21/06/2023
8 Port Switch. Can be wall, desk or mag mounted.
DINIC N-SW-8A 8 Port Gigabit Switch 10/100/1000Mbit
The 8 Port 10/100/1000Mbit switch (N-SW-8A) has been designed for easy installation, high performance and reliability. It delivers maximum speed on all ports, even if the full-duplex mode is fully utilized. Each port has automatic crossover detection, which allows the uplink to another switch without crossover cable. The compact and robust design includes an internal power supply and is ideally suited for SOHO or workplace. Each port can be connected with any kind of network technology, incl. other switches, computers, servers, television, etc. and will be recognized automatically and connect the device.
Features:
8 Ports
MAC address entries 1K / 4 K
Cache N/A
Jumbo frames 9 KB
LED for link, power, 1000M
Power supply internal 100-240V/AC, 50~60Hz
Power consumption max. 6 Watt
Certificates FCC Class B, CE
Mount by Wall Mount, Mag Mount or Free Standing with pads
Euro 2 Pin figure 8 cable included.
Size 183 x 82 x 31 mm
Weight 0.4kgs
Operating Temp 0 to 45*C
Storage Temp -20 to +90*C
Humidity 10 to 90%
FCC Class B, CE
Recommended Cables CAT5E, CAT6, CAT6A
Filter and Forwarding Rates 1000Mbps port – 1,488,000pps, 100Mbbs 148,800pps, 10Mbps 14,880pps
Architecture: Store and Forward
Buffer Memory N/A
Non Blocking and non head of line blocking full wire speed forwarding
Store and forward switching method
Auto negotiation and auto MDI/MDI-X
Supports Flow control: back pressure for full duplex
Internal Power Supply
Magnet, wall or desktop monunting
Standard:
IEEE 802.3 10BaseT
IEEE 802u 100BaseTX
IEEE 802.3ab 1000BaseT
Link:- https://www.headingpower.com/showproduct.aspx?ProductID=3132&SEName=n-sw-8a-dinic-8-port-gigabit-switch-10100-1000m
IEEE 802.3x Flow Control
