Super Systems Europe

15/10/2026

Oxygen Probe for Carburising Furnaces

Zirconia Oxygen Probe

SSi Gold Probe

The SSi Gold Probe is the world’s best-selling zirconia oxygen probe for heat treatment furnaces. It is installed on thousands of sealed quench furnaces, continuous mesh belt furnaces, pusher, rotary, and pit carburising furnaces around the world.

Designed to measure and control oxygen, dew point, and carbon potential in the richest (high CP%) atmospheres with accuracy and repeat-ability, whilst being quick, easy and cost-effective to maintain and repair.

02/10/2026

eFlo Inline Meter

The eFlo Inline Meter is designed to display current and totalized gas flow. With simple compatibility with existing controls, tracking gas flows has never been easier.

Designed for use in the harshest industrial environments, eFlo Inline Gauge Meter allows for seamless integration into existing systems.

The eFlo Inline Meter is designed to display current and totalized gas flow. With simple compatibility with existing controls, tracking gas flows has never been easier. Designed for use in the harshest industrial environments, eFlo Inline Gauge Meter allows for seamless integration into existing sys...

24/09/2026

Analysers

Our analysers are designed specifically for the needs of heat treaters. We produce high and low range dew point analysers; NDIR gas analyser; H2 analysers; an oxygen and burner efficiency analyser (e-Trim); and the innovative CAT-100, a cost-effective, easy-to-use carbon analyser.

17/09/2026

Carburising Furnace Controller

SSi 9120

The powerful 9120 dual loop controller can control both temperature and atmosphere (carbon potential CP%, oxygen O2%, dew point, mV) on a endothermic gas generator, carburising sealed quench, pit, continuous mesh belt, cast link, or pusher furnace.

The instrument is developed to improve the visibility and ease of use of key parameters. It includes data logging/chart recording functions and advanced oxygen probe features such as multiple burn-off/purge features, alarms for high impedance and poor response which can aid predictive maintenance plans. The 9120 is ideal for endothermic gas generators.

For more advanced features such as recipe programming please see the SSi 9205.

SSi 9120 The powerful 9120 dual loop controller can control both temperature and atmosphere (carbon potential CP%, oxygen O2%, dew point, mV) on a endothermic gas generator, carburising sealed quench, pit, continuous mesh belt, cast link, or pusher furnace. The instrument is developed to improve the...

27/08/2026

Carburising Furnace Control Systems

Super Systems Europe has developed a standard cabinet for retrofit to pit furnaces, sealed quench furnaces, and continuous mesh belt and pusher furnaces. Our control systems have standard code and components and are customised per furnace specifications and customer requirements.

We have addressed almost every atmosphere application in heat treating with various control packages. The controls are designed to meet industry specifications such as AMS 2750, 2759, CE, NFPA. We build control panels that are efficient for operators to use, conserve floor space and include all drawing sets and installation services.

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

20/08/2026

Fixed Three Gas (CO, CO2, CH4) Gas Analyser

SSi MGA6010

The MGA6010 Fixed Three Gas (CO, CO2, CH4) Gas Analyser is a feature rich permanently mounted continuous gas analyser for monitoring, recording, controlling, and/or alarming furnace gas atmospheres. Continuous monitoring of furnace atmospheres improves the repeatability of a process and creates predictive maintenance parameters such as alarming from deviating or increasing CO, CO2, and CH4 values.

This can provide advanced warning of furnace soot problems, radiant tube cracks, water or air leaks. It uses SSi’s infra-red 3 gas sensor and additional analogue inputs or communications to calculate CP%, Kn*, and Kc*. CQI- 9 compliant users can fulfil the daily generator and furnace atmosphere verification automatically in conjunction with the included PC software.

Note the MGA 6010 is now available in 19″ rack mounted housing.

*With optional H2 sensor.

SSi MGA6010 The MGA6010 Fixed Three Gas (CO, CO2, CH4) Gas Analyser is a feature rich permanently mounted continuous gas analyser for monitoring, recording, controlling, and/or alarming furnace gas atmospheres. Continuous monitoring of furnace atmospheres improves the repeatability of a process and....

13/08/2026

NEW PRODUCT!

DPL5000

Meet the DPL5000—faster, smarter dew-point measurement in the field.

Building on the proven measurement performance of the DPL4000, the new DPL5000 adds a lighter handheld display, fast USB-C charging, onboard help and storage for up to 5.5 million data values.

Its high-accuracy sensor measures dew points down to −148°F (−100°C), while automatic calibration and sensor-purge functions support reliable readings and rapid response.

Can be connected permanently to a datalogger or read intermittently with the hand held unit.

Ideal for verifying that nitrogen or argon systems are dry enough for quenching as per NADCAP requirements.

06/08/2026

Carburising Simulation Software

SSi CarbCALC II

CarbCALC II is a proven software package designed to optimise heat treat cycles using input parameters of the type of steel, temperature, atmosphere and the specifications for case depth and carbon at case depth.

Features include:

Optimize carburizing process

Predict precise case depth

Computer-aided design of heat treatment processes

User-entered parameters [Temperature, Atmosphere; Case carbon; Alloy number (steel composition); Time; Circulation]

Quickly perform process experiments

Accurately predict the carbon content below the surface of the part, input process variables for simulation

Automatic segment calculation for Boost and Diffuse carburizing cycles based on case depth requirements

SSi CarbCALC II CarbCALC II is a proven software package designed to optimize heat treat cycles using input parameters of the type of steel, temperature, atmosphere and the specifications for case depth and carbon at case depth.

31/07/2026

Calibration Services

Super Systems Europe field engineers and workshop technicians are trained to deliver a wide range of UKAS traceable heat treatment calibration services in compliance with CQI-9 and AMS 2750 E.

Calibration, when built into a control plan that includes preventive, predictive, and planned maintenance, can play a valuable role in reducing unplanned downtime. Calibration improves process accuracy and identifies potential problems before they cause equipment or processing failures. It guarantees compliance to tough industry standards and provides documented quality assurance both internally and to all tiers of the manufacturing chain.

We have invested heavily in software, field and reference calibration equipment, and continuously developed quality controlled documentation and procedures in order to produce quick, reliable, and high value calibration and reporting services.

Our engineers are not simply calibration technicians. If a problem is diagnosed during calibration, we fix it.

Contact Brett Hill, Calibration Manager, with technical questions or to discuss our calibration contracts and services!

Calibration, when built into a control plan that includes preventive, predictive, and planned maintenance, can play a valuable role in reducing unplanned downtime. Calibration improves process accuracy and identifies potential problems before they cause equipment or processing failures. It guarantee...

23/07/2026

Super Systems Europe - Remote support Contracts

Designed to give you rapid technical and process support with the flexibility you need to control your costs.

SSE R1 – 1 hour remote support per month. SSE engineers will use either telephone, WhatsApp group, remote PC access via TeamViewer to support your SSI equipment between 8am and 4pm Monday to Friday. Cover includes technical support, software/firmware upgrades on instrumentation, SCADA software and gas analysers, plus any process support required.

Payment must be made in full on receipt of the initial/renewal invoice for the full year.

R2, R3, R4 and R5 contracts are available. If any further hours are required in a particular month, they can be purchased at a discount to our normal hourly rate.

Upon initiation of the contract, a WhatsApp group will be set up to provide rapid communication with our technical team. We will notify you within that group when the monthly hours start being used.

These contracts are for remote support only. If any issue demands a visit from an SSE engineer, this is chargeable separately.

SSE R1 – 1 hour remote support per month. SSE engineers will use either telephone, WhatsApp group, remote PC access via TeamViewer to support your SSI equipment between 8am and 4pm Monday to Friday. Cover includes technical support, software/firmware upgrades on instrumentation, SCADA software and...