
09/10/2026

A review like this says a lot because it mentions more than the finished metalwork.

It also talks about doing what was agreed, keeping to the timing discussed and delivering the result the customer expected. 📏
For made-to-order ironwork, that matters. Each project involves decisions around measurements, design, finish, fabrication and installation, so clear communication is part of the process from the beginning.

The final result is what people see, but the experience also depends on the steps before it - the planning, the schedule and the way the work is carried out. 🔩
Thank you, Lawrence, for taking the time to leave this review. ✨

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

This area connects the back doors, steps and grass, so the railings needed to add safety and a clearer boundary without ...
02/10/2026

This area connects the back doors, steps and grass, so the railings needed to add safety and a clearer boundary without making the space feel heavy. 📏

The open vertical design keeps light moving through the French doors, while still giving the raised edge and steps more structure.

The height, spacing and position of the railings are important here because the area is quite narrow. Too much metalwork could make it feel closed in, but too little would not give the space the definition it needs.

The curved side detail softens the design and adds shape without overpowering the garden access. 🔩

This is where proportion matters. The finished metalwork has to support the way the space is used, while still sitting comfortably against the brickwork and garden setting.

📍 Doncaster, South Yorkshire
📧 [email protected]
🌐 www.welddon.co.uk

An open gate design creates a boundary without closing the frontage off completely. 📏Here, the vertical bars, spearheads...
25/09/2026

An open gate design creates a boundary without closing the frontage off completely. 📏

Here, the vertical bars, spearheads and curved top give the entrance more presence, while still keeping the property visible from the street.

The character of the finished gate comes from several design choices working together: the height, the curve, the spacing between the bars, the darker finish against the brickwork and the way the gates sit across the driveway.

A finished entrance is shaped by those decisions, not by one detail alone. ✨

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

Scrollwork, leaves, grapes and decorative shapes need to be placed with the rest of the design in mind. 🔩The spacing, cu...
18/09/2026

Scrollwork, leaves, grapes and decorative shapes need to be placed with the rest of the design in mind. 🔩

The spacing, curves and position of each element affect whether the finished piece feels balanced, too empty or too crowded.

Decorative ironwork is not only about choosing a feature. It is about how that feature sits inside the frame, how it relates to the other elements and how it changes the character of the finished gate.

Those decisions are made during the design and fabrication process, before the final piece is ready for its finish. ✨

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

A side gate may be smaller than the main gate, but it still affects how the entrance is read as a whole. ✨Its height, fi...
11/09/2026

A side gate may be smaller than the main gate, but it still affects how the entrance is read as a whole. ✨

Its height, finish, handle position, privacy level and alignment with the surrounding fencing or brickwork all need to be considered.

When the side gate matches the main gate or other metalwork, the frontage feels more coordinated. When it is treated separately, the whole entrance can feel less balanced.

That is why the side access is not an afterthought. It is part of the overall design. 📏

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

Workshop measurements matter, but the final result also has to work in the actual setting. 📏During installation, the fra...
04/09/2026

Workshop measurements matter, but the final result also has to work in the actual setting. 📏

During installation, the frame, infill, fittings and clearances all need to be checked against the real space. This is where earlier design choices become visible as one finished entrance.

Here, the lower infill adds privacy, while the open decorative section above keeps the gate from feeling too closed.

The balance between privacy, proportion and detail is what changes the character of the finished gate. 🔩

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

A gate does not have to be fully open or fully enclosed. The design can sit between the two. ✨On this project, the lower...
28/08/2026

A gate does not have to be fully open or fully enclosed. The design can sit between the two. ✨

On this project, the lower section creates more privacy, while the decorative scrollwork above keeps the entrance lighter and more detailed.

That balance comes from choices made before and during fabrication: the height of the infill, the spacing of the frame, the position of the scrollwork and how the finish works with the surrounding setting.

The finished gate is not separate parts placed together. It is one design where privacy, decoration and proportions need to work as a whole. 🔩

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

The side gate, garage door and house exterior all sit within the same frontage, so the choices made for one element affe...
22/08/2026

The side gate, garage door and house exterior all sit within the same frontage, so the choices made for one element affect how the whole area looks. 📏

Here, the darker finish creates a clear contrast against the brickwork, while the fuller side gate design adds privacy and gives the entrance a more defined boundary.

The result comes from several choices working together: the level of privacy, the finish, the proportions and the way the gate sits next to the existing property features.

A change like this is not only about replacing an old gate. It changes how the whole entrance is framed. ✨

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

Before the gate has its final finish or decorative detail, the structure has to be formed correctly. 🔩At this stage, the...
14/08/2026

Before the gate has its final finish or decorative detail, the structure has to be formed correctly. 🔩

At this stage, the focus is on the frame, the joints and the alignment of the metalwork. These parts may not be the main feature in the finished photo, but they affect how the gate sits, opens and holds its shape.

A clean finished result depends on decisions made during fabrication, before the design is ready for coating or installation.

This is part of the process that is easy to overlook, but it shapes the final piece from the inside out. ✨

📍 Doncaster, South Yorkshire
📞 07884962703
📧 [email protected]
🌐 www.welddon.co.uk

Address

Unit 35a, Leger Business Park, Churchill Road
Doncaster
DN12TF

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm
Saturday 8am - 12pm

Website

Alerts

Be the first to know and let us send you an email when WeldDon posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to WeldDon:

Shortcuts

Share

Category