B H auto services

Call Directions

B H auto services Welding and fabrication from your stainless exhaust system to vehicle modifications and everything inbetween!

Chech out our website for our off the shelf items or get in touch for custom work! :https://www.bhautomotive.co.uk/

5% off over £500 / 10% off over £1000 DISCOUNTWe wanted to thank you all for the support we’ve received this summer and ...
13/10/2026

5% off over £500 / 10% off over £1000 DISCOUNT

We wanted to thank you all for the support we’ve received this summer and give something back to our customers and the 4x4 community, so we’ve decided to put up a site wide discount on a limited number of orders!

- Spend over £500 and receive 5% off
- Spend over £1000 and receive 10% off

Also our standard Defender TD5 airbox’s are currently £100 off, so now is a better time than ever to upgrade your intake ahead of winter.

Make sure you don’t risk being disappointed and get your orders in asap before the discount ends.

We are also taking bookings for custom work between now and the new year, so if you’ve got anything in mind, give us a call and get booked in!

Link in bio or below 👇
https://www.bhautomotive.co.uk

What exhaust tip would you for on your truck?With all of our products designed and made in house the sky’s the limit. Wh...
11/10/2026

What exhaust tip would you for on your truck?

With all of our products designed and made in house the sky’s the limit.
Whether it be twin teardrops, a turndown or a classy rolled tip we’ve got it covered.

Our off the shelf options available via our website or for a one off give us a message to get booked in at our workshop!
Check out our website below or in our bio!
https://www.bhautomotive.co.uk/

🇬🇧🛠️ Built British, Built to Last 🛠️🇬🇧

Aluminium & Stainless Steel Repair Service Recently a customer came to us wanting a repair on his Hilux tipper due to da...
09/10/2026

Aluminium & Stainless Steel Repair Service

Recently a customer came to us wanting a repair on his Hilux tipper due to damage to the tail gate, and some welding on a ladder that had cracked.

We cut out the damaged section, cut a piece of Aluminium board to fit, welded it in and ground it back to a uniform finish.

We also offer an alloy wheel repair service! A cost effective way of saving a damaged wheel and keeping your pride and joy on the road.

Drop us a message or call if you’re after any repair work, specialising in Aluminium and Stainless Steel.

And as always, check out our range of 4x4 products at the link in our bio or below 👇 and get in contact for any custom fabrication work and repairs.

https://www.bhautomotive.co.uk

Defender 90 300TDI 3”’ ExhaustsExhausts for 300TDI 90’s are now available to order through our online store.- Designed t...
08/10/2026

Defender 90 300TDI 3”’ Exhausts

Exhausts for 300TDI 90’s are now available to order through our online store.

- Designed to replace your factory exhaust
- Lower EGT’s with a bigger diameter down pipe
- Optional silencer/muffler
- Fully tig welded
- Hand made in house
- Built to last

These can be fitted in house and customised to your needs.

If you can’t find what you’re looking for online, give us a call or a message as everything is made in house.

110 300TDI exhausts will be soon be available, but for those that can’t wait, drop us a message.

Check out our other exhausts and products at the link in our bio or below

https://www.bhautomotive.co.uk

Custom Visors/Peaks We are now offering custom sun visors/peaks for any and all vehicles.- Customised to suit your vehic...
07/10/2026

Custom Visors/Peaks

We are now offering custom sun visors/peaks for any and all vehicles.

- Customised to suit your vehicle
- Hand made in house
- Options to add light bars, beacons and more
- Options for for a variety of finishes including raw, black or colour matched

If this is something you’d be interested in, drop us a message and get booked in!

As always we stock a range of upgrades for your rig so check out our website at the link in our bio or below 👇

https://www.bhautomotive.co.uk

Is your truck missing something for this winters laning?With our fully sealed airbox and snorkel setups we can ensure no...
05/10/2026

Is your truck missing something for this winters laning?

With our fully sealed airbox and snorkel setups we can ensure no water is getting places you don’t want it and ruining your winters fun!

Unlike many of the products on the market our systems come standard with:
- Silicone coupler from MAF to airbox
- K&N washable filter ensuring smooth airflow
- Perspex air box top as standard slowing to to check your filters condition
- Our aluminium airbox that’s fully TIG welded
- Silicone from airbox to snorkel
- Our stainless snorkel handmade from 304 stainless and fully TIG welded (our 4” ling entry option here finished on our seamless brushed finish)
- All relevant hose clamps
- Rubber edging to go around your wing cut
- All nuts and bolts for fitting
- A choice of our interchangeable snorkel end caps

Check out our wide range of products and our options from raw stainless to gloss or mat in the link below or from our bio!
https://www.bhautomotive.co.uk/

🇬🇧🛠️Built British, Built to last🛠️🇬🇧

We don’t just work on Land Rovers, we work on everythingRecently a customer came to us wanting a fresh exhaust for his J...
01/10/2026

We don’t just work on Land Rovers, we work on everything

Recently a customer came to us wanting a fresh exhaust for his JCB Fastrac, being something a bit different we were really keen to get stuck into this one!

We can make exhausts for anything and everything so whether you’re after one for your VW UP or for your Merc Unimog we can accommodate!

All of our exhausts are hand made in house using 304 Stainless Steel.

🇬🇧🛠️British Built, Built to Last🛠️🇬🇧

With winter fast approaching, are you ready? Whether you’ve got to rescue your Nan from a flooded rural village, you fan...
30/09/2026

With winter fast approaching, are you ready?

Whether you’ve got to rescue your Nan from a flooded rural village, you fancy bombing it through Rufford Ford or just want some peace of mind out laning or at a pay & play, our stainless snorkels have you got covered!

Combined with our airbox’s and hard pipe kits we can keep your Land Rover intake fully sealed and ready for anything you may throw at it!

Check out our website for our Defender and Discovery 2 snorkels, airbox’s and hard pipe kits, all available in a range of finishes, and a choice of 🔴red 🔵blue or ⚫️black silicone.

We are also taking booking for custom snorkels and airboxes for any and all 4x4’s so don’t hesitate to drop us a message.

🇬🇧 🛠️ British Built, Built to Last 🛠️🇬🇧

Link in bio or below

https://www.bhautomotive.co.uk

We don’t just build 4x4’s, we use themAfter a busy summer of shows we decided to hit some lanes in Wales this weekend fo...
29/09/2026

We don’t just build 4x4’s, we use them

After a busy summer of shows we decided to hit some lanes in Wales this weekend for some fun.

After what seemed to be a bit of a grey Saturday, we got lucky and had one of the best sunsets we’ve seen in a long time!

Is your truck ready for winter adventures? If you’re unsure feel free to drop us a message to get booked in for any upgrades or fabrication work you may need!

As always, check out our range of products at the link below or in our bio

https://www.bhautomotive.co.uk

Custom Defender 110 County Exhaust (Hard Mounted, tear drop, side exit) An exhaust that stands out from the crowd, whils...
28/09/2026

Custom Defender 110 County Exhaust (Hard Mounted, tear drop, side exit)

An exhaust that stands out from the crowd, whilst keeping it stylish and out of harms way

Recently we had a customer come to us wanting something a bit different for an exhaust on his 110 county, with a few concerns at potential issues.

🔴 Exhaust rattling on the panel

🟢The exhaust has been made with an additional flexy on the rear section and then hard mounted to the chassis/body

🔴 Off road clearance

🟢 To deal with this we have routed the side exit to come out of the panel behind the second row doors, this combined with routing the exhaust entirely above the chassis keeps it well out of harms way and allows for the use of underbody protection

🔴 Customer was concerned about excessive noise but wanted to keep the TD5 sounding good

🟢 To resolve this we added a silencer which retained the usual TD5 tone but kept the volume at a reasonable level

If you’re after something similar or having issues with a project that you need a hand with, drop us a message and get booked in!

As always all of our usual stock can be found at the link in our bio or below.

https://www.bhautomotive.co.uk

Would you have an exhaust like this on your 110?

Address

Broadway
WR127PB

Telephone

+447538123990

Website

Alerts

Be the first to know and let us send you an email when B H auto services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share