Garage Equipment Online Limited

Garage Equipment Online Limited Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Garage Equipment Online Limited, Commercial and industrial equipment supplier, 1 Sandford Street, Birkenhead.
(2)

New lift day 🔧GEO 4 Tonne 4.3 Metre 4 Post Wheel Alignment Lift. In the door, bolted down, and running in three hours.Th...
29/07/2026

New lift day 🔧

GEO 4 Tonne 4.3 Metre 4 Post Wheel Alignment Lift. In the door, bolted down, and running in three hours.

That's the kind of turnaround we aim for every time. Minimal disruption, no half day lost waiting around, and a workshop back to earning by the afternoon.

The 4 post wheel alignment setup gives you the headroom for full vehicle drive-on work, proper geometry checks, and the kind of stability you want under heavier motors.

Got a job coming up and wondering what'll fit your bay? Drop us a message. Always happy to talk it through.

New kit on the workshop floor: the GEO U236 Fully Automatic Tyre Changer 🔧Built for the bays that don't stop. Run-flats,...
27/07/2026

New kit on the workshop floor: the GEO U236 Fully Automatic Tyre Changer 🔧

Built for the bays that don't stop. Run-flats, low-profiles, back-to-back services. It just gets on with it.

Two-year parts warranty as standard, so you're covered well past the busy season.

New balancer day at Apex Tyres Ltd in Chester. The 17-inch screen is bigger than our telly at home 😄We've just finished ...
24/07/2026

New balancer day at Apex Tyres Ltd in Chester. The 17-inch screen is bigger than our telly at home 😄

We've just finished installing the GEO PRO U895 Fully Automatic Wheel Balancer for the team.

Ordered, delivered, and fully calibrated inside three days, so there was zero workshop downtime while we got them up and running.

The U895 brings a high-resolution 17-inch LCD display, automatic input of distance and diameter, and an active safety hood. Daily wheel balancing stays fast, accurate, and easy on the operator.

Big thanks to the team at Apex Tyres for trusting us with the fitout.

Most four-post lifts get retired years before they should. Not because the kit failed, because a few small habits got sk...
22/07/2026

Most four-post lifts get retired years before they should. Not because the kit failed, because a few small habits got skipped.

We've pulled together three of the most common maintenance errors we see on workshop floors. The kind that quietly wear out platforms, bearings and hydraulic systems long before their time.

Our GEO 4 Tonne 4.3 Metre 4 Post Wheel Alignment Car Lift is the example, but the same weekly checks apply to almost any four-post in an MOT or alignment bay. Stick to them and you're looking at a decade or more of reliable service 🔧

Swipe through for the full checklist, and let us know which one catches your workshop out most often.

New tyre machine day at the workshop.The GEO U236 fully automatic tyre changer is in and ready, just in time for the sum...
20/07/2026

New tyre machine day at the workshop.

The GEO U236 fully automatic tyre changer is in and ready, just in time for the summer rush. Once the school holidays hit and everyone's heading off on long drives, the tyre bay gets hammered. Better to have the right kit in place before the queue builds up.

The U236 handles wheels up to 24 inch, and the twin assister arms take the fight out of run-flats and low-profile tyres. Less wrestling, fewer scratched alloys, faster turnaround on every job.

Fully automatic operation. 2 year parts warranty. Built to keep the bay moving when it matters most 🔧

If your current changer is starting to feel its age before the busy season hits, drop us a message and we'll talk you through the options.

Daily habits cause more scissor lift damage than heavy loads. 🔧Running a GEO 3 Tonne Mid Rise Car Scissor Lift? Three sm...
17/07/2026

Daily habits cause more scissor lift damage than heavy loads. 🔧

Running a GEO 3 Tonne Mid Rise Car Scissor Lift? Three small maintenance mistakes are usually what take a lift out of action, not the weight you put on it.

1. Skipping safety locks. Running with uneven locks strains the scissor mechanism and warps platforms over time.

2. Uneven loading. A 3-tonne rating only holds true when the vehicle is properly centred on the lift.

3. Ignoring fluid levels. Low hydraulic fluid causes jerky movement and overheats the motor.

Checking all three takes a few minutes at the start of the day. Replacing a motor takes days off the job, and days off the books.

Quick myth-buster for workshop owners 🔧Myth: a 2-year parts warranty covers everything that can go wrong with your lift....
15/07/2026

Quick myth-buster for workshop owners 🔧

Myth: a 2-year parts warranty covers everything that can go wrong with your lift.

Truth: it doesn't.

CE-certified 2-year parts cover manufacturing defects on the lift's core components. What it doesn't cover: wear items like cables, seals, rubber pads and bushings, plus any faults caused by incorrect installation or missed servicing.

That's why a separate maintenance contract matters. Annual LOLER inspections, scheduled servicing, and proper installation by a qualified engineer keep the warranty valid and the lift safe.

Worth knowing what's covered before you need to claim.

New balancer day in the workshop 🔧Meet the GEO PRO U895 Fully Automatic Wheel Balancer. 17 inch LCD screen, auto wheel s...
13/07/2026

New balancer day in the workshop 🔧

Meet the GEO PRO U895 Fully Automatic Wheel Balancer. 17 inch LCD screen, auto wheel sensor, faster cycle times and far fewer re-spins.

Less time per wheel, more cars through the bay. Simple as that.

Two year parts warranty, and you can lease one from £9.98 per week.

A worn tyre machine costs more in damaged rims and lost jobs than a quick service ever would.Most workshops only notice ...
10/07/2026

A worn tyre machine costs more in damaged rims and lost jobs than a quick service ever would.

Most workshops only notice the problem after a customer points at a scuffed alloy. By then the bill is already written.

Swipe through to see the three main wear points on a fully automatic machine like our GEO U236. We have mapped out the key checks for bead breakers, turntable play, and pneumatic assister arms 👍

Five minutes with this list could save you a week of headaches. Keep the machine sharp and the workshop keeps moving.

New tyre machine day. 🔧GEO U236 Fully Automatic Tyre Changer in the bay, up and running before lunch.Three tyres off the...
08/07/2026

New tyre machine day. 🔧

GEO U236 Fully Automatic Tyre Changer in the bay, up and running before lunch.

Three tyres off the rim already, and no more nipping next door to borrow theirs every time a job comes in.

Proper job done.

Address

1 Sandford Street
Birkenhead
CH411BN

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+441516014945

Alerts

Be the first to know and let us send you an email when Garage Equipment Online Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Garage Equipment Online Limited:

Share