CW Welding and Repair

CW Welding and Repair Fully Insured
Mobile Welding and Fabrication
Welding Repairs
MIG/TIG/ARC Welding
Mag Drilling

25/12/2025

Wishing all my customers and friends a very merry Christmas from CW Welding and Repair 🎄

Dung grab that had been previously farmer fixed after catastrophic failure, repaired and reinforced with a heavier wall ...
13/12/2025

Dung grab that had been previously farmer fixed after catastrophic failure, repaired and reinforced with a heavier wall box section to attach the rams to.

Another customer made heavy duty cattle feeder ready to have crash barriers fitted around the bottom.
06/12/2025

Another customer made heavy duty cattle feeder ready to have crash barriers fitted around the bottom.

Large sheeted sliding door fabricated and installed.
06/12/2025

Large sheeted sliding door fabricated and installed.

Custom made galvanised steel hoppers/downspouts for in parlour feeders, designed/fabricated/installed
29/11/2025

Custom made galvanised steel hoppers/downspouts for in parlour feeders, designed/fabricated/installed

Heavy duty galvanised steel slurry slat fabricated, to replace old concrete slats and optimise the pre existing automati...
12/06/2025

Heavy duty galvanised steel slurry slat fabricated, to replace old concrete slats and optimise the pre existing automatic scraper system by adding more gaps which are oriented in the same direction as the scraper, meaning more slurry goes down the slats rather than being left sat on top.

Larger Pipework fabricated for a trailing shoe on a slurry tanker allowing a larger macerator to be fitted, as well as k...
04/06/2025

Larger Pipework fabricated for a trailing shoe on a slurry tanker allowing a larger macerator to be fitted, as well as keeping the Pipework out of harms way and preventing flexible pipes kinking.

New floor and cutting edge fitted to worn out and cracked loader bucket.
29/05/2025

New floor and cutting edge fitted to worn out and cracked loader bucket.

Completely rusted out end of a field roller replaced and crack on the other end repaired.
21/05/2025

Completely rusted out end of a field roller replaced and crack on the other end repaired.

Field roller repaired after a catastrophic failure, snapped bar was sleeved internally to add strength and ends rebuilt ...
13/04/2025

Field roller repaired after a catastrophic failure, snapped bar was sleeved internally to add strength and ends rebuilt using 6mm plate.

Very heavy duty draincover for high traffic area fabricated and sent off to be galvanised.
10/04/2025

Very heavy duty draincover for high traffic area fabricated and sent off to be galvanised.

Broken tractor exhaust snapped off due to stress cracks repaired.
06/04/2025

Broken tractor exhaust snapped off due to stress cracks repaired.

Address

Bude
Bude
EX238

Website

Alerts

Be the first to know and let us send you an email when CW Welding and Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CW Welding and Repair:

Shortcuts

Share

Category