Harbridge UK Engineering

Harbridge UK Engineering Harbridge UK Engineering specialises in providing precision engineered components and 3D printing services to clients throughout the UK.

We offer a range of precision machining services in various materials and 3D printing in various filaments or in resin

A faulty motor off an air compressor came into the workshop. The stator was set up into one of our lathes and skimmed . ...
06/03/2026

A faulty motor off an air compressor came into the workshop. The stator was set up into one of our lathes and skimmed . Stator was then coated in a clear insulated varnish, and motor was reassembled and then tested

A rather strange job came into the workshop, a motorbike to be totally rebuilt. The motorbike arrived in 1001 parts in ...
20/02/2026

A rather strange job came into the workshop, a motorbike to be totally rebuilt. The motorbike arrived in 1001 parts in a large plastic container and 2 wheels separate from the container.The frame and forks were stripped, sand blasted and resprayed. The majority of some of the parts had to be repaired, machined, new threads cut, resprayed and some replaced.

A job to repair an electric scooter came into the workshop to basically rebuild the electronic/electric wiring, fit new ...
09/02/2026

A job to repair an electric scooter came into the workshop to basically rebuild the electronic/electric wiring, fit new brakes and cables, and to manufacture a new floor plate out of aluminium 6mm block plate.

One of the many jobs that come into the workshop. A snapped off stud embedded into the wheel hub off a motorbike wheel. ...
09/02/2026

One of the many jobs that come into the workshop. A snapped off stud embedded into the wheel hub off a motorbike wheel. It was drilled out and removed using a stud remover, and then the damaged thread was recut and brake disc fitted with new M8 x 20mm stainless steel bolts.

A petrol engine driven go kart arrived in the Workshop with 2 warped and cut wrongly to size steering arms. As in the ph...
18/09/2025

A petrol engine driven go kart arrived in the Workshop with 2 warped and cut wrongly to size steering arms. As in the photos, you can see 2 new arms were machined to the correct size, painted, and fitted.

A yamaha 200c came into the workshop for an overhaul and replacement of all seals and gaskets. Also a repair to a cracke...
12/05/2025

A yamaha 200c came into the workshop for an overhaul and replacement of all seals and gaskets. Also a repair to a cracked crank case.

A job came into the Workshop today to manufacture test pieces out of GPR pipe for the electricity supply industry. Parts...
12/05/2025

A job came into the Workshop today to manufacture test pieces out of GPR pipe for the electricity supply industry. Parts were cut and machined to measurements supplied by the customer.

Today's job was an installation of a 24v mosfet 3D printing controller on a CTC CR10 3D printer. A raised outer housing...
05/03/2025

Today's job was an installation of a 24v mosfet 3D printing controller on a CTC CR10 3D printer. A raised outer housing box fitted to the main body controller unit (see pics). Mosfet was wired up and tested.

3D Printing of a helical gear in white ABS resin. Washed and cured.
01/03/2025

3D Printing of a helical gear in white ABS resin. Washed and cured.

A gear reducer from a vevor ice cream machine had just come into the workshop for a new rebuild, as neglect has caused t...
01/03/2025

A gear reducer from a vevor ice cream machine had just come into the workshop for a new rebuild, as neglect has caused the helical gears and bearings to seize and break. The gear reducer was stripped apart and cleaned in an ultrasonic cleaner. Old bearings removed and new bearings fitted,and old oil seals removed and new oil seals fitted aswell. Old helical gears were removed as well, and new gears were 3D printed in nylon. New gasket fitted and gear reducer reassembled. Cyclone blades fitted and assembly tested, then refitted back into the ice cream machine.

Address

The Workshop, 34 Derby Road
Birkenhead
CH427HB

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm
Saturday 9am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Harbridge UK Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category