Complete CNC Solutions

Call Directions Website

Complete CNC Solutions High performance CNC routers, Router tooling, Cad Cam software, Service and Training EXCLUSIVE TEKCEL DISTRIBUTOR FOR THE UK

Magnetic vinyl should be knife cut, not routed. Route it and rotational friction generates heat that can melt the materi...
16/10/2026

Magnetic vinyl should be knife cut, not routed. Route it and rotational friction generates heat that can melt the material’s adhesive layer and leave a sticky mess behind.

The answer is not to keep adjusting router settings. It is to use the right cutting process.

A Tekcel router fitted with an OptiCut knife system lets you knife cut flexible materials such as magnetic vinyl as part of production, rather than cutting them by hand with a scalpel.

If magnetic vinyl is part of your work, make sure the machine is set up to deal with it properly.

See the Tekcel OptiCut knife system: https://completecnc.co.uk/addons-upgrades/tekcel-opticut/

13/10/2026

Correct tool insertion in the collet affects the grip supporting the cutter throughout the cut.
It is a basic point, but one that is regularly missed. A good cutter can still underperform when it is loaded incorrectly.

We have put together a short video covering the key checks for correct tool set-up in a collet.

Watch it before you load the next tool.

How much production time gets lost to manual tool changes? Jobs involving profiling, engraving, V-grooving, or drilling ...
29/09/2026

How much production time gets lost to manual tool changes?

Jobs involving profiling, engraving, V-grooving, or drilling can require several different tools. When each change needs operator involvement, those interruptions add up over a busy production schedule.

The Tekcel EXR 2m x 3m features a 17-bay Hide Away Automatic Tool Change system, allowing the machine to select the required tool as part of the machining process: https://completecnc.co.uk/tekcel-cnc-routers/tekcel-cnc-router-exr-2m-x-3m/

Automatic tool-length sensing also helps maintain accurate Z-depth control when tools are changed. This means less time spent interrupting production, and more time keeping jobs moving.

If you'd like to know more, or see the Tekcel EXR in action, contact us to arrange a demonstration at our Cheddar facility.

Call +44 (0) 1934 742 186 or email [email protected]

Can I trade in a CNC router from another manufacturer?Yes. If you’re considering upgrading to a Tekcel EXR, our Trade In...
25/09/2026

Can I trade in a CNC router from another manufacturer?
Yes. If you’re considering upgrading to a Tekcel EXR, our Trade In, Trade Up offer allows you to put the value of your existing CNC router or digital cutter towards a new machine.

You do not have to own a Tekcel. We consider trade-ins from all major CNC and digital cutter brands, subject to assessment and valuation.
Find out more or start your Tekcel EXR trade-in enquiry: https://completecnc.co.uk/upgrade-your-cnc-with-tekcel-exr/

What should actually drive your next CNC specification?Everyday production, an occasional job that helps secure a bigger...
22/09/2026

What should actually drive your next CNC specification?
Everyday production, an occasional job that helps secure a bigger contract, or a new application you hope to win?

They can all matter, but not necessarily for the same reasons.

Our latest blog gives you three practical tests to help decide what deserves a place in the specification. Read more: https://completecnc.co.uk/latest-news/choosing-your-next-cnc-router/

Flat ACM panels or folded sign trays? The material may be the same, but the finished component asks something different ...
17/09/2026

Flat ACM panels or folded sign trays?
The material may be the same, but the finished component asks something different of the production process.

Cutting a panel profile and preparing a component for folding are distinct requirements.

Our range includes FC V-folding tools for ACM. When discussing a tool, tell us what you’re making, alongside the material details and required finish.

That gives the enquiry a clear purpose: tooling for the job you need to deliver.

Explore the tooling range or contact us about your application: https://completecnc.co.uk/products/

On an acoustic panel, one rough slot does not sit on its own. The same feature appears across the complete surface and m...
03/09/2026

On an acoustic panel, one rough slot does not sit on its own. The same feature appears across the complete surface and may need to align with the next panel.

Don’t inspect the first panel and assume the run will stay the same. Place the first and last panels together. Compare the same slots or perforations on each. Check the edges for signs of cutter wear and confirm that the pattern continues correctly across adjoining sheets.

Record the tool and its cutting time before the next batch. That gives the team a clear reference for changing the cutter before the finish drops below the approved standard.

The tool and cutting strategy still need to suit the panel surface and finish required. Comparing the first and last panels shows whether that choice held across the run.

One approved panel proves the setup can start correctly. The last panel shows whether it stayed there.

Do you need a second router, or a stronger replacement?Both can increase capacity. They do not solve the same problem.A ...
01/09/2026

Do you need a second router, or a stronger replacement?
Both can increase capacity. They do not solve the same problem.

A second router makes sense when the current machine is already productive and there is enough suitable work to keep another one running.

An upgrade makes more sense when capacity is being lost to manual tool changes, limited material capability, inconsistent performance, or jobs the current machine cannot take on properly.

Before committing to another machine, separate productive cutting time from time lost around the process. Then look at the work being delayed, declined or subcontracted because of the limits of the current setup.

That tells you whether the business needs another version of the capacity it already has, or a stronger production platform.

See what our fully equipped Tekcel EXR Trade In, Trade Up package includes: https://completecnc.co.uk/upgrade-your-cnc-with-tekcel-exr/

SINTREX expanded PET sheet entered the UK sign and display market this year. It can be printed, cut, milled, folded, ben...
26/08/2026

SINTREX expanded PET sheet entered the UK sign and display market this year. It can be printed, cut, milled, folded, bent and thermoformed, giving signmakers and display producers another option for indoor and outdoor work.

SINTREX is described as easy to process. The point is not that this particular material should be difficult. It is one example of a much wider change.

More sheet materials are reaching the market. Different cores, surface finishes and recycled content give businesses more ways to answer a customer's brief, but they also make current cutting knowledge more important.

Supplier information tells you what a material can do. A controlled cutting test confirms the tooling and settings your own job requires before a new sheet goes into production.

If you run a Tekcel router and are unclear about how to approach a new material, send us a sample. Our team can test it and advise you on the tooling and cutting approach.

Call us on 01934 742 186 or use our contact form: https://completecnc.co.uk/contact-us/

Address

Charwell House, Unit 3a Cheddar Business Park, Wedmore Road
Cheddar
BS273EB

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+441934742186

Website

Alerts

Be the first to know and let us send you an email when Complete CNC Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category